Reviews
Fits: HONDA APE 100 TypeD, HONDA MONKEY, HONDA NSF100, HONDA NSR80, HONDA XR100MOTARD, HONDA NSR50
brembo
They are installed together for brembo installation.
Is it because the processing is different from others? The price seems a little high.
If you don't care about Design, anything that fits the Pitch seems to be fine.
View detail
feel well
The position is not too tight and it looks good. View detail
Expand Manual!
If you are not familiar with the installation, you will have a hard time.
There are only three installation illustrations and only textual explanations.
It would be great if you could include information on Unnecessary Parts and Settings!
View detail
exchange
It is sold at for Replacement, which is helpful.
Quantity:It is a Set and the price is reasonable.
View detail
Texture is GOOD
It is used with z1000.
I think it looks beautiful.
If you want to make the position more upward.
I think it's a recommendation.
View detail
99~07 HAYABUSA CALIPERS BREMBO CHANGE SUPORT (AGRAS)
neat mounting High Quality Best choice for upgrading Hayabusa brake performance Applicable only to 100MM European Brembo calipers View detail
A few for RaceRear Sets
It seems that there are only two other companies that offer Level Rear Sets that can be used for the Z125 Race.
Of these, only AGRAS's Rear Sets can be purchased online.
I really like it because I can earn a lot of bank angle.
The thickness of the plate and each part is quite thick, so it is hard to break when it falls over, and I thought it was well thought out.
Footpegs are also non-slip and can be operated properly.
If I had to guess, I would say that it would be nice to be able to back up a little more.
View detail
Easy to install!
Easy to install, takes less than 5 minutes.
It also has a good weight and texture.
Fortunately, I haven't fallen over, so I don't know how effective it is (laughs).
View detail
I put it on my New Model GSX1300R HAYABUSA.
I used to have an Earls Gear cylinder cover, but I bought this one when I bought the AGRAS Handlebar Set. The color and design match the Handlebar Set and I am satisfied. View detail
I put it on my New Model GSX1300R HAYABUSA.
I bought it because the OEM Handlebar was too tight for full lock. The width, height, and length of the handlebar have increased by about 1cm, and the form has been improved by the increase in height and length. The full lock roll is easier and the handling is lighter.
I think this is the best product for those who don't want to change from OEM to Large, but want a little more.
View detail
Maximum satisfaction
The quality of the workmanship, the sense of ownership, the satisfaction, makes me smile every time I put the key in the keyhole. View detail
This is a self-satisfying part.
This is a completely self-satisfying part.
I used it on the master cylinder of the rear brake of the GSX-R1000R, but it is more than half hidden when the side cover is installed.
View detail
Fits: HONDA CBR1000RR, SUZUKI GSX-R1000, YAMAHA YZF-R6, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR600RR, KAWASAKI Z900RS, KAWASAKI ZX-10R, KAWASAKI ZX-6R, KAWASAKI NINJA1000 (Z1000SX), SUZUKI GSX-R1000, SUZUKI GSX-R600, SUZUKI GSX-R750, YAMAHA MT-01, YAMAHA YZF-R1, YAMAHA YZF-R6, SUZUKI GSX-R125, SUZUKI GSX-S125
It gave a sense of luxury.
This is a completely self-satisfyingParts!
But it definitely gave me a high-end look, so I'm very happy!
A little cheaper would be appreciated w
View detail
To prevent standing sickness
I installed it on KATANA.
I can't protect the Silencer completely, but I think this length is the best for its appearance.
View detail
Quality is high
I bought the Silver Aluminum one, which is a bit heavier than the DURACON one, but has a nice texture to it.
I think it's a good idea to have it equipped, as it's the last thing you need before you fall.
View detail
Fits: HONDA CBR1000RR, HONDA CBR1000RR, KAWASAKI Ninja250, KAWASAKI Z1000 (water-cooled), KAWASAKI NINJA1000 (Z1000SX), SUZUKI KATANA, KAWASAKI ZX-25R, HONDA CBR1000RR, HONDA CBR600RR, HONDA CBR954RRFire blade, KAWASAKI W800, KAWASAKI ZX-10R, SUZUKI B-KING, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSX-R1000, SUZUKI GSX-R125, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-S1000
I like it a lot.
[How is it used?
If the hole of Stand Hook is left open, sand or foreign substance may enter the screw mountain and it may be easy to rust. I use this Slider which can also be used for Stand Hook as a thing to fill the hole because it will damage the screw mountain afterwards.
Installed and used for about a year.
Was the one you received as per Image?
As per Image.
Was the installation difficult?
Installation itself is easy. However, when installed as is, it is very close to the Swing Arm and seems to use more care than necessary when hooking the V-shaped Hook on the Maintenance Stand. A little [Color] I adjusted my 4mm aluminum spacer in between to take out the ClearAlans.
How was your experience with it?
Good for Stand Hook with V-shaped receiver.
It can be used with Stand Hook.
[Included Parts:were they on?
Instruction Manual only.
[Was there anything that disappointed you?
I would appreciate it if the included Bolt was a little longer.
View detail
AGRAS Racing slider installation
The Right Side can be easily installed without removing the Cowl.
As for the Left Side part, it is necessary to remove the Cowl and install it.
It is necessary to cut the corner of the Cowl slightly because the Cowl cannot be installed because it slightly touches the Gold part of the Slider.
(I cut the black part, but it's not so obvious that it's hard to notice.
Therefore, it will take some time and effort to install the Left Side part.
Depending on how and under what circumstances the fall occurred, it may be effective in lessening the impact.
There are some things that I think are a little expensive for a product that doesn't usually work, but when it does, including standing moss outside of Circuit, I'm glad I have it on.
View detail
The most SMART Design
I used KIJIMA and Babyface, but I bought this one because the design is the most SMART.
The only thing I don't like about it is that the Lockling turns sideways when you lock the Helmet, but it's not too noticeable so I like it.
View detail
Increased sense of security
The installation manual is not attached, but it is easy to replace the footpeg if you remove the split pin. However, when you remove the footpeg, be careful not to lose the iron ball, and take it off slowly (the iron ball will be pushed out by the spring). The rubber sheet is attached to the notch on the bottom of Slider. The effect is unknown (I don't want to try). The size is smaller than I expected, so it is not so noticeable and I am satisfied with the sense of security UP. View detail
Good design and good protection.
It is installed in 2020 YZF-R6. I couldn't find a suitable slider, but I saw the AGRAS product and I'm satisfied with it after purchasing it. View detail