Reviews
To relieve the anxiety of a short break.
I bought this product because the CBR1000RR SP sc77 does not have a Helmet holder in OEM and there is no Screw hole to install a Type product that mounts on the Frame.
I used to hook it up to Mirror when I took a break at a touring destination, but it was half the fun with the fear of theft.
After installing this one, I was able to leave the vehicle body with some degree of peace of mind, so I think it is actually quite cost-effective as a cost-effective solution.
Installation is not particularly difficult as long as the size of the car body is carefully checked.
If I had one request, I would have liked the key to be 4-digit instead of 3-digit. I thought that if you leave for a long time for meals, etc., it might try all patterns and be unlocked.
View detail
It peels right off.
For Z8,,
2023/03/20 Purchased a Blue Type of this
2023/09/12 Red Buy this
I didn't want to change the color.
Mirror coating on the surface peels off quickly.
Coating to repel water is still peeling off easily, even the mirror part is peeling off.
At first it peeled off when I wiped it with SurLuster0, which is self-inflicted because the warning on this product says to use water only and apply Towel lightly....
(Mirror shield on Z7 didn't peel no matter how much I scrubbed it, so ......)
I was careful with the new Redi Type, but even with very careful care, it was peeling.
This is a RECOMMENDATION for those who can afford to replace it in six months.
The attached image is fogged up with breath for clarity.
View detail
Looks as good as expected
Buy Blue in Semi-smokeBase.
The color of the look is beautiful, just as I expected.
I wore it and actually saw it running, and the visibility [Color] Clear and no problems.
Mirror coating peels right off." I have not experienced such a problem with the one I purchased, so far.
View detail
Second, ◎ on ThirdHelmet
[Glasses etc. The head is SHOEIx-twelve L Size].
This is my first ShieldJet. It's comfortable, no shaking, wide field of view, and no wind in my face! I used to use a half cap for a little riding, but I don't need it anymore.
Once you get used to it, you can put on and take off the helmet while wearing Glasses. Loose around the ear Space may be working. Perhaps that's why head circumference (Around the forehead) and the chin area seemed tight. Size is Small. I can understand the opinion that. … or maybe I should have tried wearing an XL. (Sweat)
I did not feel any discomfort from the wind from the Shield, including the sound. I felt coolness around my temples, but there was a buzzing sound instead. I tried driving another motorcycle at nearly 100km/h, but there was no change in the loudness.
Shield is virtually fog-free! If you drive out a bit, I can say that none of them are. In winter (It was a warm day.) This impressed me.
The quality of the paint, buckle, and shield opening and closing is generally high, and the level of satisfaction is high. However, when you wear it, the well feeling when you hold it is not like a certain Top model, and you feel the price range. Quality and texture The 5 star rating of "5" is a cosmetic evaluation.
View detail
SlimBase
Slim and solid. View detail
Not bad, but ….
I put it on SHOEI's GramStar.
I was going to replace it with Mirror shield, but when something that looked white was released, I bought it.
It is a Pin lock modoki, but it is a mysterious product with color.
As you can see in the image, it does indeed add color, and the view you see is a Yellow color.
At first I wasn't sure about this, but once I got used to it, it was easy to see at night.
It was unfortunate that it was more transparent from the outside than I had expected.
Also, the installation was moderately Large strange. I found an official video of the installation, but I could not imitate it because it seemed that they put so much effort on the Level. I could not imitate it.
Large was strange depending on the direction of warping, but I managed it.
View detail
Very good product
I like it because it is Design cleaner than other companies' products.
Installation was easy and the feel is very good.
Spare key is also included.
The bolt is also a stainless steel bolt.
View detail
Lightweight, cute Design, cute box.
I like this helmet because it is lightweight and has a cute Snoopy design. I like how easy it is to lock and release the chinstrap. The box design is also cute, so it makes an excellent present. View detail
Fits: DUCATI MONSTER1100/S, DUCATI MONSTER796, DUCATI MONSTER696, DUCATI MONSTER796, DUCATI MONSTER696
Might be easier to use.
It can be said that it is easy to hook because of its large opening, but it is difficult to remove it without using both hands.
It happens to be the place where the Battery Charging Cable is out, so you should think carefully before attaching it.
View detail
Fit feeling is good for a foreign-made Helmet.
Many foreign-made helmets, even AsianFit, are narrow for Westerners, and when worn, there is often a feeling of pressure from the SIDE and an impact on the ear area when putting on and taking off.
I feel a little pressure around Teak, but I don't mind it because I expect it will wear out after use.
However, the cap appears to be slightly larger in size, so from a third-party viewpoint, the silhouette is a bit too big for the head.
The paint job and interior texture are good, and the design resembles Armour's Helmet, which appears in the famous game "H◯LO.
The PeakVisor is even more similar, but this Visor is difficult to use. It may be a matter of getting used to it, but when I tried to close the open Shield, I accidentally picked up the Visor and couldn't close it. "What? It won't close!" This can be the case.
Shield also seems to be slightly distorted in the forward direction.
In addition, the Knob for opening and closing the Shield is located directly in front of the Shield and is small, making it difficult to pick up and operate depending on the Gloves.
Weight-wise, it is hard to judge since it is the first full-face, but looking at the Specifications, I think it is slightly heavier.
Considering the price and other factors, I think this is a well-made product overall.
View detail
Fits: Others , HONDA MONKEY125ThailandMODEL, HONDA MONKEY125, HONDA PCX160, SUZUKI GN125-2F, YAMAHA YB125SP, YAMAHA XTZ125, KAWASAKI KLX125, KAWASAKI D-TRACKER125, KAWASAKI Z125PRO, KAWASAKI KSR110PRO, KAWASAKI KSR110, YAMAHA XT250SEROW, HONDA CRF250L, HONDA CRF250RALLY, HONDA Dunk, HONDA MAGNA50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA APE100 TypeD
Nice little addition to my Monkey 125
I live in an urban area and wanted to keep my helmet locked with my bike although theft is not too common here. The stock helmet lock is located at an awkward spot that's too low and inconvenient for me - I had to try out this one. Installation is easy, product works as promised. View detail
Fits: Others , YAMAHA BWS 50, YAMAHA BWS125, YAMAHA MAJESTYS, HONDA ZOOMERX, HONDA PCX125, HONDA PCX125 E:HEV, HONDA PCX125 Hybrid, HONDA PCX150, HONDA PCX160, HONDA CROSSCUB110, HONDA glom, HONDA MONKEY125, HONDA CB125R, HONDA CBR125R, HONDA CB250R, KAWASAKI Z125-PRO, HONDA DAX125, HONDA CT125CT110 HUNTER CUB, HONDA CL250
For CL250
Side Back on CL250
Because it is installed
Master Cylinder in Kochira
Type's installation on the
Helmet holder.
View detail
Tighter than expected.
I usually use SHOEI'sSize as Spec.
I checked on the Net and it says to choose one size up, but two sizes up may be fine. Well, everyone's head shape is different, so this is just for reference!
View detail
Could not be used for X-ROAD II.
This is not Webig's fault, but we tried to install this on our X-ROAD II, but there was no space to insert it, so we could not install it.
The package says it is also compatible with II, but the product labeling is incorrect to begin with.
View detail
Cheap ordinary Jet helmet
I was originally using a HalfJet type from the same manufacturer for my moped (YamahaAPRIO, 60cc Bore up moped registration), but my ears get cold in winter, so I considered a Jet helmet for winter and looked for a Jet helmet with a simple, normal design. I was looking for a Jet helmet with a simple and ordinary design, and I bought it because it was inexpensive, looked just as I wanted, and was compatible with all Engine Displacement Volume.
The quality of the fine details is in line with the price, but PSC/SGMark is naturally included, and it has the minimum safety performance, so I think it is good for Level 2 mopeds.
Since the helmet is designed for full lung capacity, the shock absorber is thicker and the helmet may be slightly larger than that for the 125 and up.
The size of my head is 57cm, and I put the included sponge in 4 places all around the circumference as described in the instruction manual, and the level is just right or a little loose. 57-60cm means that the difference of 3cm is 0.48cm in terms of radius, and the sponge of the same thickness just fills the space between the two. Some people may feel it is a little loose. It is better to actually try it on, but it is difficult to do so, especially in rural areas where there are almost no stores that carry the actual product.
Unfortunately, unlike HalfJet, the Edge processing of the Shield is not as good as HalfJet, and is slightly sharp to the touch. It is not enough to cause injury, but it feels cheap.
Also, it has been less than a month since I purchased the Shield and I only use it on weekends and on a small shopping Level, but it makes a squeaking sound when opening and closing the Shield. I am going to try to Grease up the Shield.
I don't feel like the air duct is working nearly as well when I open and close it. (It doesn't get cold opening and closing it in the middle of winter, and I can't tell the difference)
The Logo called CROSS on the Front is a Sticker and can be easily peeled off.
Since it is not related to safety, I removed it and put my favorite Sticker (fishing related) on it and customize it in my own way.
The SGMark warranty expires in, I believe, 3 years for any Helmet, so considering that I would have to replace it in 3 years for that reason, I think this price is about realistic for a two-moped vehicle.
View detail
characteristic (of someone)
No human being is odorless.
Anything that is in close contact with the body will have body odor attached to it.
I bought it to maintain hygiene.
I think it is necessary in summer because of the large amount of sweat and sebum.
View detail
Fits: BMW R1200GS, BMW R1200GSAdventure, BMW R1250GS, BMW R1250GSAdventure
No need to worry about food while touring.
I used to hang my helmet on Mirror when I took a break during touring. I was worried that it might be stolen or fall off, but now I feel safe! However, I am worried about rust because the material is steel. It is easy to install and just fits. View detail
Fits: Others ASTRO-GX, Others RX-7X, Others ASTRAL-X, Others VECTOR-X, Others XD, Others RAPIDE-NEO
uncomfortable feeling
Anti-fog Film for ULOOK VAS-V Item No. : UL-01T01
Color; Dimmable For ASTRO-GX
OEM Pin Lock Seat (MVPin lock120) is not a problem. I was told that dimming is determined by the amount of UV light, but it is winter so I could not check.
View detail
Jam Jet helmet
The shipping and packaging was Smooth.
It is inexpensive but solid and the Size is also Exactly.
Design and Fit are also satisfactory!
I use it for commuting and it is sufficient!
View detail
Is good
Visibility is good day and night.
The wind is rather blowing.
The rain doesn't get in your eyes, but it does get you wet from the nose down.
I put it on instead of Sunglasses and it is fine.
If you want to protect it from wind and rain, it may not be enough.
View detail