Reviews
Extended OEM Front Fender length
Water and mud splashes are reduced and feet are less likely to get wet.
After driving on a forest road, mud was accumulating and hardening near the cooling fan. After installation, the mud splashing was reduced and the mud no longer splashed onto the cooling fan.
Double-sided Tape and Clip for mounting in quantity:It comes as a set. I drilled a hole in the Fender and installed the Clip only, without double-sided tape for easy removal.
View detail
Fits: YAMAHA Tracer 9, YAMAHA Tracer 9 GT, YAMAHA XSR900
It's effective, but...
The Rear Fender on the 2022 XSR900 is too Short.
Dirt, as well as bounced-up Small stones, etc., will hit the Suspension.
After driving, stones and sand accumulated around the Swing Arm and Suspension.
This product will improve the situation considerably.
Rear tire must be removed for installation.
It is a Large strange task in its own way.
And the price is too high.
I can't help but wonder if this is more than $10,000.
View detail
Fits: HONDA CBR1000RR FIREBLADE
I'm satisfied
Bubbles were left on the bumps at the right end. I would have liked more clear instructions on how to work with it.
I am considering repurchasing.
View detail
Fitting is perfect.
Purchased because the Rear suspension gets very dirty when driving on wet roads.
Instruction Manual was easy to understand with translation (please type here).
I think Right Side is impossible without removing Silencer.
The fitting is perfect, and it is covered to the rear suspension area.
Very satisfied with the drastic reduction of dirt on wet roads.
View detail
Fits: KAWASAKI Ninja H2 SX, KAWASAKI ZX10R, KAWASAKI ZX-10RR
Note the placement of the double-sided tape.
Dirt comes up to the Radiator and Stem, so it is installed.
It is more troublesome than expected because it is necessary to remove the Wheel to remove the Fender.
It fits perfectly without Tape, so if Tape is applied to the sides, it will not go all the way in due to the thickness and adhesiveness of the Tape.
So, I only put it on the front part, but it can be fixed quite firmly.
However, since the motorcycle runs 300km, the included Rivet must be used and a 4mm hole must be drilled just in case.
The black color on the green-light Fender is almost conspicuous, but since it is located in the back of the house, it is hardly noticeable.
I have used it on other cars and the spray stops around the bottom of the Radiator, which makes washing the car easier.
View detail
Fits: KAWASAKI Z900RS, KAWASAKI Z650RS
Wound prevention
I had a hard time attaching it, but I managed to do so. View detail
Fits: HONDA NC750S, HONDA NC750X, HONDA Integra
Difficult to apply without air bubbles.
It is difficult to position the meter and to apply it well without air bubbles.:1pc. Fail and waste anymoreQuantity:1pc. was somewhat Gapped but not after, so the position was compromised. Considering that, this pricing is not very satisfactory. it might be enough to cut out and make it on the Universal Protective Seat with my own pattern paper. View detail
Fits: TRIUMPH Tiger 900 GT Pro, TRIUMPH Tiger 900, TRIUMPH Tiger 900 GT, TRIUMPH Tiger 900 GT Low, TRIUMPH Tiger 850 Sport
A little more texture up would be nice.
The body is very easy to assemble and install, and although the texture of the body does not look cheap for the amount of gold, the bracket is designed to prevent gold fatigue. (?) The "Fender" is cut out of the "Fender" and the attention to detail can be seen in the cutouts. We took a lot of time and effort to tighten the screws so that the gap with the Fender on the body side is even etc. Since this is an area that constantly vibrates while driving, we recommend that you follow the instructions in the Instruction Manual and use a screw locker.
The installation extends the Fender by 25 cm, which is effective.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09 SP, YAMAHA MT-09
Care must be taken when attaching the protective film to the Signal screen on both SIDES.
There is also a pasting Instruction Manual, and the product is relatively meticulous.
The paste itself can be applied with a feeling similar to that of a protective film on a cell phone.
The process itself is simple.
However, the Instruction Manual for the product stated This product is about 2-3mm smaller than the screen size. and take the wording at face value will fail.
Particular attention should be paid to the long, narrow sections on both SIDE.
If the film is applied in advance and placed 2-3mm away from the edge as described in the Instruction Manual, the protective film on the main screen side will float because the space between the two SIDE screens and the main screen is like a slope.
It seems better to stick both SIDEs just a little bit away from the edge.
If you pay attention to the above notes when pasting, I think it will clear up nicely.
View detail
Installation is easy
Installation is easy, as long as you follow the instruction manual. View detail
To avoid contamination from mud splashes.
The Fender is now long enough that there seems to be a mud splash effect.
It doesn't look that noticeable.
If you can remove the front tire and work on it, I think you will have no trouble installing it. As mentioned in other people's impressions, if you can do it for a few thousand yen, it would be better to ask a shop to do it for you.
Why ask for Shop?
1.If you only remove the Fender and work on it, it is quite difficult to put it back together. (I dropped the Fender before tightening it with Screw and scratched it, though it is now polished with Compound and not visible from a distance.)
2.It says to drill a hole in the Fender and install the pin that comes with it, but I decided not to do that because the material of the OEM Fender is steel plate and it would be difficult to drill a hole in the curved part with a drill, and also because I thought it would look uncomfortable. I would recommend shop installation for this reason.
Extender Fender is now installed using only the double-sided tape provided.
I gave it a 4 because of the difficulty of installation and the fact that I haven't actually driven in the rain. I gave it a 4 because of the difficulty of installation and the fact that I have not actually driven in the rain.
View detail
Fits: HONDA NT1100, HONDA CRF1100L AfricaTwin
Large screen size is not just Film
[How is it used?
Introduced to protect expensive Touch panel.
Was the one you received as per Image?
It is slightly smaller than the Large size on the screen.
Was the installation difficult?
It was somewhat difficult for a beginner like me.
Especially the positioning and dusting.
How was your experience with it?
The screen is less reflective, but it does not completely reduce reflections. (I guess that's to be expected.)
[Included Parts:were they on?
AlcoholWipe, Squeegee, Dust Removal Seal, Instruction Manual, and everything else that usually comes with the purchase of a protective film for smartphones.
[Was there anything that disappointed you?
As stated in the title, it is a little small for the object (screen) to which it is pasted.
Point and hang of installation
Do not try to install it using only the accessories, but use a solution of 500?water and a few drops of neutral detergent in a misting sprayer to apply it.
Dust is difficult to get into and easy to position.
Youtube, etc. How to apply protective film I think it would be better to search for a place to start with and then try to imitate it.
[Notes]
As I have mentioned many times, the film is a little small for the screen.
(If the film is larger than the object to be pasted, the edge of the film will float. In short, it is a matter of precision.)
Note that this is mentioned in the Instruction Manual, but not in Webike's product description.
[Opinions and requests to Manufacturer
Please improve the accuracy of FilmCut and come out with a product that can cover the entire screen.
View detail
Fits: SUZUKI Katana, SUZUKI GSX-S950, SUZUKI GSX-S1000, SUZUKI GSX-R1000R L7
[Color] Clear Protection Seat
It was easy to install, just spray water with a misting spray and use the included brush to release air bubbles. View detail
Fits: YAMAHA MT-07
No problems so far.
I installed it at the same time I took delivery of my car, and even if some small bubbles remain, they will naturally disappear after a few days, so there is no loss in buying it.
Even I, who am not very good at pasting, was able to paste it normally, so I recommend it!
Two types of filmQuantity:Each package contains 1 pc. so even if you make a mistake, Large is sturdy.
View detail
Fits: SUZUKI GSX-S 1000 GT, SUZUKI GSX-S 1000 FA, SUZUKI GSX-S 1000, SUZUKI GSX-S 1000 GX
Without it, water will splash on your back.
It was installed on a 2017 GSX-S1000.
When installing the product, remove the Axle Shaft and reverse the Nut side. Also, the rear axle block on the product installation side is no longer necessary.
If you are not confident about doing the installation yourself, it is better to have a Motorcycle shop do it for you.
The Fender Eliminator causes a lot of splashing, but I am satisfied that this product eliminates a lot of the splashing.
Visual also differentiated itself from the others and made Parenthesis look good.
View detail
Fits: HONDA XL750 Transalp, HONDA X-ADV, HONDA FORZA 750, HONDA CB750 Hornet, HONDA CB1000R
Screen protect film for CB1000R (2022)
98% of accuracy fit but not enough sticky... it just easy to remove by wind or hazardrus... but the visual is fine it has two type film include. one is matt (what i used) and another is Glossy shine if i use the glossy film, the street light or sunny day the lights will punch your eyes View detail
Fits: SUZUKI Hayabusa
During degreasing
I wiped it with the included cloth to degrease it and it had minor scratches.
I shouldn't have put it on.
If you touch the top surface of the adhesive village, fingerprints will appear.
View detail
Fits: HONDA CBR1000RR-R FIREBLADE
Meter panelProtectionFilm
Meter panel on cbr1000rrr was added because it is easily scratched.
The installation was easy since it is a dedicated product.
Translation (Instruction Manual is also included.
View detail
Fits: SUZUKI Hayabusa
Wound Prevention
I put it on to prevent scratches on Meter.
It was already attached when the car was delivered, so it is not on the road without being attached.
There is no foggy feeling, and the transparency is so high that it is easy to forget that it is there at all.
Also, two sheets are included in the package, so there is no need to worry about reupholstering or making mistakes.
However, it would be better to remove the Meter from the car body when attaching it, and to do so with a Single Body.
View detail
Mudguard on bmw r1200r
Installation is a simple process of attaching with the included double-sided tape.
Effectiveness.
Small stones and mud rolled up by Front are reduced.
If only it were a little longer? 5.
View detail