Reviews
Fits: HONDA Super Cub 50, HONDA Super Cub 90, HONDA Super Cub 50, HONDA Super Cub 90
Comfortable.
The grips that had been on the car since it was brand new in 2007 were replaced this time because they were chica and the grooves were no longer clean.
The Throttle side was replaced without any problem after cleaning the resin, but the Left Side was rusted near the root because of the steel, so it took more time to remove the rust. The product is very comfortable to hold and the design of the grips is not too assertive, which I like.
View detail
Grip wear prevention.
I purchased the Grip heater because it is more worn than I expected.
The Grip heater used is PLOT's EFFEXGrip heater.
There is also a product for EFFEX in Lineup, but I preferred the look of this one, so I used this product this time.
I was worried about whether it would stick properly because it is quite uneven, but it worked perfectly!
After covering it, the whole thing was then burned with a heat gun.
It may be a little easy to Slip because of its spongy feel.
It is simply a Large Heat Shrink Tube.
I didn't know such a product existed, and if I had known, I would have installed it before it wore out.
View detail
It was common.
It was common. View detail
It's a pudding.
I bought this in the hopes of reducing the numbness in my hands caused by a little Handlebar vibration.
At first I was puzzled by the unique grip, but I soon got used to it.
Naturally, there was almost no improvement with just a grip change, but I was satisfied with the pliable feel of the grip, which is gentle on the hand.
Some people say it reduces vibration, so it may be compatible with Motorcycle.
It is standard practice to blow air in the Compressor to remove the Grip used for replacement.
If there is no Compressor, KURE 5-56 is also a Recommendation.
Inserting the thin nozzle provided and adding lubricant will release most of the grip bonds, allowing the grips to come off.
A new Grip is also inserted with a 5-56 and left overnight, and the unraveled Grip bond will harden again, so a Grip bond is not necessary.
The applied 5-56 will also be absorbed and will not slip if it is a normal Grip.
However. I have never been concerned about it, but there may be a negative impact on Grip.
And recently Motorcycle is Reducing in cost (Corporate efforts?) Grip bond is applied only a little bit for the "Grip bond", so you might not want to be stingy with it;
Incidentally, this time we used a raw Rubber type, so we used Compressor and Grip bond for the replacement.
It is good to try different Grips because they are inexpensive and change the look and feel of the grip.
This time I chose Raw Rubber in the hope that it would reduce vibration, but since there was not much change, I will use the same type of Black when it gets old.
View detail
Easy to use for the low price!
[How is it used?
Aluminum billet grips have severe static electricity in winter, and we ended up escaping to the Sponge type.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
If it is sticking, it will be Large strange, but it can be easily replaced by spraying it with CRC or the like.
How was your experience with it?
It is good because it is easy to grip and has a quick, luxurious feel.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
▼The challenge is how well Sponge can withstand degradation over time.
View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
It was the lowest price at the time of purchase.
I bought this grips because it is the same as SolePattern by vans, so I expected the gripping power to be better. The grip may feel thicker than other grips, but the grips themselves are very flexible, so I think they will be easy to install. I am not sure about the durability yet, but I like it very much because it does not slip. View detail
I installed it on my gn125h.
The grip is soft and comfortable.
I cut the OEMGrip and screwed this one in.
ExactFit.
View detail
Best!
If I had purchased this from the beginning, I would be yoCutter, and now I am Large happy with it! View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
really best product
It's a really good product. It's a small change, but I really like it. Existing drawings were easily removed with air. It was easily replaced without a separate tool. However, it is white, so it is easy to see how dirty it is, but it is so pretty that it is forgiven. ------------------------------------------------------------ -------- It's a really good product. It's a small change, but it really changed. The existing paintings are easily removed by air. I easily replaced it without a separate tool, but it's white, so it's dirty to see it, but it's pretty. Powered by Google Translator View detail
Comfortable grip and excellent cosmetics!
Grip replaced on CT110 HUNTER CUB.
At 110mm, it appears to be the same length as the OEM.
When I put it on, it was a little short.
The grip is very firm and absorbs the grip, and is a good change from the OEM off-road style grip.
Touring applications will be improved.
View detail
KIJIMA Doctor Grips for Buell XB12Ss
About quality and texture - Top quality. Nice and soft but durable material used in these grips. About the feeling of use - Very happy with the feeling of comfort on the long rides that in the past with the OEM grips would lead to discomfort. Products to buy together - While I was adding these grips I decided to tidy up the handlebar setup with some barend mirrors. Difficulty of installation - Average difficultly for me as a whole for the install since the OEM grips were so hard to remove due to the contact cerment used but once that was taken care of the the actual fitment of these new grips was a breeze. Cost performance and comparison with other products - While searching I found the whole range of grips from Kijima very affordable and the Doctor grips are just great value for such a top quality grip. Will be hard to find a better one for the price. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - The Doctor grips are available in three colours and two sizes so be sure to measure prior to ordering for a successful install when they arrive. View detail
COSPA is good.
Replaced Grip on CT110 HUNTER CUB.
It is not too hard, not too soft, and has a moderate grip.
The price is low, but the quality is absolutely fine.
Recommended as a Standard Grip.
View detail
Used to prevent slipping
My HondaOEM Sports GripHeater started to slip after about a year of being installed.
This product is attached from above.
It was very effective in terms of preventing slipping, and I didn't have to grip the Grip as hard.
It made the ride very easy.
Heat Shrink Tube in the same manner as the Heat Shrink Tube, aligning and warming it with a Dryer (preferably a Heat gun) will cause it to shrink.
It is a small point, but since it is attached to the original grips, the grips are larger in diameter, so it is necessary to use a larger grips.
The feel of the grip changes considerably.
The Sports GripHeater is sold on the slenderness of its grips.
When I rolled this one up, it was about as thick as a regular Grip heater.
The non-slip effect remains the same even after a year, and if you don't like it, you can cut it off and remove it immediately.
You can also try it easily.
(If you want to increase the non-slip effect/grip diameter (but don't want to change the grips for some reason), you can use the
Very effective product.
View detail
Cosmo
With a heat gun, it takes less than 5 minutes to install, and you only need a heat gun for installation, but the only thing left is durability. View detail
Fits: HONDA CB1100, HONDA CB250R, HONDA CB300F, HONDA CB400SB, HONDA CB400SF, HONDA CB400X, HONDA CB500X, HONDA CB650R, HONDA CBR400R, HONDA CBR400R, HONDA CBR500R, HONDA CBR600RR, HONDA CBR650R, HONDA CBR650RA, HONDA FTR223, HONDA FTR223, HONDA GROM, HONDA GROM, HONDA LEAD125, HONDA NC750X
A must-see for all vans fans!
I bought it because I fell in love with the design.
The texture of the Rubber is good, and the grip is thick and comfortable.
When fitting the handlebar, it is tight, so you may want to use parts cleaner or something similar to make it easier to slide on.
I put in my own G17Bond.
It would be good for street custom, big scooter, etc.
Not suitable for Off-road or Motocross.
I switched to AMAType L Throttle with it and it looks great.
View detail
No complaints about price or function.
This is a grip that looks like something you've seen on a pad, but it's reasonable, and the feel is moderately moist and easy to grip.
As a motorcycle for circuit use, I don't want to use my grip too much, so this grip is very good.
View detail
Retro look
If you have small hands, you may find it difficult to grip the clutch and brake lever because of the thickness.
I have large hands and it's just easier to grip.
It is long and hard, not PVC, Material.:I like it because it is Rubber and it is moderately soft.
It's just that Material:(I used a Nipper to cut the BALI part.) Because it's made of rubber, the BALI and other parts of the molding are still intact, so the finishing of the details is not as good as it could be. (I used Nipper to cut the BALI part.)
Also, the color is not pure black, but rather a slightly faded black.
View detail
Spacer for Grip heater
Purchased as a spacer for Grip heater installation View detail
It was a normal Grip.
It's nice and soft, but the Taper section is crazy thin. View detail
It's worth the price (if you want to make the Grip thicker).
I put it on my NMAX.
The grip has become a little thicker and easier to operate.
The Material is tough, so it seems durable, but it's not the most comfortable grip.
View detail