Reviews
Don't expect too much.
The windproof rating of the Normal screen was quite high, and I installed it thinking that the High Screen would be perfect, but I was disappointed.
I was 175cm tall, and when I ran at high speeds with an off-helmet and held up my hand to check the wind flow, I found that it was indeed flowing in a way that slightly avoided my upper body. However, there was quite a bit of entraining wind, and when I raised the Helmet Shield, I could see the wind flowing in. If you also open the Intake on the chin, it becomes cool enough to feel the wind flowing in.
I gave it a low rating because it looks Wide&Long and I was expecting too much, but if you switch from a Motorcycle with no Screen or Short Screen and experience this High Screen, I think your rating will be the complete opposite.
Manufacturer claims "High Screen&Prime for superior wind protection;" however, we would expect a near windless protection effect. It would be better to add that it is designed to prevent unpleasant wind and receive moderate wind.
I would rather buy an OEMGuard and leave the Screen at NORMAL than go to the trouble of paying 30,000 yen for it. Or, you would be happier with an external High Screen.
View detail
It's cool and Dark smoke is tight.
No distortion, good texture, beautiful colors, and a good purchase. However, the thickness is thin, so I recommend to use something like sponge when installing it. View detail
OEMCowl not available
Can't use it in the last semester tep, maybe I can use racing cowl... View detail
The product is Well, and a good impression is made!
The product is designed to be used with the thickness of the Screen and [Color] I think that both the Smoke and the accuracy of the BKT installation are good.
[Color] We chose the darkest Smoke and the most expensive Screen, and we like them in terms of design.
The darker screen provides well forward visibility even when it is cloudy in the daytime, and I feel that the height of the screen is also necessary if you want windproof effect.
Screen strength also seems to be fine at CircuitLevel Speed.
The only reason I couldn't give it more than one star is that there were no instructions on how to install it and I couldn't figure out the proper way to install it.
I used 4 bolt nuts on the Headlight BKT and modified the included BKT a little to install it, but I feel that this method is better in terms of strength.
Overall, I believe we have completely fulfilled the need for increased windproofing while maintaining helicopter TESIStyle.
View detail
Satisfied with both appearance and effectiveness
By changing to a long screen, the amount of wind received by the body was eased, making high speed cruising easier.
I am satisfied with the appearance, which is better looking than the NORMAL.
I set it to Smoke Screen, but there is no inconvenience of blocking the view, etc.
View detail
Easy to install
The Instruction Manual is easy to understand and I was able to install it easily even though I am not familiar with it. It also looks good. View detail
It works pretty well
Existing screen at low speeds (about 30 km) I replaced it with a long schooner, and found that it was more than effective in reducing wind noise.
It might be a little hot when driving at high speeds in midsummer, right? By the way, the helmet is SHOEIJForce4.
View detail
The detail construction is not good enough.
The end of the visor is not bent enough so that it interferes with the cowl corner, and the hole is not cut enough so that the visor does not fit inside the meter visor and it floats! It is a bit of a problem.
The transparency of the Level is good, with little distortion even when the Level is face down, which is not bothersome.
For this Gold amount, I think the texture is well made.
View detail
Fits: SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX, SUZUKI SKYWAVE650 burgmanLX
Larger than OEMScreen
It is very cheap than buying from OEM, and the sides are sized up to the equivalent of a Knuckle guard.
It is larger than OEMScreen.
Unfortunately, the thickness of the product is thinner than the OEM, but the strength of the product is smaller than the OEM, so the product may flex at high speeds,
Wound is more likely to be attached compared to OEM due to the difference in material.
View detail
Windshield
My windshield arrived this week ahead of schedule which was very exiting. The quality of this product is supurb. It fitted without complications and has now given my Katana a stunning appearance. The shape is so much closer to the original than many others on the market and of course the wind protection it offers is far superior to the OEM screen. I cannot sing the praised of Over Racing enough as quality of everything the make is market leading. Thank you Over Racing and thank you Webike. View detail
Without Honda Front carrier...,
Cannot be installed without HondaFront carrier.
However, I think the Design is very good.
I don't feel the windproof effect is very effective, I think Windshield, another company, would be more effective.
View detail
It was a good decision to replace it!
I replaced the OEMScreen with CORSA's Clear. I didn't notice any difference in the effect, but it looks very Parenthesis-like and it was the right decision to replace it. I especially like the way it looks from the back. [Color] I would like to purchase Smoke as well, and I also appreciated that the delivery date was 4-5 months earlier than usual. View detail
ct125 hunter cub wind screen
very good!About quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
Fits: HONDA CB125R, HONDA CB125R, HONDA CB250R, HONDA CB150R, HONDA CB300R, HONDA CB150R, HONDA CB300R
Meter visor
[How is it used?
Purchased in hopes of changing the look and a little wind protection.
Was the one you received as per Image?
I wanted something Smallish and it was as per Image.
Was the installation difficult?
It was easy to install with no problems after reading the instruction manual.
How was your experience with it?
The look is exactly how I expected it to look, and it's to my liking.
The windproof effect is not that great since it is a Short Type.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
There is none
View detail
Not destroying the gsx-8s design.
The FrontDesign of gsx-8s is peculiar, but this Screen does not destroy the original design and provides a windproof effect there.
[Color] The color of Smoke is considerably lighter than the Image in the product photo and the vision is clear.
Installation was easy using the OEM Headlight unit mounting screws.
The price was Reasonable and Large change was a good purchase.
View detail
Fits: HUSQVARNA 701ENDURO LR, HUSQVARNA 701ENDURO, HUSQVARNA 701SUPERMOTO
PetitAdventure
I installed it on a 2023 701 Enduro.
In this year, the BlinkerIndicator will be hidden in the shadow of the Bracket, so it will be harder to notice if the Blinker is forgotten to be turned off.
The rest of the hose is a little tight against the clutch hose, so we added a wire cover to the part where the hose hits the clutch hose.
Installation itself is easy.
It is also useful when installing Navigation, Smartphone, and Camera for Dora Recorder.
I prefer to install the RALLY50Tower, but this is easy to install and has a good windproof effect, so even if you are not ready to install the RALLY50Tower, you can easily install the PetitAdventure. (or Tourer) You can feel the mood.
View detail
Comfortable Touring
Good design and functionality.
It also prevents Meter burn.
View detail
Yoshimura wind armor
Item landed and we'll received.awsome packing in full bubble wrap.very satisfied.my second purchase.more to come.highly recommended.thank you webike.AWSOME!! View detail
I appreciate the size and the Brown.
Universal Product, so it has a high degree of freedom of installation. It has a good large size and brown color. [Color] The Smoke level is also exquisite, providing protection from the driving wind without interfering with visibility.
The product was exactly what I expected
View detail
Genuine Puig Touring Screen Clear for XT1200Z SUPER TENERE 2016
They are reasonably priced and the fitment is perfect with what I have read from reviews online for this screen to this model bike. Other items in my basket and this screen meant that the shipping was really good value because if you have a few smaller parts this cuts down on shipping individually. Some of the other parts were always going to be an issue in case they scratched the screen. Webike think of all this and pack your items accordingly. The screen was packed in a loveley thick bubble wrap and taped closed. The rest of the parts in my order were all padded and therefore, no damage could occur during transit. Webike even tape theentire box closed. EMS fast service is what I chose, the cost was so good and all my items were delviered in 5 days.The screen arrived with me in perfect condition and I am not surprised by the amount of bubble wrap that was surrounding it. The screen has a bit of flex which of course you need. This also helps when you have an aftermarket race front fairing and they very rarely are the exact same shape as the original so some movement is needed in a screen anyway. All the fixing holes are perfectly made, line up just fine. Not really much else to say about it, it's a clear screen. There are no sharp edges and all appears to be without any distortion to it either, crystal clear if you like. All together, I am very pleased with how it looks and how it all went together. Not a tough job for anyone. So, thank you Webike for the great services. View detail