Reviews
Lightweight skid plate!
This is a light Material:This is a Plastic Skid plate.
But it seems to be quite strong.
I chose ACERBIS Black because I don't intend to use it for hard use like TRIAL or attacking rocky terrain.
The body of the car is Color:Gray and Orange, so Black, the same color as the Frame, blends in well.
The installation went on easily without any positional issues. First, I applied grease to the screws and tightened them once only with screws.
When replacing the Oil, it is necessary to remove it, but it seems to take about 5 minutes.
2023 CRF250L Installed on 8bk-md47.
View detail
Installed on an EC250.
I installed it on a GASGAS EC250 2023, which I always use for forest road touring.
Many StudsBelt from other companies are just Nylon, but ACERBIS products have a type that keeps the shape of the holding point firmly, so they are very good for mounting on motorcycles.
It is easy to hold and functions well when you actually get it pulled.
It has a Custom feel and is my favorite StudsBelt!
View detail
I’m satisfied~!!
I installed it on a Hunter Cub CT125 a while ago and liked it so much that I bought it to attach to a CRF300L. I recommend it as it is more luxurious than the similarly priced Criga. I don't have a picture of it before installation, but I expect it will fit very well. Buy it while it's in stock~~ -------------------------------- -------------------------- Recently, it was mounted on the Hunter Curve CT125. I liked it so much that I bought it to the CRF300L. I don't have a picture because it's installed before it is installed. Powered by Google Translator View detail
Surprised at the low price. Installation requires removing and inserting Bolt.
This is a great price for these Parts! It is such a good price!
The Engine Case has hit the rocks many times when it has fallen over, and the Shift Pedal has often fallen into the Case.
Good people don't fall down, but for ordinary people it is very, very hard....
Therefore, we thought it would be better to have a little extra weight than to have the Case go away, but we thought it would be better to have a little extra weight than to have the Case go away.
This product is plastic, so it is very strong! This product is made of plastic, so it is not very strong, but I think it will miss any impact that could lead to breakage.
Above all, it looks good. I like it.
Hand guard and Under Guard are also available at ACERBIS in good shape.
View detail
Frankly
I bought this for everyday use with the for SportsKnee brace because of a ligament and meniscus injury. After positioning the knee brace, tighten the band a little tighter and fold the upper side over the knee brace, both the knee brace and leggings will not slip down and can be used from morning to night without adjustment. I think it is a little short for the Leatt knee brace, but I will use the for SportsKnee brace for Asphalt Touring, so no problem. The only downside is that the sewing is not very good and the threads have already broken. View detail
protection against cold
Inner Weight inside Handlebar Pipe must be removed.
The Handlebar on my vehicle is welded with a Weight of Plug.
I purchased a Handlebar separately since it is non-disassembled.
Tightened up with M8 Socket Bolt included in the structural
The structure is fixed in place, but it must be torqued considerably.
It is not locked, so be careful of head slugs.
I have covered with HondaOEM Handlebar Upper Holder Cap.
View detail
Mounted on TT-R125
A little ingenuity is needed, such as moving Switches to the mounting.
I was told that even Plastic is sturdy, so I installed it.
View detail
Simple but good performance
It looks good, but the grip is good, so there is no burden when standing due to the grip of the boots and chassis. Installation is very simple and I think it's good because it prevents scratches.About quality and texture View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
Transporting Dirty Boots
I bought this because I put my dirty Boots in my car as it is and the mud falls off.
GAERNE FastBack also fits in with room to spare.
The functionality of the product was satisfactory.
View detail
Firmly.
Tools to be used include
Hexagonal Wrench 8mm and 10mm
Torx wrench T20
Instruction Manual with pictures is provided to make it easy.
When running, you may hear the sound of the Chain and Chain Guard making contact when the Axel is returned
I was painfully aware that Chain was swinging
View detail
ACERBISFENDER
I was worried about the fitting with the light cowl on my XT250X, but it fits well.
The overall length is not much different from the OEM Product, so it has been extended backward, but there is no contact with the Frame.
View detail
Firmly.
Tools to be used include
Hexagonal Wrench 8mm and 10mm
Torx wrench T20
Instruction Manual with pictures is provided to make it easy.
When running, you may hear the sound of the Chain and Chain Guard making contact when the Axel is returned
I was painfully aware that Chain was swinging
View detail
When the Center Stand is installed, a little effort is required.
The Instruction Manual indicates that the cover under the tank must be removed for installation, but it can be installed without removing the cover.
On the Left Side, the lower claw is first fitted and then fastened with two bands (Large and Small).
The Left bottom of the Right Side Cover interferes with the Center Stand, so it must be trimmed, including the claws.
I think you should cut at the base of Radio pliers and Cutter to Beauty!
Then fasten with Largex2 Band
Bundling Electrical Cord Covers Next Needle Gold Makes Banding Easier
View detail
Fits: HUSQVARNA FE 250, HUSQVARNA FE 350, HUSQVARNA FE 450, HUSQVARNA FE 501, HUSQVARNA FE 350S, HUSQVARNA FE 450S, HUSQVARNA TE 150i, HUSQVARNA TE 250i, HUSQVARNA TE 300i
Extremely happy,Would recommend
Great kit. impressed on fit and price. Don't know how they pay for material and molds and maintain the price point but the figured it out. I may even get this kit with next new bike and save original plastic Everything came well packaged. Had to use a heat gun and re-shape the rear side panel a lil to get it to fit perfect but as expected for new fenders. Good quality and good finish. I've always had good luck with the fitment from acerbis and the durability is on par with the oem stuff. Have wrecked a few times racing off-road and haven't had any snap or bend. Webike is very fast, perfectly packaged, the only downside is the high shipping costs. I have been shopping with Webike for years without any problems. I recommend it. View detail
good-looking
It sticks tight like OEM. The ankle grips are good and easy to stand on. The ORing for the fixation may break someday, but it can be fastened with a bundle of wires, and the mechanics at the motorcycle shop liked it. View detail
Hole position is not good
I put it on my 8BK-MD47, and the holes on the Left side are not aligned when viewed from the Front, so I had to force the Left side up, then the Right side up, then the Bolt in the rear to get the Bolt to fit. If there was a penetrating hole at the oil drain bolt position, it would have been better to save the removal when changing the oil. View detail
Mounted on Hunter Cub. I am satisfied.
CT125 2023 한국버젼 헌터커브에 징착했어요. 배송도 빠르고 다른 천재질로 만들어진 제품들보다 확실히 고급스럽가. 제품안쪽에 마치 쇠처럼 탄탄하게 모양을 유지해주는 방식이라 덜덜거리지 않고 잘 고정되어 거추장 스럽지 읺습니다. 대만족 ---------------------------------------------------------- CT125 2023 I was journey to the Korean version of Hunter Curve. Delivery is also faster and more luxurious than other genius products. It is a way of maintaining the shape as if it is iron inside the product, so it is fixed well and is cumbersome. Extraordinary Powered by Google Translator View detail
For summer
I wanted a Jacket with removable sleeves because summer has been too hot lately.
There used to be a lot of AXIS so and so and sinisalo.
I'm not comfortable wearing only Motocross Jersey no matter how hot it gets, so I'm going to wear Body & Elbow guard with it.
I'm 176cm.85kg. and I'm a big guy.
This is quite Large tight, even in XL there is room to put a Guard underneath.
View detail
Exactly to TENERE
I bought this to hold up my TENERE, and it has a frame in the Belt section, so it maintains a U-shape with a single body, so it can hold the TENERE down fender at the top of the Fork. The seal that comes with the bike is paper and has a strong adhesive on it, so if you put it on your motorcycle, it will be a hell of a mess.
I did.
View detail