Reviews
Fits: HONDA VTX 1800, HONDA VT 750 S, HONDA VT 1300 CX Fury, HONDA VT 1300 CX, HONDA VF 750 Magna, HONDA VF 700 C, HONDA VF 750 C, HONDA VT 600 Shadow bis Baujahr, HONDA VT 600 Shadow, HONDA VT 1100 C Baujahr, HONDA VT 1100 C, HONDA VT 800 C, HONDA VT 700 C, HONDA VT 500 C, HONDA VT 125 Shadow, HONDA VF 1100 C, HONDA CMX 450 Rebel, HONDA CMX 250 Rebel
It was not compatible with VT1300CX.
I bought it because it said it was compensated for conformity,
The mounting did not fit into a 2010 VT1300CX.
I had no choice but to shave it down and install it.
However, if the shaving is a little too much or not flat,
It is expected that the rattling will be so severe that it will be unusable.
After installation, I am satisfied, but it is for people who can do the processing well.
View detail
Fits: SUZUKI M 1800 Intruder
Even with the body Silver, CinderellaFit!
RefreshingImpact increase around the ass. If you have Custom sense to wear it, you can put it on right away. I put it on at night and look forward to seeing it during the day. View detail
HIGHWAY HAWK Hydraulic Brake Pressure Switch with Banjo Bolt
About quality and texture - Top quality. Nicely assemblied pressure switch with harness and additional male electrical connector. About the feeling of use - The rear brake lever now operates the brake light everytime without fail, no more having to adjust the out dated switch and spring setup from Honda. Products to buy together - A brake air bleeding set is great to also purchase when you are needing to bleed your brakes for a component change or for routine maintenance. Difficulty of installation - Medium level of difficultly to add this switch to your motorcycle as you will also be needing to do some wiring to get this connected and then perform a brake bleed to remove any air introduced into the brake system during the process. Cost performance and comparison with other products - Best value hydraulic pressure switch here on Webike and it's great that Highway Hawk include the male electrical connector for those that may be required to change this out on the OEM wiring harness. About shipping and packaging - Sea freight is my preferred shipping option and usually arrives in Australia in 6 to 8 weeks from dispatch. Always well packaged to ensure parts arrive safety and are ready for use. Any concerns, cautions, or advice when purchasing - Before purchasing ensure you have the correct sized banjo bolt pressure switch and when it comes to your braking system, if you are not confident in carrying out the job yourself then please look into getting a mechanic to do the work for you. View detail
Fits: SUZUKI VL 800 Volusia, SUZUKI M 1800 Intruder, SUZUKI M 800 Intruder
It's more upscale now.
Mounted on M109R.
It is thicker than OEM and looks more luxurious.
It's also long, so it's fast, so it might be easier to flush.
However, when the foot is placed in the middle of the Peg, the GEAR and FootBrake are far away, and the foot needs to be moved to the inside, but the inside has the element of slipping without the Rubber part!
I think it's better to operate the heel axis with only the toe pointing inward.
View detail
Used on Rocket 3 R 2020 model
Rocket 3 R is equipped with Bar end mirror as standard. The mirror is so far away from the center that the rider can only see the next lane. You can't see what's right behind you. I know some people think the bar end mirror looks cool, but I think the invisible mirror is not good.
So I removed the Bar end mirror and installed this mirror instead.Rocket 3 R NoHandlebar is special 1-1/4Inch.Harley-Davidson (H-D) Quantity of Mirror Clamp Kuryakyn 2792 for:2pc. SetBuy it separately. (Unfortunately, they are not sold on Webike. Use other ShopSite) I installed it.
Note that the Nut of the Adapter is 1/2-inches, not millimeters. The Bolt With Hexagon Hole used to fix the Kuryakyn 2792 to the Handlebar is also not millimeter. 9/64Inch.
On Highway Hark's Site, it is written that Adapter 91-304009 should be used for mounting on H-D. However, there are several Adapters supplied with Mirror, and if you use them, you can fix the above Mirror Clamp without any problem. On the contrary, 91-304009 is completely useless and should not be purchased. (The Arm of the Mirror is a Receptacle screw, and 91-304009 is also a Receptacle screw, so it cannot be connected.)
View detail
Fits: YAMAHA XV 1100 Virago, YAMAHA XV 750 Virago, YAMAHA XV 750 Virago, YAMAHA XV 1000 Virago
This is not something an amateur can install.
There are too many problems.
The only thing that fits is the Hole Pitch.
It is not possible to install it as it is.
It requires processing and ingenuity.
BlinkerWiring will also not be able to reach you.
The release position of the Blinker positioning protrusion is incorrect.
Interference with Sissy barFrame.
It must be at least 5mm more and the round bar mounting position must be on the outside.
The round bar is too far inside and the Bag interferes with the Suspension.
Normal people shouldn't buy it.
View detail
I don't know what to do.
I will say this after knowing that there are not many Parts because they are originally rare car Parts.
At first, I ordered the Black one, but when Manufacturer didn't have it in stock, it was cancelled.
I will then order Silver and the shipment will be shipped after November 24.
They asked me to cancel it or wait for a reply.
The next day after I replied that I would wait, I received an email from the Manufacturer stating that they were out of stock and would cancel the order.
So what was the text message from a day ago?
HP. The "NEW It is still listed as such. Lack of control.
I will never buy here again as they are very unresponsive.
View detail