Reviews
No problem, no problem, no problem
There is no wobble and no problem. View detail
Fits: YAMAHA SR500, YAMAHA SR400
Finally normal.
[How is it used?
The difference between the Large model and the previous model is that the 65Π Mini meter can be used, so it is a Large evolution!
Was the one you received as per Image?
I used the initial MODEL and it was just like the Image.
Was the installation difficult?
As a beginner, I found it difficult. (p∀p)
The MainLight also had to be removed and installed as needed, so it was not an easy replacement.
How was your experience with it?
Meter is a Large percentage of the Cockpit - I am quite happy with the conversion!
I wonder how long the black color of the panel will last without fading, the color peeling of the early models was very bad;
[Included Parts:were they on? None
[Was there anything that disappointed you? Disappointing parts include the good parts - nah!
In addition, there is no Instruction Manual, so it is difficult to convert from OEM.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: YAMAHA SR400, YAMAHA SR500
Good for SR400 cafe style
This meter bracket mihgt gives your bike very good line for caferscer style with seperste handle position. Compare with other brackets is the best I guess. It very quite fit with OEM meter. View detail
OEMParts are also available, but
Cost performance is available.
There is some play when you put Bolt in.
I think it's a good enough substitute.
View detail
Accessory Case
I don't want to put a large back, so I was looking for a small Accessory Case, and I liked this product and bought it.
It's a very stylish oil tank style and I use it to hold my vehicle inspection certificate.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
For the Fuel Cock Overhaul.
I'm currently using a KEDO Cook, but before that I used an OEM overhaul. This is the Parts that I was able to take care of at that time.
It's not a bad idea to buy a Cook as it will deteriorate over time.
good point
It is an Exclusive Design, so it comes with it except for some years.
The packaging is made of paper, which was a concern with OEM.:You can use it repeatedly because it is made of plastic.
I've been using it for about 5 years.
A bad point
●Installation is a pain. The best is definitely to take Gasoline completely from Tank and take Tank out from Frame.
It's also very durable, so once you overhaul it, you can use it for 4 or 5 years, so I think it's cosmetically sound.
It's a good part because it improves the weak points of OEM such as packing.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
It doesn't fit!
’85 Doesn't fit as a 1jr OHKit, the Diaphragm will somehow come on! Four-analogue Rubber parts can be used, OthersCookO-Ring shape is wrong, Tank attachment O-Ring too skinny and buried in the groove & hellip;
Only the Diaphragm without OEM Parts could be used somehow, but there seems to be some time lag to stop the flow of Gasoline because there is no hole for negative pressure release.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
I think it's probably Large sturdy.
Gasoline leaked from the fuel cock on my 20+ year old SR400 as it was seeping out, so I replaced it.
Since there is no diaphragm in Yamaha OEM Parts, I bought an Overhaul kit from Freaks Pit and replaced it.
As I expected, the diaphragm was torn.
For the time being, Gasoline was put in 5?Gasoline and saw how it looked, but it seems to be Large sturdy.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
It is a product that picks people.
Gasoline slightly from Fuel Cock
Because it was blurred, ordering and disassembling and exchanging.
I would like to tell SR members
Also in service manual
Because the negative pressure packing part is not listed
It may be better for those with some knowledge. Or remember well after Rose
I acknowledge my own shortage of Kill
After assembly, before Gasoline replaced
Because it does not stop at the ON position
I ordered OEMCookAssy.
I appreciate it with the Instruction Manual.
View detail
Fits: YAMAHA SR400, YAMAHA SR500
It's neither good nor bad
Purchased for Custom to Cafe-style.
Even if I read Instruction Manual, I do not understand how to install, but for now I understood the meaning of the Instruction Manual, and it was easy to attach to Meter.
Just fix it with Top Bridge Screwetc. Because it was not included, there is a time and effort to purchase separately.
Texture feels scanty for price. (Light weight in a good sense)
The shape is perfect for Cafe-style.
Rear Sets, with Separate handle posture you can see Meter without problems.
The price is expensive!
View detail
Fits: YAMAHA SR500, YAMAHA SR400
I think it's good
I think that it is good but I regret not being able to change the position by turning Meter. I think that I can turn it by removing the Clip, but there is a possibility of getting scratched. View detail
Fits: YAMAHA SR400, YAMAHA SR500
OEMMeter beautifully with Separate handle
By using Separate handle, it was possible to lower the Meter floating and looking natural
To remove the Meter Cover and remove the internal Rubber Scissorsetc. It is necessary to process with, I think whether you can understand by staring at the item and the manual
Since the Speedometer side has Knob, it may be somewhat difficult when adding Cover
I offset it ahead by cheating Universal Bracket I bought in Homsen because ETCAntennas interfered (It is not beautiful)
Coloretc. I think you can also lower it to a lower position using
Recommendation for those who like OEMMeter
View detail
Fits: YAMAHA SR500, YAMAHA SR400
Overhaul of Fuel Cock Overhaul
As aged deterioration caused leakage from Fuel Cock, leakage was from the part without Manufacturer 's Single Item supplement, so we were considering ASSY exchanges unavoidably, so we found this item so we purchased it immediately.
Disassemble by removing Cook - Because it becomes an exchange, handling of Gasoline (Of course it is not allowed to ignite the fire) I think to Level's work which can be done without difficulty by replacing it with care.
Only Hexagonal Wrench and Phillips Screwdriver are necessary tools. It is even better if you have Brakes cleaner for cleaning and RubberGrease to apply to Rubber packing classes.
Although it may not be necessary if it possesses an exploded diagram etc, there is no attachment of Handling Instruction Manual, so it is recommended to arrange parts to be disassembled in order to replace Smooth To do.
I felt that the resin Washer was also attached to Product Contents and it was kind.
Note) Rust on the screw head (Especially Plus screw) If it is occurring you should work carefully so as not to crush the head.
View detail
Fits: YAMAHA SR500, YAMAHA SR400
The position of the Meter could be lowered to the position as expected, and appearance became good [ a Normal meter ]. And it is coming exactly, so that an external article cannot be thought.
The position of the Meter could be lowered to the position as expected, and appearance became good [ a Normal meter ]. And it is coming exactly, so that an external article cannot be thought. View detail
Fits: YAMAHA SR400, YAMAHA SR500
When calling it the Cafe which has ridden on the Cafe-style of SR, a Mini meter is the royal road, but it is quite recommended at those who want to install low so that he may like a pure Meter and it may also suit a Cafe.
When calling it the
Cafe which has ridden on the Cafe-style of SR, a Mini meter is the royal road, but it is quite recommended at those who want to install low so that he may like a pure Meter and it may also suit a Cafe.
View detail