Reviews
For Smartphone Holder
The Clamp is very useful for my SuCUB, because I have to tighten the Clamp to the Mirror and then attach the Smartphone Holder. If the Clamp is facing the wrong way, your head will be in a state of a ring of wisdom, so please check carefully before purchasing. View detail
For those who want to protect the plastic part of the helmet in...
I don't know if it's a fad or a cost-cutting measure, but the ADV is not equipped with this kind of InnerPad, and I was very curious about it.
I thought the price was a little high, but I decided that it was a special part and I had no choice but to purchase it.
In the initial stage, the puka-puka does not seem to Fit slightly, but as it is used, it seems to fit in gradually, but it does not Fit completely.
View detail
I am satisfied.
The clutch wire, which I had been feeling was getting heavier, finally snapped while I was on the road. I took a first aid measure, but the length and material did not feel right, so I replaced it with a Mesh Type STD.
The replacement itself was very easy and light to operate.
From my own experience, I recommend early replacement.
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
Satisfied considering the price.
[How is it used?
I bought this to replace a Grip that had been falling apart since purchase.
The vehicle itself is still in Restore, but my hands were getting black every time I touched the Grip, so I decided to use this inexpensive product for now.
Was the one you received as per Image?
As you can see in the photo, it is only packaged in a Vinyl bag, but this is sufficient for Net mail order sales.
Was the installation difficult?
The work of replacing the grip itself is not particularly noteworthy compared to other grips.
If I may say so, I felt that the Throttle side was slightly looser than dominoGripetc.
Grip bond is used in conjunction with Grip bond, so there is no possibility of exiting.
How was your experience with it?
It is still before driving on public roads, but I am still a little concerned about the floating with the Throttle cone on the Throttle side.
Wiring might solve the problem, but I don't have it on hand, so I'll give up.
Well, I am satisfied with the price.
[Included Parts:were they on?
This is the only product. Grip bondetc. must be prepared separately.
[Was there anything that disappointed you?
Well, is this how it is? I think.
I am satisfied with the Fit of the Clutch Side, although the Throttle side is a bit of an issue.
【Review】
Although there may be some vehicle compatibility, the Throttle side is somewhat uncomfortable.
The price of the product is probably fair, but considering the price, it is probably acceptable.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
Fluffy feeling is good
Used on XG250 TRICKER, replaced OEM after less than 20 years of use.
This was my first Grip replacement job, but it went easily.
The firmer grip is more comfortable than OEM.
I felt that it was not as effective in reducing vibration as I expected.
View detail
Fits: KAWASAKI GPZ250R, HONDA CB500F, HONDA PCX150, KAWASAKI Z250FT, YAMAHA MAJESTY250(ALL MODEL), YAMAHA MAJESTY250C(ALL MODEL), YAMAHA FAZER(ALL MODEL), YAMAHA TREET(ALL MODEL), YAMAHA DIVERSION(ALL MODEL), YAMAHA SEROW(ALL MODEL), YAMAHA GRAND MAJESTY(ALL MODEL), YAMAHA Axis(ALL MODEL), YAMAHA Zr(ALL MODEL), YAMAHA YZF750R(ALL MODEL), YAMAHA YZF-R17(ALL MODEL), YAMAHA V-MAX(ALL MODEL), YAMAHA T-MAX(ALL MODEL), YAMAHA FZX250(ALL MODEL), YAMAHA FZr500(ALL MODEL), YAMAHA DT200(ALL MODEL)
How nice
It is a little thicker than I like. The length is short and it is easy to control the AxelControl.
The name is included for installation.
View detail
Fits: HONDA CB750F, HONDA CB750F, HONDA CB750F, HONDA CB750F
It purchases to CB750F INTEGRA. Since the clutch wire was old, it decided to exchange. Compared with the new article, the removed old wire deteriorated fairly and was hard. Probably, it was almost a life, since it had used this and that for te
It purchases to CB750F INTEGRA.
Since the clutch wire was old, it decided to exchange.
Compared with the new article, the removed old wire deteriorated fairly and was hard.
Probably, it was almost a life, since it had used this and that for ten years or more, although used lubricating briskly.
The operation became light clearly after exchange.
When not changing the clutch wire what year, or when a discontinued car is purchased in medieval times, aren't they the components which may consider exchange first?
I think that it is a portion which operativity improves but certainly cheaply.
It seems that in addition, such a thing cannot be found and it can use for this product although it has written clearly A bol d'or integra is excluded in the package.
It was the completely same actually die length as my integra being pure, and even if checked with the parts list, the bol d'or was also the same parts number.
View detail
Fits: KAWASAKI ZRX400 2, KAWASAKI ZRX400, KAWASAKI ZEPHYR400χ, KAWASAKI ZEPHYR400, KAWASAKI ZRX400II, KAWASAKI ZEPHYRX
Good cost performance and tethering
I don't do Tandem, but I bought it for its looks.
It is as I had expected, the texture is good and looks good.
Also, I won't know about the rusting until I use it for a while.
For installation, use a special bolt and collar to attach to the Loading Hook bolt location.
It was easy to install without any problems.
The cost performance is good and I am satisfied with it.
View detail
Fits: その他 For medium to large displacement millimeter (22.2mm) handles only.
RossiGrip?
[How is it used?
I changed it for Enduro race with SEROW225.
How was your experience with it?
The RossiGrip is famous in the on road world (although it's a Honda OEM grip).
Is it the same shape as It is the Grip of the laugh.
Because of the price, I feel like I could replace it every month.
How did it compare to other products?
The real thing still looks cheap, but it looks like RossiGrip itself lol.
I don't think it's that bad, but it's pretty soft.
[Points to note]
It's cheap, so don't hesitate to use it and replace it.
View detail
Fits: HONDA GYROUP, HONDA GYRO CANOPY, HONDA GORILLA, HONDA ELSINORE 250(MT250), HONDA APE TypeD, HONDA XR50 MOTARD, HONDA TL125IHATOVO(TL125S), HONDA XR400 Motard, HONDA XR250MOTARD, HONDA XR250, HONDA XR230MOTARD, HONDA XR100MOTARD, HONDA XR230, HONDA XLX250, HONDA XLR250, HONDA XL500, HONDA XLR250, HONDA XL400R, HONDA XL250, HONDA XL125
If you are looking for a slightly thicker Grip, this is the one for you!
The design is very good and I like it. one pointYou can choose the color of your motorcycle.
To install, simply remove the original Grip, put on the Bond, spray with Parts cleaner, and screw in. It is not too hard or too soft, so you can install it smoothly.
The reason I chose this Grip was because my previous Grip sometimes made my hands numb from the vibration, so I decided to replace it to try it out. As for the impression that I tried to use it, there is no Direct feeling in Axel from the thickness. It is a mellow feeling. Because the grip is hard, it is not a strange feeling, but there was a little uncomfortable feeling at first. The vibration to the hand was about the same. If you are looking for a slightly thicker Grip, I recommend it.
View detail
Ideal for carrying
There was a person who was touring before and the wire broke, and there was a person who returned on the way with no clutch.
I was on my way home from work when my clutch wire broke and I had to go home with no clutch.
So, I decided to carry Inner wireKit for emergency use.
Recently, there are a lot of kinds in the shop, and I decided to carry it in the direction that I protect myself with Spare because it seems to be the direction to reduce the stock.
View detail
Fits: SUZUKI GSX400, YAMAHA XT250, YAMAHA XJ400, YAMAHA XJ400, SUZUKI RG80, SUZUKI RG80, SUZUKI RG400, SUZUKI RG200, SUZUKI GSX250S Katana, SUZUKI GSX600, SUZUKI GS550, KAWASAKI Z400 (KZ), KAWASAKI Z1000 MkII, HONDA NSR150, HONDA NSR150, HONDA NS250, HONDA GB500, HONDA GB400, HONDA CX500, HONDA CX400
I like the way it's biting.
Used for XELVIS.
Universalism is high because of the general inner diameter.
The design is not often seen, but it is thick and soft and comfortable to grip.
It's also non-slip, so you won't get tired even if you hold it for a long time.
If you like the design, you should buy it.
View detail
As long as it's in place, it's fine.
It's in the reviews of others. "Adjust comes loose on the road. It's not likely to come loose if it's tightened firmly in either direction. I've been walking about 100km in the mountains, but it didn't loosen up. It is not loose if you tighten it firmly to either tighten or shrink it according to the shape of Handlebar because I was worried about it. View detail
Fits: YAMAHA MT-09 14-16, YAMAHA XSR900 14-16, YAMAHA XSR900, YAMAHA MT-09
There's nothing wrong with that
I replaced the XSR900's Handlebar with a 5?Up and 5?Long one It is using without any problem Unknown number View detail
Fits: YAMAHA SR250(ALL MODEL), YAMAHA SR125(ALL MODEL), YAMAHA SR400(ALL MODEL), YAMAHA TW200(ALL MODEL), YAMAHA TW125(ALL MODEL), YAMAHA TT250R Raid(ALL MODEL), YAMAHA TT-R250(ALL MODEL), YAMAHA TDR50(ALL MODEL), YAMAHA TDR250(ALL MODEL), YAMAHA TDR125(ALL MODEL), YAMAHA TDM900(ALL MODEL), YAMAHA TDM850(ALL MODEL), YAMAHA SRX250(ALL MODEL), YAMAHA SRV250(ALL MODEL), YAMAHA TW200E(ALL MODEL), YAMAHA TW225(ALL MODEL), YAMAHA TZr250R(ALL MODEL), YAMAHA VINO(ALL MODEL), YAMAHA WR250R(ALL MODEL), YAMAHA VOX(ALL MODEL)
For Japan Model 5 CYGNUS
The downside is that it's a bit long and needs to be cut
If we had a choice of lengths..
The difference in thickness is obvious as the KITACO RACING GRIP was replaced by the KITACO RACING GRIP Absorption seems to have increased considerably
View detail
I'm not happy with the angle
The Hose itself is fine
It's safer than cheap, no-name manufacturer's mesh hose
It was flexible and easy to handle
I just want One Side to be 90-degrees twisted
It has to be a MASTER with a positive Banjo attachment type
You can't put it on without twisting it a little too hard
That's a shame
View detail
grip
I like the feel of the Sponge's unique grip, and it absorbs vibrations and shocks!
Because the Grip is a bit tough, when you install it on a SmallScooter etc The Grip may look like it's floating
I wore it on American before and it looked and felt perfect!
It sucks when it rains
View detail
Soft texture
We're replacing the normal grip!
The normal grip was hard and thin
This Grip has just the right amount of Cushion to make the grip more comfortable!
The grip width is thicker and easier to grip in my opinion
It was harder to install and remove than the Rubber
View detail
Long and simple Bar End
I bought this because I like the Bar End of Fuji Horizontal Type?
I also used Heavy weight from a famous manufacturer, but this one is more I think it's simpler and more suited to the SR400
It's well built and feels Large sturdy even if it rubs at low speeds
Since the weight is about 180g, it is not as effective as the Heavy weight in reducing vibration
View detail
สวยงามวัสดุดูดีเหมาะสมกับราคา
สวยงามวัสดุดูดีเหมาะสมกับราคาผิวสัมผัสนุ่มสบายมือ สั่งของ 20/1/19 ได้รับ 31/1/19 View detail