Reviews
AELLAHigh Screen attached.
I generally like it.
The protective film was peeled off only at the screw holes, and then removed after installation and screw fastening.
View detail
It will be more windproof, but it will be a little firmer.
For 2011 MODEL (8BK-MC51) Windshield of.
The high transparency and lack of distortion are as expected from JAPAN alone.
To install, simply remove the four screws on the side of the screen and pull it while sliding it backward.
This product comes with the Rubber Bush for installation, so there is no need to remove the Bush from the OEM, just reuse the OEM Screw to secure it. I was able to install it without feeling like it was going to crack like other Reviews and without any Gap in the Screw hole.
No problem with machining accuracy.
The OEM product is designed to be flush with the cowl, but this product is designed to be under the cowl, so there is a difference in the thickness of the cowl. It would be great if the two were flush, but since the manufacturing process is different, it would be difficult to achieve this.
The test run felt that the wind protection was quite effective.
The wind pressure against the body is considerably reduced, and before you know it, the speed has increased.
Wind noise emanating from the Screen and Cowl is not perceptible, but unfortunately I did not get the impression that the sound felt through the Helmet was any smaller. Still, I think that fatigue after a long-distance run will be lessened.
Also, the standing screen may be due to the load on the front due to wind resistance, which reduces the fluttering sensation and makes it more difficult to turn the wheel.
Originally, the front of the '23 model had a sturdier feel, but it now feels as if it is about 10% heavier.
Styling-wise, the +6cm height of this product gives a rather smoky feeling depending on the angle of view, so it would be very well put together if it were lowered by about 2cm more. However, the limit is not broken, and as you get used to seeing it, it seems to match the CowlDesign of the 23rd model, which has increased volume.
Based on the above, we can say that the satisfaction level is high from the balance of the experience effect and the change in Styling.
View detail
My favorite Type.
It looks better than the windproof effect, but of course it is highly windproof. It fits inside the Screen completely if you lay it down a little. High speed is easy. It is also thin. [Color] Visibility is also good since Smoke was selected.
Anyway, I am satisfied with the purchase because I fell in love with the shape.
View detail
Effective
The OEMScreen was a little short in height, and there are not many options for K5 screens or other brand products nowadays, so I chose this one. I was scared to pull out the bush of the OEMScreen when replacing it because I was afraid I would break the cowl. The effect was perfect, the visibility was good, and I am glad I bought it. View detail
Genuine Puig Dark Smoke Screen
A few customers have had these brand of screens. Personally, I have never tried them but as it goes they do seem a robust screen. Plus, a customer specifically requested this dark smoke version. They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape the entire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a dark smoke screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
The Grom version is used for the KTM390DUKE.
[How is it used?
Since we often drive the 390DUKE on the highway, we decided to install Shield to withstand wind pressure.
Was the one you received as per Image?
The Shield is a very lightweight, lightweight, and lightweight product.:Pair (for Left and Right) Thanks to the shape of the shield, the front blinker is not covered by the shield, and it was installed without any discomfort as if it were a 390DUKE-specific shield.
Was the installation difficult?
The basic installation method is the same as that used for the Grom, and it is large and sturdy. However, since it needed to be installed closer to the rear of the vehicle, we used KITACO's Mirror adapter set 8mm Normal Thread Screw (part number MA-12) to shift the entire screen to the rear. Since this product does not come with a windscreen mole, I separately purchased MRA's Screen Mole Set (Part No. MRA-2) and installed it. However, since the length of this Windscreen Mole is 1 meter, it could not cover the entire circumference of the Shield, but since the lower part of the Shield has a tight bend, it would have been impossible to install the Windscreen Mole around the entire circumference of the Shield anyway.
How was your experience with it?
Even when cruising at 100 km/h on the highway, the Shield is not directly subjected to wind pressure, so it is extremely comfortable. Since the Shield does not cover the Front Blinker, the light from the Blinker does not reflect on the Shield. However, there is a white LED position light around the perimeter of the DUKE Headlight that is always on and emits light at an angle upward, so the light reflected off the bottom of the Shield and was a little glaring at night. I am thinking of painting the inside of the lower part of the Shield in matte black in the future.
[Included Parts:were they on?
A complete set of Bracket and Bolt required for installation is included.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Point or hang of installation:In case of diversion, ingenuity is required.
Availability and clarity of Instruction Manual:A carefully illustrated instruction manual is included.
View detail
I think it works.
Purchased for a Large Screen.
Highway not verified
I drove down the road at 60~70km and felt that the wind hitting my stomach was considerably reduced. I plan to test it by driving to see how effective it will be as it will get colder from now on.
Looks a lot different and satisfying.
View detail
More than the price
Purchased for SUPER CUB110 (JA59).
Machining accuracy is quite rough. (Sweat)
But I was able to install it without any problems,
ShieldBody was Beauty when the protective film on both sides was removed.
It is good to keep the wind out of the room.
I am Large satisfied with this price.
View detail
Simple and clean
Simple and clean design that is easy to install. Visor is slightly tinted and helps to reduce glare on the dashboard. The shape also helps to direct frontal wind upwards so it doesn't hit rider's torso heavily. View detail
so good
wesome. Delivery is also fast. Performance is also satisfactory. I want to drive a lot, but it’s very cold in South Korea. I think you will be able to feel solid performance if you ride it a lot next year. View detail
Genuine Givi Small Universal Screen fitted to XSR900
I was going to go for a different make but have read a lot of great reviews for this one. The Givi Small Universal Screen. A brand I have not had much dealings with but a few customers have had these brand of screens. They are reasonably priced and the fitment is perfect with what I have read. With a few other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually.Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course yo need, all the bolts and fixings are present and I used these to affix to the XSR900 I had sat in teh garage. It did take a little modding but eventually fitted. It really is a lovely retro looking screen which is what I was aiming for anyway. Not really much else to say about it until I actually take a ride out but the smoke colour does add a nice touch to the whole look of the bike now. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail
It will look better.
The OEMScreen's windproof performance was subtle, so it was replaced.
Among various external Screen products, we chose this one because we thought it had the best balance of length, color, and appearance.
It does not warp like OEMOption.
Windproofing is not dramatically improved, but it does look better.
[Color] Smoke was selected, but the entire image is now in the Blue×Black family, making it look tighter.
View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
Mounted on PS250
It is for an address but can be installed on other motorcycles without modification, which is a high point. The included bolt was stuck to the bottom of the Mirror Holder screw, so I used a SUSCap bolt with a 20mm bolt under the neck to hold it in place. Although the wind from the front doesn't hit it, the Attachment of the key started to spin around, as if there is a strange airflow. View detail
For those who want a more adventurous feel...
I was thinking that the OEM screen was not long enough in terms of appearance, but I found a screen with a good length, so I bought it.
ADV can be transformed into two patterns, one with the screen lying down and the other with the screen standing up.
The standing Style is slightly easier in the high speed range if you get down a little (slightly).
I like it a lot because it is not too small, not too large, and has a different look and feel compared to OEM.
View detail
This is the kind of Screen
I personally did not like the design of MT-07 after most of the screens were installed, probably due to the mounting position of the Light, but with NAKED, it is like a battle against wind speed at high speeds, so I had no choice.
Since we wanted to avoid a large, prominent Screen, we chose a Type with a transparent top.
Middle type in terms of size (Small Type?) Although it cannot be said to be strongly effective, it seems to have slightly reduced wind pressure hitting from the chest down at high speeds of 80 km or more, but a larger type would be better if the wind protection effect is to be enjoyed at the largest possible size.
As for the installation, I think it is easy and even girls who are not good with Machines can do it.
Since the meter is in the front of the car, there is space for a pair of shoes between the meter and the screen, which is convenient for placing gloves or other items.
You could say it's a waste of Space, but … sweat.
View detail
Fits: KAWASAKI NINJA 1000 SX, KAWASAKI NINJA1000, KAWASAKI Z1000SX
Might be good.
I am 185 tall, so I felt a little small in the standard Screen.
Even at high speeds with temperatures of 13 degrees Celsius, it seemed to avoid the wind well and was easy to drive.
View detail
Quality is good
It is a little expensive, but it is thick and solid and Quality is good. I have never seen anyone wearing it, so I chose it, and it looks pretty good. It seems to be an overseas manufacturer, but there are no scratches, etc., and it is good. The windproof effect is better than Y's Gear's OptionScreen, so I use this for summer. View detail
Fits: KAWASAKI NINJA400, KAWASAKI NINJA250R, KAWASAKI NINJA400, KAWASAKI NINJA250R
More windproof than OEMLong Screen!
It was windproof, though it was comparable to OEMLong.
I am 170 cm tall, and in a normal posture, the wind that used to hit me in the lower neck and chest area now flows toward my upper neck.
I also feel that there is a little less wind on my shoulders.
I think it would benefit a lot on highways because the airflow would be completely over the Helmet when it is in a low position.
However, there is some rattling if the product is installed as is, perhaps due to lack of precision. As other owners have said, the rattling was eliminated when a rubber plate was inserted.
View detail
Installation could not be done
The two front holes were misaligned with the Bolt position on the Body side and could not be installed.
I asked Manufacturer to check and they said there was nothing wrong with the product itself.
I don't know why, but I decided to return it because I can't put it on.
Please be careful if you are buying the same type of car.
It is a shame because I liked both the transparency and the shape.
View detail
Fits: HONDA SUPER CUB 110, HONDA SUPER CUB 110 60th Anniversary, HONDA SUPER CUB 110 STREET, HONDA SUPER CUB 50, HONDA SUPER CUB 50 60th Anniversary, HONDA SUPER CUB 50 STREET, HONDA SUPER CUB110
Meter visor I've always wanted.
Although it is not nearly as effective as a windshield, it is very effective in terms of design. Since it is a dedicated product, the fit is good, and I was able to install it even without a Large Kill. There is also a bar to attach a Smartphone Holder, so it can be used in a wide range of applications. View detail