Reviews
Since the position of a hole changes with vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CR
Since the position of a hole changes with
vehicle types the Design in which structure is solid is [ vehicle types ] also a Cool. [ which must attach by itself according to a Motorcycle, and must make the hole of business although I attached to CRM ] [
]
If this to which the
Seal containing a grid is attached is stuck, most vehicle types so that the position in which the
hole is made may be known.
it changes --
--
in which I made the hole by the Cordless drill by gauging --
which any problem does not have and was able to be attached finely -- since it is very pleasing, it has by two different colors.
The red Fender of the
photograph is raised 5 cm, is attached, and there is.
Affinity with a Front number is also one article of the
Recommendation in an Exactly.
View detail
worried from before in order to soften the cold of the hand of winter -- this product was purchased. -- being first related with attachment -- it is -- although -- a Switch and a Brake lever need to be moved somewhat. Although it attaches
worried from before in order to soften the cold of the hand of winter -- this product was purchased.
-- being first related with attachment -- it is -- although -- a Switch and a Brake lever need to be moved somewhat.
Although it attaches and stands about one month, a Best position is not yet decided.
If there is nothing with it being as
, next a protection-against-wind effect, it is completely different, but superfluous expectation is a prohibited thing
.
A hand will become painful if really cold (about 10 degrees or less).
, of course, a Wintergrove is absolutely required.
View detail
It was charmed by form and has attached to the MOTARD. Although the BALI etc. were in the fine place with overseas products, it is satisfied in general. attachment requires a drilling process according to a vehicle type.
It was charmed by form and has attached to the MOTARD.
Although the BALI etc. were in the fine place with
overseas products, it is satisfied in general.
attachment requires a drilling process according to a vehicle type.
View detail
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry,
At a thinner peak, a car body is this much high, and surely Gasa is touched in case of a broad Handle several times.In such a case, he is and sometimes thinks several times that it was good.I think that it is an ant as protective gear.As a point to worry, I think that the air resistance at the time of high speed operation, etc. will be what how. View detail
The color and the form became a Forme appropriate for a MOTARD after satisfaction ♪wearing.
The color and the form became a Forme appropriate for a MOTARD after satisfaction ♪
wearing.
View detail
Appearance is smart considering a price. Although attachment needed to shift the Brake and the Clutch lever inside, sense of incongruity in particular did not have operativity. Since the Stay seems to be weak, durability is worries for a while.
Appearance is smart considering a price.
Although
attachment needed to shift the Brake and the Clutch lever inside, sense of incongruity in particular did not have operativity.
Since the
Stay seems to be weak, durability is worries for a while.
View detail
When having ridden on WR250X before, the Big tank of IMS was attached, but since the attached Tank cap had no key, this product was purchased. When various information was seen, saying, The latest Tank cap does not match the Big tank of IMS appeared
When having ridden on WR250X before, the Big tank of IMS was attached, but since the attached Tank cap had no key, this product was purchased.
When various information was seen, saying, The latest Tank cap does not match the Big tank of IMS appeared here and there, but he was attached perfectly.
It purchased [ at / the end / of Heisei 23 /, or beginning time of Heisei 24 ].
If locking it somewhat in total, the Cap itself can race and open this Tank cap, and it will say that there is nothing.
Since it was the
screw type, he tended to think that it was necessary to fasten firmly, but about [ which stopped lightly ] was OK.
signs that it was attached to the upper part which rose with the Big tank since the
Cap itself was a splendid size -- completely -- a paunch -- -- it is --
which is touch called べそ (smile) -- even if it fastens firmly and incidentally does not fasten, a Gasoline spouts and comes out a little.
If you notice again, an earnest Gasoline from between a Cap and Tanks ...
There were several こ to say.
Since it is a Cap of a reverse key although it is
, it is a Recommendation at those who want to feel easy about theft prevention etc.
View detail
First, when wearing is considered to FZ-1, if it is a pure Screen, it cannot attach because of interference. Since I still had interference although I had changed into the Smoked screen of the Y's Gear, I cut the Screen manually and attached it. It atta
First, when wearing is considered to FZ-1, if it is a pure Screen, it cannot attach because of interference.
Since I still had interference although I had changed into the Smoked screen of the Y's Gear, I cut the Screen manually and attached it.
It attaches firmly rather than it was worried about vibration etc. since the
mounting arrangement was fixation of only a Bar end, but having considered.
When it becomes high-speed, some deflections are Levels permissible although it generates.
I think that there are no worries about fall.
The problem is a case where attach once and it removes again, rather.
Once it attaches firmly, in order that the metal fittings for Fittings may cause plastic deformation within a Handle, it becomes impossible to take out easily.
Since it will be miserable when the Nut of the receptacle by the side of a scalpel is dropped on an inside by mistake, cautions are required.
In my case, it mainly purchased for the purpose of protection against wind, but though it is small, it is preeminent for an effect.
I think that the direction which runs especially the high speed of winter for a long time can realize an effect fully.
There is value tried more previously of putting in a Hot grip.
A synergetic effect will be acquired if both are introduced, of course.
It has been two years or more since it equipped, but it speaks [ whether it is new and ] well.
How many times did it exchange with whether it is pure and it being able to say and being external?
I regard at least it as matching FZ-1.
Since it is slim form, I think that it is good also for various vehicle types including other NAKED vehicles.
It is touch called the Items which those who do not claim too much and understand and yet understand.
Since it will consider [ that it can attach with almost all vehicle types, and ] if there is no interference, it is a Recommendation.
p.s The hidden effect is w which is becoming easy to hook a load on a Handle on the way from a Convenience.
View detail
It purchases for an Appeal in a front face. Although I think that quantity of light is enough, since the gap of each LED is larger, it is the touch in which it is better to call it six LED rather than the Line of light. Although the problem of manag
It purchases for an Appeal in a front face.
Although I think that
quantity of light is enough, since the gap of each LED is larger, it is the touch in which it is better to call it six LED rather than the Line of light.
Although the problem of management of a power cord has
attachment, a Fitting is not bad in general.
But since a coiled power cord like the code of a telephone currently attached did not have so very well appearance, it cut with the root and changed into the electric wire prepared on its own account after it.
Although
structure top waterproofness is not [ high ] so, and it ran also in the inside of the heavy rain several times, for the moment, it is not hit by Troubles, such as fault current and failure.
But since the Fuse is not attached, it is necessary to prepare the fault current worries direction by oneself.
In the direction where a wearing person wants to make little Dual-road Hand guard into a Maniac further primarily, it is recommended.
View detail
Although attached to the DJEBEL250 XC, I think that it is so comfortable. Since the atmosphere of a Motorcycle changes only by carrying out Front-fender exchange, it is recommended. Although the fender effect in a path through a wood is an unknown --
Although attached to the DJEBEL250 XC, I think that it is so comfortable. Since the atmosphere of a Motorcycle changes only by carrying out Front-fender exchange, it is recommended. Although the fender effect in a path through a wood is an unknown -- View detail
Although the so-called Handle guard is looked for and the thing smart also for whether it being a tub was found, although it thought that MT-01 would not enter and would give up in an adaptation vehicle type, it remembers that the thing for FZ1 has equip
Although the so-called Handle guard is looked for and the thing smart also for whether it being a tub was found,
although it thought that MT-01 would not enter and would give up in an adaptation vehicle type, it remembers that the thing for FZ1 has equipped satisfactorily by the LED Blinker before, and this is also made -- it will be -- it purchased by saying.
Although it did not go into
adaptation vehicle type, it has equipped very easily.
Probably, it will be certain that an air screen has an effect in winter at the same time it became quite smart.
MT-01 became a circumference of a Handle like Dual par Perth specification popular now.
Incidentally MT-01 is 2009 models.
View detail
Since the Front carrier was attached, it purchased to pay a tool. bottom is harder structure and a Bolt, a Nut, and 4 sets of Washers are contained. The Washer is a fairly larger Washer. If it fixes to the Carrier etc., the kiln of the Stay
Since the Front carrier was attached, it purchased to pay a tool.
bottom is harder structure and a Bolt, a Nut, and 4 sets of Washers are contained.
The
Washer is a fairly larger Washer.
If it fixes to the
Carrier etc., the kiln of the Stay will be carried out to a bottom, and the Bolt stop of it can be carried out to it.
Since an excessive portion can be bound and a tool riots, it does not become precocious.
It is a Recommendation.
View detail
"I purchased when changing the image of the exterior of DT125R. Since I thought ""to make an OFF vehicle (trail) image light a little more"" I decided this!! It is recommended for who ride on the OFF vehicle for commuting or a run in the street. I don't c
"I purchased when changing the image of the exterior of DT125R. Since I thought ""to make an OFF vehicle (trail) image light a little more"" I decided this!! It is recommended for who ride on the OFF vehicle for commuting or a run in the street. I don't carea bout it although it does not immediately get dry after a car wash. it is very fashion. " View detail
"Since I wanted to use the rear fender of DT125R (34X) as it is in my case, the product was cut and attached. A black portion is hard and processing was timetaking but I think there is enough reinforcement. Moreover, since even for a 125-cc small number,
"Since I wanted to use the rear fender of DT125R (34X) as it is in my case, the product was cut and attached. A black portion is hard and processing was timetaking but I think there is enough reinforcement. Moreover, since even for a 125-cc small number, there is no width which vacates a fitting hole, it is necessary to install in between the stay which attaches a number separately." View detail
[Webike Monitor] It is used in order to make CRF 100F into public road specification. Very satisfactory, since a Rear fender is well suited as ordered. attachment Screw is for [ which is fundamentally made somehow in gauging although it is at
[Webike Monitor] It is used in order to make
CRF 100F into public road specification.
Very satisfactory, since a Rear fender is well suited as ordered.
attachment Screw is for [ which is fundamentally made somehow in gauging although it is attached once ] persons.
View detail
D-Tracker was equipped. Since it is a general-purpose article, the mounting hole is not opened. Compared with the pure fender which was slow in action, it became sharply and smart. I think that it is a product good for ? image change whether a
D-Tracker was equipped.
Since it is a general-purpose article, the mounting hole is not opened.
Compared with the pure fender which was slow in action, it became sharply and smart.
I think that it is a product good for ? image change whether a cooling effect rises in case of an air cooling motorcycle since a wind hits an engine in the hole of the fender rear.
View detail
Although the size was also right just, and appearance was also smart and was satisfied considerably, the root of the left-hand guard portion broke in one day. Since happy height adjustment had become two steps, it was able to use was able to change he
Although the size was also right just, and appearance was also smart and was satisfied considerably, the root of the left-hand guard portion broke in one day.
Since happy height adjustment had become two steps, it was able to use was able to change height.
However, it has broken into next week the whole stay shortly.
Use in two days is impossible.
I think that he will repent if it does not purchase on the assumption that it does not fall over.
It did not break, even if it became that full of a crack tatters, using the hand guard of Jeter same incidentally type for one year or more.
It does not seem to be as how to fall over individually was bad.
View detail
It is wearing to SEROW 250. Although the design was pleasing and purchased, attachment has a little difficulties. Although a brake hose is not contacted just before, it will interfere in a clutch cable greatly. Although the angle of a lever ho
It is wearing to SEROW 250.
Although the design was pleasing and purchased, attachment has a little difficulties.
Although a brake hose is not contacted just before, it will interfere in a clutch cable greatly.
Although the angle of a lever holder is adjusted and the burden is kept from being applied as much as possible, to attach this product, a certain amount of compromise is required.
Moreover, in the case of SEROW 250, it is necessary to make a hole in grip end using a cutter, a nipper, etc.
The throttle side is removed till the place where a grip and a throttle do not contact a hand guard.
Since a throttle stops returning and it is dangerous, if it interferes.
View detail
A price is cheap, also says appearance and also guards a wind firmly. Merely supporting only at one side, a crack of the stay by vibration is slightly anxious.
A price is cheap, also says appearance and also guards a wind firmly.
Merely supporting only at one side, a crack of the stay by vibration is slightly anxious.
View detail
It was used for the forza Z. It has been divided although the thing kijima:KIJIMA handle air guard was stuck before, and a few was only thrown. This product is far strong if compared with it. A design is also good. Although an attached at
It was used for the forza Z.
It has been divided although the thing kijima:KIJIMA handle air guard was stuck before, and a few was only thrown.
This product is far strong if compared with it.
A design is also good.
Although an attached attachment screw is M8, since the bar end of a forza is M6, the hole bolt of M6 is required for it.
Moreover, if an about 30-mm spacer is put in and attached between bar end and a hand guard, it is settled finely, and he is smart and there is sense of security.
Although it is expensive, it is an article of good structure.
View detail