Reviews
In use on KLX230
KLX230 (SE) I bought it in Design, although it is being used for
The functionality of the car is honestly very dark, and I'm not sure if it can be used on public roads, since the street lights are brighter and there is no cutline. ()
As for the feel of the product, it's just cool w
There are three Wiring itself, Black Wiring is Earth?
If you match with the general Wiring color, the high and low will be reversed, so it is better to confirm the intention of the bulb you want to light before assembling in advance.
I lowerQuantity at the time of low:2pc. The Set is lit, the high switch is On, and the top bulb is also lit.
The body is assembled with elastic band on the lower side only, but it is too long and loose for the upright suspension. The inner tube of KLX230 is m37, so I think it is the right size for the inverted suspension. The upper part of the bracket is made by purchasing a bracket at Home center and drilling a hole in the plastic part where the Elastic band is attached and screwing it in place. 。
There is also an interference point where the brake hose hits the side of the hose, so I used a design knife and a nipper to cut the hose diagonally upward to alleviate the interference.
View detail
Purchased because OEM Headlight was broken.
I used it on a 2017 TE250 from HUSQVARNA that I always use for forest roadTouring and OffRoad courses.
Purchased as a replacement after OEM Headlight was broken due to repeated falls.
The design was cool and I immediately decided to buy it.
Installation is very easy and can be done with Included Parts:.
Headlight is not that bright with H4.
Also, there was a screw for adjusting the optical axis.
View detail
สวยมากครับ สินค้าดีราคาดีมาก จัดส่งเร็วใช้ได้เลย ไว้คราวหน้าซื้ออีกครับ View detail
สวยครับมาก verry good ส่งรวดเร็วมาก สีตรงกับรถ View detail
Poly sports SM Fender UFX Front Fender
I was looking for a short fender to MOTARD my crf250ls md47 and found this product!
The fitted look was perfect!
I'm glad I bought it!
View detail
POLISPORT SM Fender UFX Front Fender
I was looking for a short fender for my CRF250ls to be MOTARDed and found it.
When we installed it, it looked perfect.
With other Fenders, there was a gap between the headlight cowl and the headlight cowl when installed, which was subtle, but this one was shaped to fill the gap nicely, just like the Image.
View detail
It is a Universal Product, but you choose the mounting location.
[How is it used?
I bought this to install on my Yamaha WR155R.
Was the one you received as per Image?
The product was exactly as shown in the picture.
Was the installation difficult?
As a result, it did not come on the WR155R as it was.
So it is not installed now.
I had to install the Adapter on the Hand Guard because there was no good part around the Handlebar and I could not find a good place to install it.
Quantity even if forcibly attached.:Pair (for Left and Right) I gave up on Balance because it was not beautiful in
I tried turning the Adapter upside down and shifting the Lever and Switch positions, but it didn't fit.
Maybe it would be good to wear it on Racer, etc.
We are keeping it in storage, believing that it can one day be used for other types of vehicles.
How was your experience with it?
Unfortunately, it is not working.
[Included Parts:were they on?
Instruction Manual
[Was there anything that disappointed you?
Since it is a Universal Product, I think it is generally acceptable and can be installed, but since it did not attach well to the WR155R, I will consider installing it with something else.
View detail
Easy to install_Cosy, but be prepared for cracks.
Material:I thought about Aluminum, but the ease of installation (I can keep using the same mount) made me think about Aluminum.
Material of this Type:I continue to use PlasticHand guard.
However, it is plastic and will crack.
Right Side is not cracked and still has a 10 year old polisport product on it.
I had been using Left Only low-priced products, but they cracked twice in a row this past year.
I have returned to polisport this time.
I look forward to seeing how much use it will be in the future.
It comes with installation documents. If you have installed it before, you should have no problem.
Even if it is slightly off, it is plastic, so it will fit if you push it hard enough.
I wish they would sell One Side!
View detail
Fits: YAMAHA YZ450FX, YAMAHA YZ450F, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ250X
Inexpensive to replace consumables.
I thought I heard a rattle coming from the undercarriage, but the Slider was worn and scraped.
I'm a Motocrosser, so the Chain slider is a regular replacement.
Cheap andQuantity:It is a very good value for the set.
When I put on a new one and turned the Tire in the sky, I got a Chain clip.
Maybe I'll get used to it soon.
View detail
Fits: KTM SX, KTM SXF, KTM XC, KTM XC-F
Cost-effective Disk guard
It is a Disk guard that also covers the Bottom and Brake area.
The front wheel can be removed with the Guard in place, so it didn't get in the way too much when changing tires.
It looks tough, but the weight is light and the Guard has a wide range, so I think it is cosmetically pleasing.
The guard itself is scratched, but the disc and bottom are not damaged, and the brake is not broken.
View detail
Fits: YAMAHA YZ450F, YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250F, YAMAHA YZ250FX, YAMAHA YZ450FX
Fit with the car body was not good.
21' I bought one for YZ250F, and I like the Seat itself, but the fit with the body is not good.
Seat bolt is hard to pass.
Compared to Seat in NORMAL, it is harder to align the Side cover, Frame, and Seat holes.
The height does not match the Tank Cover.
The Seat of YZ 250/450F is divided into two parts with Tank Cover, but the height differed from Tank Cover by more than 1cm. (Tank Cover part is not included in the product.)
*No discomfort during the ride.
Seat form is much firmer than NORMAL, so it is not suitable for touring. The footing is also a little worse.
I would give it 4 stars if it was used on a Motocross car other than the YZ-F.
View detail
2022 yz250x
All-around protection. Good quality yz250x View detail
Rear Fender requires Cut
Rear Fender needs longer Cut than OEM.
Cut with Nipperetc., prepare the cut section with Belt Thunderetc., and melt the white discoloration with Heat Gun or Burner to restore the color.
The parts to be cut are made in an easy-to-understand manner, so there is no problem, but some people may find it quite time-consuming.
View detail
Fits: KTM 350XC-F, KTM 350EXC-F, KTM 125EXC, KTM 500EXC-F, KTM 450XC-F, KTM 450EXC-F, KTM 300EXC, KTM 250XC, KTM 250XC-F, KTM 250SX, KTM 250EXC-F, KTM 250EXC, KTM 200EXC, KTM 150SX
Installation on other vehicles
I bought this product to install a KTM Fender on my WR250X because I don't want to have a Custom with others.
Light cowl is also KTM, by the way.
It requires a lot of work to install, but it has improved Parenthesis considerably.
In terms of the balance of the car body, the Fender is longer, so it is shortened a little.
View detail
I didn't get to 00.
[How is it used?
It is not compatible, but I bought it to install on my 2000 RM250.
I was expecting to be able to install it on my acquaintance's 2003 RM250, but the result was that I could not install it.
The Axle Block area of the Swing Arm was too large and I could not get into it.
Was the one you received as per Image?
It was higher quality than I expected. It has some thickness and seems to protect the Swing Arm.
Was the installation difficult?
I was unable to install it, but it comes with Tie Wrap, which can be installed by simply tightening it.
There is no need to remove the Wheel either.
How was your experience with it?
I couldn't use it. It's a pity because the product was good.
[Included Parts:were they on?
It came with a Tie Wrap and some sort of cushioning material to attach to the Swing Arm.
There was no Sticker, which is a certain Off product. Surprising.
[Was there anything that disappointed you?
Not particularly
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
It looks like it will be attached to RM after '03, so you can divert at your own risk.
View detail
Fits: KTM 150EXC, KTM 250EXC, KTM 300EXC, KTM 250EXC-F, KTM 350EXC-F, KTM 450EXC-F, KTM 500EXC-F
Full Cowl
The product was more precise than expected, but I gave it 4 stars because there were some BALI and small wounds, and air could easily enter the product when the decal was attached. Other than that, I thought the level of precision of installation was high for an Other Brand Product. The price is quite cheap, and I think this gold price is the lowest price for a full kit. View detail
Fits: YAMAHA YZ250X, YAMAHA WR450F, YAMAHA YZ125, YAMAHA YZ125X, YAMAHA YZ250, YAMAHA YZ250F, YAMAHA YZ450FX, YAMAHA YZ250FX, YAMAHA YZ450F
Mounted on XTZ125
[How is it used?
Diversion to XTZ125
Was the one you received as per Image?
The quality and design were both GOOD!
Was the installation difficult?
Small processing such as drilling is required.
The installation work has been uploaded to my maintenance diary. I hope it will be helpful.
https://imp.webike.net/diary/233508/
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
good quality
good quality。i love it View detail
That's good. That's good!
Fitted with no problem!
I think it's usually good.
View detail
Fits: KTM 150XC, KTM 125EXC, KTM 105SX, HUSQVARNA TE250, HUSQVARNA TE125, HUSQVARNA TC250, HUSQVARNA TC125, HUSQVARNA FE450, HUSQVARNA FE350, HUSQVARNA FC450, HUSQVARNA FE250, HUSQVARNA FC350, HUSQVARNA FC250, KTM 250EXC, KTM 250EXC-F, KTM 500EXC, KTM SX-F450, KTM SX-F250, KTM SX125, KTM SX150
It could be installed on GASGAS.
I was able to install it on my EC250 (2021) without any problems. View detail