Reviews
Fits: YAMAHA Remote controller jog, YAMAHA TOWN MATE, YAMAHA Box, YAMAHA VINO(2Cycle), YAMAHA JOG APRIO, YAMAHA JOG POCHE, YAMAHA YV50 Z II, YAMAHA Axis Treat, YAMAHA GRAND AXIS, YAMAHA CYGNUS X, HONDA DIO, SUZUKI VECSTAR150, SUZUKI VERDE, SUZUKI LETS4, SUZUKI LETS5, HONDA LEAD 100, HONDA LITTLE CUB, HONDA LIVE DIO, HONDA FREEWAY, HONDA Byte
Easy to replace. The quality is appropriate for the price. I think it will last for a long time.
I raped the Handlebar Grip of the LETS4 replacement.
Perhaps the grip texture is different from the NORMAL (OEM Product), but this product has a mussed texture. In that sense, it does not slip.
*Working time is 20 to 30 minutes
After chopping off the old Grip with Scissors, I cleaned the old Bond by scrubbing and wiping, sprayed Parts cleaner on the new Grip and tube, and inserted it all at once.
*You can start over.
The Axel side inevitably feels uneven when you hold it, but since it is not an OEM product, this is to be expected.
The rest are fine, a little on the Large size and sticking out.
View detail
Thin Type
It is a thin type, so it is easy to grip for those with small hands. View detail
Easy to grip and non-slip
[How is it used?
I was considering replacing the OEM grips on my SEROW225 because they are worn out.
Initially I was hoping to use OEMGrip again,
A junior colleague was using DRC, so I copied him and decided to use DRC.
Was the one you received as per Image?
The juniors were using it and it didn't look any different.
And since DRC is cheaper than OEMGrip.
I tried this way.
How was your experience with it?
The DRC Grip is easy to grip and non-slip, which improves operability. Also, there is vibration, which is characteristic of off-road vehicles,
The Grip is soft, so it absorbs vibration and does not tire the hand.
One drawback is that the grips are soft, so the grips move even when stopped with a bond.
[Points to note]
Grip replacement is not a particularly difficult process, but 1.Use parts cleaner. 。 2.Remove at once with Air. The
I think it is common.
How did it compare to other products?
I dared to use OEMGrip, but I thought DRC was also cosmetically pleasing and easy to use.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
Fine Slotted screwdriver, Parts cleaner, Air equipment, etc.
View detail
Decrease measures?
The BMW Motorcycle grips seem to wear off a little faster, so I installed them as a countermeasure.
I am satisfied.
View detail
I choose Racing grip.
For many years, only the open end was available, but in recent years, only the short type is now available with a closed end to match the Scooter and other models.
I feel most comfortable with this racing grip.
In Circuit driving, it is very easy to operate and use from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
I think it is not tiring and universal for both city driving and touring.
I guess the drawback is that the Design is a bit old-fashioned.
View detail
ErgoWorks (KIJIMA) Grip Shrink Tube
I was told that S1000RR's grip is with heater, so when it wears out, the whole part needs to be replaced (50,000 yen including labor! I was told that I would need to replace the whole part when it wears out (50,000 yen including labor!), so I installed it. View detail
Fits: YAMAHA jog, YAMAHA vino, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA LIVE DIO
Mounted on VINOsa-26j
I installed it on my VINOsa-26j, but I thought it would be easy to get dirty, so I went with Black.
I thought it would be easier to clean with Brown if it were this hard.
View detail
Soft and tireless
The design looks like an OEM grip and does not have a custom feel, but that is good!
The OEMGrip on the CT125 is hard and poorly shaped, so thin Gloves will hurt your palms.
The Grip is very soft and absorbs microvibrations, which reduces the burden of long-distance touring.
View detail
Fits: HONDA XL250, HONDA XL230, HONDA XL200, HONDA TLM220, HONDA TLM200, HONDA SL230, HONDA MTX250, HONDA ELSINORE 250, HONDA FTR250, HONDA CTX200, HONDA CRM250 AR, HONDA CRM250 R, HONDA CRF250L, HONDA CL72, HONDA CL175, HONDA AX-1, Others , YAMAHA DT200 WR, YAMAHA DT200 R, YAMAHA DT-1
Stylish & practical!
[How is it used?
Used on Yamaha's WR155R.
The handlebar to be installed is ZETA's CX Handlebar MX-412.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
Same as normal Grip exchange.
How was your experience with it?
I was looking for a replacement for my OEM Grip that was losing weight and chose one that looked good and functional.
The OffRod Grip is a great bite and the stylish DominoLogo is satisfying.
Wiring ditches are also provided and considered.
If you are going to replace it, I recommend this Grip because the price is not that different from others!
It is nice to be able to choose between Open End and Closed End.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
None
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
I've always loved it.
It is thick and easy to grip, and I have been using it for a long time. View detail
Fits: HONDA CB350, HONDA CB250RS, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX400, SUZUKI GSX250S KATANA, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB400, HONDA GB500
Firm and direct feel
I bought these to replace softer "comfort" grips the previous owner installed. Immediately, I noticed an improvement in fine throttle control, and feel more certain of my hand positioning. The material feels firm and provides high grip. I imagine it would perform well in wet weather, too. I would recommend these grips to those who prefer a "direct" feel. View detail
To match the Right
The standard installation grips for CB/CBR series are highly evaluated for their good grip and ease of use.
The effect is felt most on the Throttle side, but the Quantity:Pair (for Left and Right) Since they are aligned, the Left will inevitably be this Grip as well.
The exquisite softness of the rubber may be the reason for the good grip, but the amount of grip loss is quite small, and there is little change in the feeling of grip until the end, when it has worn off. This is probably due to the fact that the grip is earned by the quality of the rubber, rather than relying on the shape of the surface, such as the file grain.
Other brand products with good bite, such as Pro grip, have good vibration absorption and other performance, but many of them do not have good durability. "Have." I recommend this one followed by this one, which is still being used by some people on YamahaRider as well as Rossi. I think it is because it is easy to use for many people.
View detail
Grip is good and easy to use.
Standard installation Grip for CB/CBR series.
I was using too much grip strength without realizing it because I had a light grip with winter gloves that were not easy to handle and kept slipping back when I opened the throttle. I am now using this for all my Motorcycles.
The exquisite softness of the rubber may be the reason for the good grip, but the amount of grip loss is quite small, and there is little change in the feeling of grip until the end, when it has worn off. This is probably due to the fact that the grip is earned by the quality of the rubber, rather than relying on the shape of the surface, such as the file grain.
Other brand products with good bite, such as Pro grip, have good vibration absorption and other performance, but many of them do not have good durability. "Have." We recommend this one, which is followed by
View detail
RossiGrip
It looks and feels great and was easy to install. View detail
RossiGrip
It looks and feels good to wear!
Installation took about 30 minutes and was no problem.
View detail
This is the only one in the AfterMarket.
DucatiSCRAMBLER's Throttle tube has a taper on the holder side, but most grips have a flat shape on the holder side, so it does not fit effectively, leaving a gap that does not look good.
OEM grips are too expensive, and this Pro grip717 is the only one I know of in the AfterMarket that has a taper process on the Holder side and hooks up nicely, so I can't help but choose this one.
Design-wise, I would like to add something a little more Classical, but I have no choice, so I gave it 4 stars.
View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
It fit better than I thought it would.
The grip felt more comfortable than I had imagined.
Installation went more easily than I expected. It went on more easily than I expected.
If I`m not using Air compressor or Cleaner system, should I have used Grip military hands?
In terms of time, it takes about 10 minutes for both.
However, because he worked with his bare hands, the skin on his hands was torn in two places.
Also, the Accelerator Wire broke when I plugged in the Axel side ….
It may have deteriorated considerably, so it was time to replace it and reopen it.
Recommendation:Stop forcibly working on the Accelerator Wire and remove it.
In case you are wondering, we used a special adhesive.
View detail
ปลอกแฮนด์ daytona ทรงสวยใส่แล้วกระชับมือดี View detail
Fits: HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON V-RODFamily, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily
buy grip red
Good grip and comfortable to use.
Best of all, the fit is great.
It fits perfectly on the handle and is used well.
Grips must be purchased to fit the handle well.
It would be perfect if you buy it by referring to the purchased photo.
I'm driving an 883r and it fits perfectly here. -------------------------------------------------- -------- Grip feel good and good. Above all, the fit is good. I use it well for the handle. The grip must be purchased well with the handle. It would be nice to buy the purchased picture and buy it. I'm driving the 883R, but it's perfect here. Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON V-RODFamily
Grip replacement
I like it because it is very easy to grip. View detail