Reviews
Paris-Dakar
Custom to Paris-DakarSpec. Kit has already been purchased, UnitGarage parts are good quality! View detail
![Screen [Sports touring]](https://img.webike-cdn.net/catalogue/images/30991/010_zerogravity_TS.jpg)
Fits: KAWASAKI ZX-14R, KAWASAKI ZZR1400, KAWASAKI HIGH GRADE
Only this Screen is available in winter.
The quality is an amateur's idea, but I would like it to be a little thicker because of its height.
[Color] I chose Smoke and it looks good.
I like the way the Motorcycle looks from the side, but from the front it looks ugly. LOL!
The effect of the double bubble is much better than that of the double bubble, so I am glad that I put it on.
View detail
Windproof effect is more than expected
It is difficult to feel the effect of the Screen when sitting, but when standing, you will feel the effect of the Screen when you are exposed to the wind. In fact, even when riding on a cold day, the way the body cools down is definitely different. I used to think that it was difficult to ride at high speeds in winter because of the wind pressure on my body, but after installing this windshield, I am not bothered by it at all. If the wind doesn't hit you, it might be better to remove the Screen in the summer.
It is a good purchase with a great Fit as it is a dedicated product.
View detail
![Windshield [Marc1]](https://img.webike-cdn.net/catalogue/images/82256/02MARC1_TS.jpg)
Fits: KAWASAKI ZX-25R, KAWASAKI ZX-25R SE, KAWASAKI ZX-4R SE, KAWASAKI ZX-4RR
Upgrading has been done:??
Installation was easy.
There is a small gap on the front tip, and the wind comes in through it, so it feels a bit awkward.
I like the design.
View detail
The best Screen for Touring
The wind hits the shoulders and arms, but the wind hitting the body is reduced to Large width.
The movable Screen is good because the height of the Screen can be changed depending on the situation.
With the MovableScreen in the low position, the wind hits the lower side of the HelmetScreen.
When set high, the wind will be above the HelmetScreen at highway speeds.
With the standard Screen, driving was scary at speeds above 80 km/h, but the wind no longer causes fear even when driving at speeds above 100 km/h.
As for the NGPoint, there were some holes where it was difficult to insert the well nut because the diameter of the hole where the well nut is inserted in the blanket was uneven. In this hole, the well nut was inserted to some extent and then pulled out with a bolt.
View detail
As Image
After installing Navigation and changing the position, a suitable Screen was found. View detail
Is it really for SV650?
To begin with, I don't think the Bolt holes and angles match the SV Meter cover. I barely managed to force it on with much difficulty, and it will probably not last long enough to come off. I think some people might have given up on installing it. It is an expensive product and I wish they had designed it seriously.
If it can be installed properly, the design is the best among Screen's many wildly different products.
View detail
Wind pressure prevention, mounting △
as per Title
Nothing wrong with wind pressure protection.
However
Part of the Screen interferes with the Brake tank on STD Handlebar
Light interference when changing the angle of the Handlebar.
Therefore, I changed from STD Handlebar to one with an increased BEET aperture angle, but I could barely get it to a position where it did not hit the tank when the Handlebar was turned off.
Screen and Brake tanks with some Clearance.
In the end, the Handlebar will only feel pulled back, and there will be no height flexibility at all.
Are you sure it's for a specific car model?
The build quality was solid, but the finish around it looked a little crude.
View detail
Satisfaction is satisfaction, but
I had a hard time fitting it because the holes were out of alignment, perhaps due to individual differences.
I bought it because I thought Gradation was a good Accent!
View detail
Just right for CROSS CUB
It is small as a screen, but is just the right size for a CUB.
I love it
View detail
Replaced from ZeroGra.
Installation is easy, even the well nut goes in easily if you are careful. No modification was required. However, it would be better to screw the tip of the nut to the cowl so that the gap between the nut and the cowl is small. The product is simply good and looks thicker and sturdier than the ZeroGlasses. Instead of that, the visibility [Color] The ZeroGlass cracked quite easily when impacted by a fall. I like the look and functionality of the ZeroGlass, but this time I decided to use the ZeroGlass! The fit with Cowl is not perfect, but I am satisfied with it. The wind protection effect is also naturally better than that of the NORMAL. I am glad to have bought this product. View detail
Fits: Others 50cc-750cc for each company/Pipe handle
Corre!
Effect as windshield, Design
If you are looking for a classic style, this is the one for you!
I thought that the effect as a screen would be a bonus, but it is effective enough!
The wind blowing on the chest area flows well and reduces fatigue to a great extent.
It may be a little difficult to mount on Symmetry, but if you are looking for something that can protect you from the wind, you can't go wrong with this! If you are looking for a good windshield, I think this is the one for you!
View detail
big
After purchasing the V-Stop, I was concerned about the wind noise with the NORMAL Screen, so I immediately purchased and installed it.
The Screen is ridiculously large, so after installation, the wind noise was reduced to Large width, so there is no loss in buying it. The only thing is that it is prone to minor scratches. I don't mind it.
View detail
Asahi wind shiled
Have lots of brands out there for wind shield of Honda Monkey125(jb03) But definately this brand looks fancy, great and qualitywise it's perfect This model was not made for Honda konkey125 but it fits View detail
Almost satisfied
I think the quality is very good, although the Bracket was bent, or I had to adjust it by bending it a bit to Center it out. View detail
![Screen [SR Type]](https://img.webike-cdn.net/catalogue/10369/image_20_271_TS.jpg)
It is okay
This is my 7th ZZr Screen. I really wanted to get the early Double Bubble, but it was out of print (I knocked it over and it broke), and the current one has a large gap, so I bought the SR Type because it is so lame that it looks like the screen is running. It is the same as the NORMAL type with the Zero Gravity Sticker. The transparency is high. That's all I have to say. After I bought this, I bought a-teah's [Color] I learned about the ClearColor series, next is a-teah! View detail
It will look Parenthesis better.
It looks very Race ish.
I don't ride face down very often, but I think a certain amount of wind protection can be expected.
It would be better to remove the Upper Cowl for installation.
I installed it without removing the Upper Cowl, but it was difficult to work because of interference between the plastic parts on the Meter and the Screw Grommet.
View detail
Good buy. Must wear in fall and winter!
[How is it used?
In use on NMAX 155.
We started using it in November in Kanto, where it has become a little chilly.
Was the one you received as per Image?
There was no Large Gap in the product performance itself, but the following two points were a little different from what I had imagined.
It was bigger than I thought it would be.
. more than I thought. [Color] It was Smoke (I was imagining something like Mellow Smoke).
Was the installation difficult?
There are no particular difficulties; simply remove the Mirror and re-tighten it together.
Since the MirrorMount Bracket is installed, it was a little troublesome to tighten it together with the MirrorMount Bracket in terms of adjusting the mounting holes.
How was your experience with it?
After installation, the effect was very Large and the running wind in my hands was drastically reduced.
When combined with Electrothermal Gloves, they run comfortably without any loss of warmth.
I have used it on rainy days, and it has a certain effect, though not as good as the Handlebar Cover.
Although the size is Large, the width fits inside the Mirror, so there is no problem with slipping through.
It is better to fine-tune the mounting position so that the finger fits firmly between the Brake lever and Knuckle guard.
If you install it with Rucksack re, you will lose the finger clearance and have to do the adjustment twice.
The effect of the installation is Large, so I plan to keep it installed through the fall/winter and early spring.
View detail
![[Repair/Option Parts] Windshield RS Series Shield Single Item](https://img.webike-cdn.net/catalogue/images/78207/97519_TS.jpg)
Fits: HONDA CT125, HONDA GROM
I can't get into it without Spacer and Rubber's Cushion.
I bought it to replace SS to RS, but it is inconvenient without Screw set. Without it, I can't get into it after all. It is not so different from buying the whole set. View detail
ExplorerWindshield
It works well for long-distance touring.
The appearance is controversial, but I think it looks cool in an Adventure style.
The Smartphone Holder can also be mounted, reducing eye movement when driving.
The installation was a bit odd in terms of positioning Large because the individual parts are separated, but I don't think it is a particularly difficult task.
View detail