Reviews
![Handguard Evolution Integral [Evolution Integral] With Mounting Kit](https://img.webike-cdn.net/catalogue/images/12302/8305100026_TS.jpg)
Fits: Others
Attached to KDX 125 S R
This price is amazing quality.
I got mocked at the forest road immediately, but it was not damaged by a single shot and it protected the Clutch lever securely.
Since there is also a forward projected area, if you adjust it to the proper position, the windbreak effect is also high, which is also ideal for Touring use.
However, when installing to KDX 125, Right interferes with Brake master cylinder and Left interferes with Clutch Wire, so processing and ingenuity are necessary at the time of installation.
I firmly tighten the Screw of the Handlebar End and fix it, and the rest is Tie Wrap.
View detail
Fits: Others
I am happy that the cheaper of famous Manufacturer.
I bought it because I broke the hand guard when I fell down the other day.
Unlike ZETA, ACERBIS and other iron cores, all are made of Plastic, but this price is acceptable.
If you can, I'd like to keep some ones (Lol)
I purchased Blue color, but I think whether it is close to Yamaha blue such as WR.
Included Parts : There is no particular problem with regard to.
The bag was amazingly messy (Lol)
Just having a problem is that you have to purchase another Option for vehicles equipped with Large Handlebar.
Since this was not in stock, I wish it had inventory at the same time.
Other than that, I am entirely convinced.
View detail
Fits: YAMAHA WR450F, YAMAHA WR250F, YAMAHA YZ250X, YAMAHA YZ250, YAMAHA YZ125, FANTIC XX125, FANTIC XE125
Swingarm will not hurt!
It is KTM's PowerParts and etc..
As Enduro gets scratched on Swingarm, it is a feeling to let Cover at Plastic to prevent it.
As far as I know, there is only here for WR.
View detail
![Handguard Evolution Integral [Evolution Integral] With Mounting Kit](https://global.webike-cdn.net/photo/article/06/1446282299106L.jpg)
Fits: Others
Hand guard change
It's the 5th handguard.
I would like to end the journey to find CYCRA Stealth Primal, then Zeta's ArmorBent twice, ArmorStraight once, and this time at Poly sports Integra Le Evo.
After all I wanted to finish the handlebar lightly We wanted to attach full plastic hand guard and tried purchasing this time.
Long ago, when I was riding KLX I attached Poly sports Integra Le with no bad image but some processing is necessary but I think that it is quite good for the price.
Although it was also in KLX, WR also interferes with the Banshow Bolt on Master's side of Brake, so if you cut it with File or Leutor about 5 mm, it will snap off.
Even if it does not cut because it is a full plaque, I will let it work but I managed to cut it down once.
When Armor Handguard was used, both Brake and Clutch lever could be NORMAL, but Integra Le Evo interferes if it is not Short lever.
I think that the feeling attached is still light.
It is recommended because the price is also cheap.
View detail
Fits: Others
For klx 125
Because it looks like for Full Size, OEMHandlebar has height and there are few places to install and Cableetc. It is difficult to install with interference of. I think that it is better to purchase Handlebar on the premise of replacement. Parts that extend the upper part of the Hand guard can be easily removed, but since there is a high possibility that it will come off during driving, Boltetc. We recommend fixing it with.
Looks also Parenthesis I think that it is easy to pick up because it is cheaper than the Hand attribute of Gold attribute and you can Arrangement by putting a Sticker well.
View detail
![DEVIL Elbow Guard [ELBOW GUARD].](https://img.webike-cdn.net/catalogue/images/13445/8002000001_TS.jpg)
It is good to consider the price.
This maker is famous for exterior Parts, but Protector was unevaluated and there was anxiety. Package is displayed as for Knee, though I thought it was good but when I read it carefully the Large people became for Elbow and I felt relieved.
Making the details is also good enough considering this price.
One thing, regrettable is the fact that it is still a little Large in a foreign product.
View detail
Those who would like to look SMART
I changed it because I did not like OEM Headlight.
I often heard that Meter gets in the way when exchanging Headlight but I am extremely satisfied because I could use the included mounting Bracket and be able to wear it smoothly without problems.
Regarding the light quantity, it is a bit brighter than the OEM - - I think about it.. (Bodily sensation)
The point which is worrisome for only one thing is the attached Elastic band, but I am a little worried that it will deteriorate quickly.
View detail
I am very satisfied.
About installation : In case of CRF 250 L Bracket that installs NORMAL's Blinker gets in the way, so it can be cleanly installed by cutting it off with the Grinder, in my case I replaced the front and rear Blinker with Unbreakable lens MINI
About light quantity : Standard comes with 35 W Halogen bulb, but the light intensity is insufficient, in that case NORMAL H4 (55W60W) It is attached with no processing
as a whole : I am satisfied that the CRF of the dull image has become a very light Image
View detail
![Handguard Evolution Integral [Evolution Integral] With Mounting Kit](https://global.webike-cdn.net/photo/article/02/1436721292502L.jpg)
Fits: Others
For those who understand
Previously we introduced POLISPORT's Hand guard to KDX 125. I introduced it this time because the shape was good for the price. I ordered with BackOrder because the delivery date is one month.
Instruction Manual Paper Paper Quantity : 1pc. Although it was not so complicated structure, I think that it is enough.
However, the center side Clamp has a hole to enter the usual Hexagon Nut and Nut comes with, but I think that it is easier to install this Nut depending on the Handlebar Bend. Even without this Nut, the outside is fixed with Nylon nut + Washer, so it can not be relaxed.
Since Spoiler is just fitting in, it is easy to detach, but branches etc. It seems likely to come off if it hits strongly, so we plan to consider the fixing method at a later date.
In addition, we Lever is changed to DRC Short and is just right Size. There is a possibility that it will be out as NORMALLever.
Because it is a Universal Product, it is for those who can understand the necessity of processing and devising to some extent, but the basic making is good, but still the price is Oak-like product + Alpha level so I like it very much.
View detail
Poly sports Halo Head lamp
I exchanged from UFOGhibli.
As it became old and it got damaged, I chose Design which Design liked so I liked it.
Compared to UFOGhibli it is a little sweet, but I think Balance at the time of installation is good.
Headlight has the same number of Watt, but I feel Brighter than UFOGhibli whether it is because the ball itself is different, whether Lens is different, Reflector is different, Light's color is different, I think so.
It is also very nice to be able to adjust the optical axis.
The exchange was easy because it was just changing Headiring's Wiring.
With exchange from NORMAL, Meter and Accessories' Light (Neutral, Blinker, High beam) I think that I have to think about what to do.
Also, when fixing to Fork, adjust the Clearance Headlight Extensions (20 mm / 40 mm) called Material : There is Plastic 's Bracket, but behind Wiring and Light is pretty cramped in the shorter one, and it will be a little longer in the longer side. I want an intermediate Length extension tool Bracket.
By the way, I thought that the White Sticker of License Plate was attached, but there seems to be nothing that said.
View detail
Front fender
It is a Fender for KX 250 but it is attached to the D tiger.
The hole is already opened, and the position of the hole is the same. Just a little bigger the hole's Large.
When installing, the hole is large, so install it while adjusting it so as not to distort.
Later, as the back side of Fender is Limit so I almost hit Clutch Cable and Horn
, Put Washer in the hole on the back side of the Fender installation hole, and slightly tilt it, the Large is durable.
View detail
Rear Fender
It is a Fender for KX 250 but it is attached to the D tiger.
I chose this because I wanted to make it a different Style if the price was cheap.
Of course the shape is quite different, so you must do it without processing.
Cutting and cutting, scraping off the hit place and screw hole, various processing is necessary.
Because the gap between Side cover and Fender is also quite open, we process and paste the Black board into that part.
View detail
It looks like modern, it may have passed - - -
【What made you decide the purchase?】
I chose the price and the KSR genealogy with an appearance that does not break too much.
I installed it in KSR - 50, but it became KSR PRO - like Sharp.
【How was it actually used?】
I have not run yet, but I think there is no problem.
Since the installation Band also fixed to the kitchen eyes, I think that there is no rattling while running, and it will not fall off due to vibration.
【Was it difficult to install? (Hard parts case)】
I also had Instruction Manual in a simple way, so I did not have much trouble (Simplified things such as which terminal is low, high, Minus, what W).
However, due to the problem of the former model, it was necessary to create Socket.
This product is Three-Pronged ForkSocket (I feel like | ? |) Therefore, it is necessary to change to the flat type Female terminal when installing.
Memo : KSR, RedBlack was Low beam, RedYellow was High beam, BlackYellow was Minus.
【Please tell me the point of installation and hang (in the case of Hard parts)】
Two types of Extension Bracket for mounting adjustment (Short and long) , Bolt, Nut, Washer, tooth seat Gold, Elastic band for Fork installation contains X4 respectively.
Material : Because it is Plastic, I think that considering that it is difficult to drop off if you dig into the tooth seat gold firmly.
wonderful.
The photo is attached with a long Bracket.
It is a bit of a front-run feeling, but Wiringetc. Because there are many, I think that it is just right.
[Is there anything I was disappointed about?]
There is none
【Hope for Manufacturer - Please let me know if you have any improvement points]
Package can be easily opened - - -
I was relieved if I was fixed with SEROWTape or Stapler.
【Have you compared items?】
Stringer Bikini Dual Head Cowl of A-TECH and Cheap HeadCowl sold from Motorcycle PartsCenter.
From the price and appearance, I finally settled down in Kore..
A - TECH 's are a little expensive, MotorcyclePartsCenter' s are so cheap and scary, look a little ,,,
[Others]
Although I purchased with a momentum, I am satisfied with my coffee being better.
A little bit different (In the case of KSR - 50, it changed a lot) Recommended for those who want fashionable Custom!
View detail
![Handguard Quest [QWEST] With Plastic Mount Kit](https://img.webike-cdn.net/catalogue/images/12302/8304200030_TS.jpg)
Since it is not a special item, ingenuity is necessary for installation
When attaching Hand guard to MT - 07, let 's let' s always release Bracket extending from Handlebar from the top of Handlebar.
It is better to take out from the bottom as Style - The fit also looks good, but when you break Handlebar, Bracket hits the tank.
Because it is not a special item, some ingenuity is necessary, but it is okay if you get used to it. It looks like it looks good
View detail
The shape is Parenthesis!
I bought it for DRZ-400SM.
Although it is not installed yet, it is Large Kimono, the shape is perfect feeling.
The price is satisfied with Reasonable.
View detail