Reviews
Let's see if this will get us through this winter!
Since I have HandlebarUp, how about the Point that prevents wind? View detail
Careful positioning and pasting
Tank Pad and Side pad are Quantities:Set and comfortable design that matches the car body.
This is a clear type that does not choose the color of the car body, but if you are not confident that you can stick it so that no air can get in, please use Material:It is safer to choose a with color type such as Carbon Style.
I messed up the position of the side pad, and the area near the tight curl at the bottom of the tank started to float afterwards.
I think I'm just not very good at it, so as long as I don't make mistakes in positioning, I should be able to apply it without any problems.
I like the product so much that I am thinking of buying it again for a second chance.
View detail
Hand guard for Rebel 1100
Installed on Rebel 1100 for wind protection in winter.
The type is fixed at two points, the handlebar end and the mirror, so there is almost no shaking due to wind pressure even when running at high speeds.
It may be an individual difference since it is an overseas product, but if no tension is applied, it will be slightly forward and down against the grips.
When installing, since it is somewhat flexible, I temporarily tightened it in two places and fine-tuned the handlebar end side first before tightening it again.
The width of the handlebar after installation is about 3~4cm, which may be due to the fact that the plastic molding is shared with other models, and the extension attached to the end of the handlebar is about 3~4cm.:Pair (for Left and Right) Together, the overall Handlebar width will be about 6~8cm wider.
The windproofing effect is not bad at all. It is a world of difference from the condition without it.
However, the distance from the Grip to the Guard is longer, so the windproof effect is not as good as it could be. As the name suggests, the original purpose of the product is to provide sufficient Clearance in the event of a collision. "Hand guard." I think it is a good idea. Especially for DCT cars, the Left Side will be very scuffed because there is no clutch lever.
Personally, I like the look of the handlebar because it feels more integrated with the handlebar than the Mirror co-tightened product.
View detail
It's okay
OEM Mirror seems to have no problem in terms of Clearance, but in my case, it's like a Limit is attached. View detail
Fits: SUZUKI SV400, SUZUKI SV650, SUZUKI INAZUMA400, SUZUKI INAZUMA1200, SUZUKI GSX-R600, SUZUKI GSX-R750, SUZUKI GSX-R1000, SUZUKI TL1000R, SUZUKI TL1000S, SUZUKI GS1200SS, SUZUKI Bandit1200, SUZUKI GSX1300R HAYABUSA, SUZUKI GSX1400
After all, if you don't buy a proper Manufacturer, it will peel off!
I had to repurchase the Mad Max? because it was no longer useful!
First of all, the cheap tank capSeal peels off easily. The reason is that the outside of the cap is wavy like GizaGiza or DanDan. The reason is that the outside of the cap is wavy, so unless the cap is made by a manufacturer that uses proper double-sided tape, the adhesive is weak and does not stick at all. The worst part is that the shape is slightly different, so the bolt position is gapped. (e.g. Mad Max)
This product from ODAX has no problems with both adhesion and shape!
But what's disappointing is that it's not Material at all.:It doesn't look like Carbon Style. A little more Material:I wanted to reproduce Carbon Style.
But it sticks firmly and the shape is Exactly!
View detail
I can understand Carbon, but it's pricey!
We chose this Rear Fender because we wanted to use the OEM Chain Cover as is rather than the Chain Cover integrated Rear Fender.
The shape and fittings are good! I was able to properly mount it without any modification. However, it is heavy because it is made of impact-resistant material? It is heavy because it is made of impact-resistant material and not FRP. But it is thick and well made.
Chain CoverThe price is high for another Rear Fender.
I chose this Rear Fender because I was going to paint it White anyway, but if you prefer Carbon, you might as well go with Carbon at this price.
View detail
Odax meter
Nice to have more kmh..unlocked the speed cut..but the instructions on japan..it could be easy in english..a very good product..thanksAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together: Difficulty of installation: use of youtubers search for odax el meter for kawadaeg Cost performance and comparison with other products: only this found on the web About shipping and packaging: nice packaging very secure.. Any concerns, cautions, or advice when purchasing: trusted seller View detail
honestly speaking, I'm not happy.
There was no other design that I liked, so I purchased it by process of elimination, but it was difficult to install.
I went to the trouble of translating the instruction manual (there was a supplement in the instruction manual that asked for input here, but I couldn't install it in any way, so I installed it in a different way.
I am disappointed that they are selling at this price point with the quality of the processing premise.
I do not recommend purchasing this product if you are looking for easy installation.
The holes in the bracket were too small to begin with, and the rubber was so tight that it was deformed when the well nut was passed through. I decided that it would be impossible, so I installed it without putting the Screen through.
Rubber is quite crushed, so it seems to deteriorate quickly ^^.
View detail
Disappointment
[How is it used?
I wanted to do something about the mud splatter on the Rear suspension.
Was the one you received as per Image?
Some things are hard to tell from the pictures.
Was the installation difficult?
As a beginner, it was difficult (there is quite a bit of distortion in the product) and we asked PRO to help us.
How was your experience with it?
Since there is a gap between the inner fender and the pillar next to the front of the suspension, dirt does not stick to the suspension as much as expected, but dirt will eventually fly out through the gap.
[Included Parts:were they on?
It was all there.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
T-Racer9gt
The design is great. It changes the atmosphere and looks awesome. View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA
ODAX Daylight Kit
It is ideal for Touring. It is easy to see from quite a distance. The installation was a bit odd for Large, since I also installed the ON-OFFSwitch and Relay, so it was a bit odd for an amateur. View detail
ODAXBack fog
I like the way it looks! View detail
Not as long as a Long.
I ran with it on properly without thinking about the angle, but it still worked.
I think it would be even more effective in a more upright position.
Light smoke seems a bit thin.
But with Dark smoke, it seems too thick.
View detail
Fits: SUZUKI GSX-R1000, SUZUKI GSX-R1000R, SUZUKI GSX-R125, SUZUKI GSX-S1000, SUZUKI GSX-S1000F, SUZUKI GSX-S125, SUZUKI GSX-S750, SUZUKI KATANA, SUZUKI SV650, SUZUKI SV650X, SUZUKI V-Strom650, SUZUKI V-Strom1000
The price isn't much different than the odd Chinese product, and this is fine.
Material bought at random on Amazon.:I had been using Carbon Style for 1 year and 2 months with 14,000km and it had lost its luster and cracked a long time ago, so I replaced it with a new one.
I really wanted SPEEDRA, but I got a call that the delivery date was delayed, so I changed to ODAX.
There was nothing strange and no Gap.
The new texture is still nice. how long will the ODAX last, the answer will be next year.
View detail
fender
It was fitted to avoid mud splashes on the Rear.
The RC79 was installed on the RC60, so some modification was necessary, but it was attached in 30 minutes.
I think mud splashing has also decreased somewhat.
View detail
[Color] Smoke is good!
The well nut attached to the OEMScreen does not fit in the small hole in the screen, and the hole must be widened to a large size with a file.
Loved the look of it.
[Color] Smoke is matched with Black Body.
Windproofing looks almost as good as NORMAL.
View detail
Effective
Purchased to keep dirt out of Engine and Titaniumium exhaust pipe.
This product is for JC92, but it could be installed on JC75 as well. I didn't want to drill holes in the Fender, so I used Ultra Strong Double-Sided Tape.
It also prevents the exhaust pipe from burning unevenly.
View detail
customization
If I put Guard on it, it will not work without machining. View detail
Fits: YAMAHA TZR250, YAMAHA FZS600, YAMAHA YZF1000R, YAMAHA YZF-R1, YAMAHA TZR250, YAMAHA TZR250, YAMAHA XJR400, YAMAHA XJR1200, YAMAHA TRX850, YAMAHA TZR125, YAMAHA RZ250R, YAMAHA R1-Z, YAMAHA FJ1200, YAMAHA FZR250R
To hide dirt on old Cap.
[How is it used?
I usually don't like to put anything on my tank caps, but I used it to cover up the stains on the OEM tank caps I got because I just couldn't get them off.
TZr250R (3XV) To be honest, I was fine with this brand's pad, but there didn't seem to be much other choice, so I went with this one.
Was the one you received as per Image?
Well, it can't be helped but plain weave Carbon "Wind" It is! I insist.
I thought the image of the product would be a little more subdued, but the pattern can be seen rather clearly.
Was the installation difficult?
Alignment with the cap bolt is somewhat troublesome, and no matter where it is aligned, it will be slightly off.
I think it is a good idea to put it up little by little without panicking.
How was your experience with it?
It's just a Pad, so I'm self-satisfied, but it's better than a dirty Cap.
There is no snag in opening and closing the Cap.
[Included Parts:were they on?
In addition to the Pad, the Small Clothing Cleaner is included.
[Was there anything that disappointed you?
It's a little too assertive, but well, it's a matter of taste.
【Review】
The design is quite assertive, but well, I was able to hide the dirtiness of the Cap.
If you are careful about the position of the tape, it will not get in the way when opening and closing the Cap.
It is for Tank caps for older vehicles, but I am glad it is still Lineup.
View detail
White meter
Purchased because I wanted a daytime White meter.
Installation Instruction Manual is included, of course, but the resolution of the photo images is too poor. (Lol) Hard on the eyes of the aged. (LOL)
I'd rather watch some YouTube and schmilletion.
View detail