Reviews
Fits: HARLEY-DAVIDSON Pan America 1250, HARLEY-DAVIDSON Pan America 1250 Special
Bare Nut Blindfold Cap
Just push it in and fit it in. It will look good. View detail
Position Improvement
After wearing the shoes, I used to feel pain in my elbow area after running for about 30 minutes, but I was fine, as if the position had become easier.
I have not tried it in Touring yet, but it seems to be effective.
However, there were scuff marks on the surface and the paint was falling off. Quality control is questionable. It is a pity.
View detail
2016MODEL also ….
It is a 2016 MODEL and has the exact same problem as diceK's 2018MODELImpression.
The Left SideParts cannot be bolted on and require POM-C machining, so it is not recommended to purchase unless you can do it yourself.
View detail
Fits: BMW R1200RT, BMW R1200RT, BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW RnineT, BMW RnineT, BMW R1200R, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW RnineT /5, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT Racer, BMW R1200S, BMW R1200ST, BMW HP2-MegaMoto
I think it's better to have it than not to have it.
Easy to install.
The only drawback is the price, which is too high even if it is for imported cars.
View detail
Fits: BMW R1250GS, BMW R1250GS Adventure
You didn't paint it.
I ordered the 40th anniversary MODEL.
I don't know if it is expensive or cheap because I don't have any other products to compare it to.
A solid product.
The frame guard comes standard, so the included Elastic band for mounting cannot be used, but the shape is well thought out, with one screw fastening point.
There is no worry that it will come off while driving.
However, the pattern is Sticker, which was disappointing for me.
It looks like it will peel off someday from the feel of the Material on the Body.
Consider painting.
View detail
With Wonderlich, it doesn't hit Under spoiler.
There are two Front Extender Fenders for R1250RT, this Wonderlich and P&A Internationa's, but I can't use P&A Internationa's because it hits the Under spoiler when I cut the Handlebar! I'm not sure if that's what you mean. Well, there is a note of caution. Some vehicles hit the under spoiler." It says so, so maybe some of them don't hit the mark, but mine did.
I bought the Wonderlic one because it has a clearance with the under spoiler, so I can use it with no worry, even if I cut the handlebar. The width is also wider than the P&A Internationa, so the protection to the EngineFront cover is even stronger.
It is not good for mental health to lose parts that cost close to 10,000 yen.
View detail
Fits: BMW S1000RR, BMW S1000R, BMW M1000RR, BMW M1000R, BMW M1000RR
Mounting Simple, convenient.
As others have commented, it's useful, but as with Fastener, it's One Side, so why not ・・・・
Thank you very much for your response to my inquiry about the possibility of installation. It was a good opportunity for me to purchase it.
After all, it is a bit expensive.
View detail
Safe because of its wide width
It is on Title Street and will be wider, so the sense of security is different.
It is a little bit expensive!
View detail
Fits: BMW RnineT, BMW RnineT Pure, BMW RnineT, BMW RnineT /5, BMW RnineT Racer, BMW RnineT Scrambler, BMW RnineT Urban G/S
It's just too expensive.
Color of RnineT:Purchased to replace Unpainted Pearskin Resin Section Parts sequentially.
I actually bought a similar Chinese Ver from Amazon before this.
The forceful way of fixing the resin parts with wooden screws discouraged me from using it.
I knew it would be expensive, but I chose the Wonderlich product, and I think it was the right choice.
First of all, the Screw that comes with the Wonderlic is Torque, as is the case with other parts made by Wonderlic.
Since there is no Hex in the Bolts used by OEMs, it is important to unify these Bolts.
Installation is also simple, with a part sandwich, part pipe clamp, and part double-sided tape installation method.
Fitting is good.
The price is high, but there is nothing I can do about it because I can't buy it too cheaply even if I try to import it myself, so I have to give up.
View detail
Is this the same thing as RoughAndRoad?
I think it is exactly the same as RoughAndRoad's Throttle locker. Under Product Right THROTTLE ROKER but the letters are exactly the same. View detail
Fits: BMW R18, BMW R18B, BMW R18 Transcontinental, BMW R18 Classic, BMW R18 Roctane
For your peace of mind in case of emergency
The R18B's Front Fender is long and I wondered if protection would be necessary. However, I installed it in case the fins of the oil cooler were damaged. I don't know how well it works, but it looks better!
Before the installation of the grille, the oil cooler area was all black, but now I like it because it blends well with the plating on the exhaust pipe, engine guard, and other parts. I think it will be more useful especially on the R18, since it is a short fender.
View detail
Fits: BMW F750GS, BMW F850GS, BMW F850GS Adventure, BMW K1600GT, BMW K1600GT, BMW K1600GT, BMW K1600GTL, BMW K1600GTL, BMW K1600GTL, BMW R1200GS, BMW R1200GS, BMW R1200GS Adventure, BMW R1200GS Adventure, BMW R1200RT, BMW R1250RT, BMW R1250RT, BMW R18, BMW RnineT, BMW RnineT, BMW S1000XR
Heller Socket Replacement
I want to secure a power source for my handheld navigation system and radar detector around the handlebar. This product is a refreshment replacement for the SocketBody, and although it requires some modification, including disassembly of the meter, it looks great. View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
GS standard
This is a GS standard product that rises approximately 30mm in height and 26mm in front of the handlebar. This kit can be set to fit the Japanese human body shape, which is shorter in height and arm length on average than Westerners.
W's products are absolutely perfect in terms of material and component precision.
On the other hand, the instruction manual (MinusPoint star) is a bit of a disappointment. I found an installation video on YouTube that hit the nail on the head, so I referred to that, but if you think that's not enough, you might want to leave the installation to PRO.
View detail
Fits: BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW R1250GS Adventure, BMW R1250GS, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled, BMW F900GS, BMW F850GS, BMW F800GS, BMW F800GS, BMW F800GS, BMW F750GS, BMW F700GS, BMW F700GS
Slightly quirky in installation
OEMPannier installed on Pannier for R1250GS.
TorqueT20 Driver was required for installation of this product.
The exterior fixing screws of the OEM Pannier are removed and replaced with the screws that come with the product, but since the OEM exterior fixing screws are removed, the exterior will float as it peels off. It is very easy to manage small items and documents just by having Net in the Pannier.
View detail
Fits: HARLEY-DAVIDSON Pan America 1250, HARLEY-DAVIDSON Pan America 1250 Special
Easy installation
Installation is super easy, just snap it on from the front of the Monitor.
The effect is to block direct sunlight, making it easier to see the Meter.
View detail
Fits: BMW RnineT Urban G/S, BMW RnineT Scrambler, BMW RnineT Racer, BMW RnineT Pure, BMW RnineT, BMW RnineT /5
It would be unstable.
I can't flatten myself on the ground. View detail
Fits: BMW RnineT, BMW RnineT, BMW K1600 Grand America, BMW K1600B, BMW K1600B, BMW RnineT /5, BMW RnineT Pure, BMW RnineT Scrambler, BMW RnineT Urban G/S
Good for those who want to get up a little more.
Purchased to raise the riding position a little.
Installation isn't hard if you have the right tools.
You should consider how to retain the temporarily removed Handlebar.
Personally, I think a forward lean is necessary for riding posture, and I'm fine with this.
I don't think it will satisfy those who want to wake up their bodies anyway.
View detail
Fits: BMW R1250RT, BMW R1250GS, BMW R1250GS Adventure, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Liquid Cooling, BMW R1200GS LC Adventure water-cooled
Make riding more comfortable
My motorcycle is a BMW R1250GS. I feel a little tired after riding this bike for a long time, so I bought this Wunderlich handle heightening kit on webike. It can increase the height by 40mm, so that my arms can be bent and longer Time riding will not be so sore, and the overall workmanship is exquisite. I am very satisfied with this shopping. -------------------------------------------------- -------- My motorcycle is BMW R1250GS. I will feel a little tired in this bike for a long time, so I bought this Wunderlich handle high -handed kit on Webike. Time will not be so sour, the overall workmanship is also exquisite, and I am very satisfied with this shopping. Powered by Google Translator View detail
Fits: BMW S1000R, BMW S1000XR, BMW S1000R, BMW S1000XR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000RR, BMW S1000R, BMW RnineT, BMW R1200RT, BMW RnineT, BMW R1200RT, BMW R1200R, BMW R1200R, BMW R1200GS, BMW R1200GS, BMW R1200GS, BMW K1200GT
Used for R ninet Racer
I bought this one because I use Wonderlich's Magnet Drain Bolt.
Batch
View detail
Fits: BMW RnineT, BMW RnineT Scrambler, BMW RnineT Urban G/S, BMW RnineT Pure, BMW RnineT
Fit feeling is okay I guess.
RnineT Pure is now a Fender Eliminator, and the Japan License Plate goes on it with no problem.
The English version of the Instruction Manual (mostly photo explanations) makes installation easy.
However, the quality and texture of the joints with the RearLamp are not quite right, so I would rate the quality and feel of the product as dry.
View detail