Reviews
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
To put on the Grip heater
Prepared for Grip heater.
Used to omit OEMThrottle processing.
I spent a lot of time adjusting the Throttle play, so I may not have shortened the result (laughs).
View detail
Race ish atmosphere UP!
Replaced the paint that had been on the handlebar because the paint was peeling off. View detail
Installed on CB250R
I installed the one for Grom on my CB250R.
Being 10% High Solo, the amount of change is small, so it is not daunting or heavy.
It is easier because the amount of manipulation is reduced.
I have not tested it fully open, but when I straddle it and twist it, it seems to be Large sturdy without the Limit grip, although it is tough without re-gripping it if it is NORMAL.
View detail
Very Affordable Throttle Pipe when adding new grips for the Grom
About quality and texture: I am happy with the quality of super throttle pipe from Kitaco. Durable plastic housing with smooth surface which allows for easy installation of the new grips. About the feeling of use: With this product there is no need to attempt to reuse the Honda throttle pipe which makes the addition of new grips a breeze and with a shorter full throttle twist needed makes the Grom even more fun to ride. Products to buy together: Some new grips would also be desirable to purchase alongside the super throttle pipe as the Honda one will be extremely difficult to remove and they are much more comfortable grips available. Difficulty of installation: The process to install takes about one hour. The right bar end and the right side fairing need to be removed, the switch block needs to be opened and the cable tension needs to be loosened for the throttle pipe to be exchanged. Then reverse to steps to complete the install. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a quality made throttle pipe for a very affordable price and the best value when compared to the other brands. About shipping and packaging: Sea freight was my preferred method of shipping due to the lower cost but currently unavailable due to Japan Post. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: The suitable grip length for the Grom is 120mm when you are looking for options. View detail
Fun.
I got a taste of it on the Big scooter, so this time I put it on the Gen II Scooter.
I usually don't do full openings all at once, but I still wanted to eliminate the grip changeover.
High Solo is a necessity for a vehicle as small as a motorized Scooter~.
It's a lot easier to ride.
In the "Situation" column, we have marked "Touring", but you can adapt it to your preference from city driving to circuits.
The cosmetics are honestly bad… expensive… Mr. ACTIVE….
I am happy with it because I can enjoy it as a tune and it is not a loss considering that I can fine tune the amount of winding and play as I want.
By the way, it is Simple and Cool.
It will not be Waterproof. Maintenance may be required after rain.
Throttle Cable is large and sturdy if …M10×P1.25, even if it is not a dedicated product.
View detail
Used for hot grip
I used it to put a Grip heater on my Axis Treat, and when I tried to order the OEM Throttle cone
The grip comes in one piece, so an external DAYTONA hot grip is used.
I think this product will be useful to put on.
View detail
Fits: Others , HONDA APE 50, HONDA GORILLA, HONDA MONKEY
ใช้ชีวิตง่ายขึ้นเยอะเลย View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Good part
Put this on my msx125, feels much better, takes less rotation of the wrist to reach full throttle. Fitment is perfect and quality is as good as an oem part. View detail
Super Throttle Pipe from Kitaco
* About quality and texture, The throttle tube is made from a black plastic just like the Honda OEM one but with a different deign. * About the feeling of use, Definitaly a worthwhile product to install as I initally found the difference between the two quite noticable but over time it is now the new norm. Due to less rotation of the throttle required the power comes on faster and that is never a bad thing for a 125cc motorcycle. * Products to buy together, I would recommend also purchasing some new hand grips as the Honda OEM ones will be difficult to remove, Kijima have a great range here on Webike. * Difficulty of installation, Installation requires the tension to be released from the throttle cables, throttle housing opened up and bar end removed before you can remove and replace the throttle tube. The process was completed in 30 minutes with no difficultly. * Cost performance and comparison with other products, There are a total of three brands offering throttle tubes but only the one from Kitaco offers the higher throttle rate and is the cheapest of all to purchase. * About shipping and packaging, I am happy to wait 8 weeks on average for my parts to arrive in Sydney Australia via Webike's sea freight which comes with tracking and insurance so I know I'm covered in case something was to go wrong but with there outstanding bubble wrapping and boxing there have been no problems. * Any concerns, cautions, or advice when purchasing, I cannot see a reason why you would not add this product to your Grom. Use the product reviews to assist in making a decision on your purchase. View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
It is easier to turn Axel.
It was quick and easy to get to Top speed. View detail
Fits: HONDA APE 100, HONDA APE 100 TypeD, HONDA APE 50, HONDA APE TypeD, HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY, HONDA APE 50, HONDA BENLY50CD50, HONDA BENLY50CD50, HONDA DAX, HONDA MONKEY, HONDA SUPER CUB110, HONDA CL50, HONDA DAX, HONDA DAX70, HONDA XR100MOTARD, HONDA XR50 MOTARD
pc20
I bought it together while installing pc20 Carburettor on my friend ape100. The response is good and there is no shortage of use. It is a highly recommended product for normal response. If you have a big Carburettor installed, please buy it! ------------------------------------------------------------ -------- I bought the PC20 carburetter on my friend APE100. Powered by Google Translator View detail
THROTTLE VERY COOL
I ordered it to install Kawasaki W175SE, and waiting 3 week for recived it. It very cool product as my expected, material is cast aluminum as describe and chrome plating is good. View detail
good-looking
It is made by Active, so I am satisfied with the appearance and quality of the product.
It is thin and very slim, so it looks very customizable, and you can choose from a variety of colors. The performance is also perfect, and it is a high Solo.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Slightly quicker throttle action but a bit flimsy
The work required to swap this over isnt worth it in my opinion. I aslo notice i can lower the idle speed but putting pressure on the throttle. View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
SmallEngine Displacement VolumePower up is a man's romance lol.
SmallEngine Displacement VolumeIf you drive a car on a hill, you have to turn it, so you have to open the Axel a lot, don't you? It's fun to use SmallEngine Displacement Volume to turn the car around. By the way, Gixxer 150 for MONKEY125 can be installed without any modification. View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Cheap! And High Solo!
I bought this to save the time and effort of removing the OEM grips from the OEM Throttle and grinding out the bumps when installing the Grip heater. In case I need to go back to OEM, it's still Kan Tan.
When installing the ThrottleWire, you may need to remove the Leg shield to free the lower end of the ThrottleWire. I did this at the same time as installing the grip heater, so I had already removed the leg shield for wiring.
After the installation, I heard that it is 25% higher solo, but I didn't feel any particular change. However, if I use the same amount of control as before, the Axel will open up to Large fine-grained, which may reduce fuel efficiency a little?
No problem, as it is a fun ride.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
There is a BALI and it needs to be cut down.
The BALI is on the opposite (lower) side of the Thailand coil position on the wire and I can feel it catching just before full throttle.
If you shave BALI, it becomes Smooth.
View detail
untitled
Personally, I didn't feel the effect of the 10% High Solo conversion.
It's only a personal issue, so it literally depends on the individual.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
High Soloing
I changed the Grip and also Throttle.
Replaced. 20%Higher Solo
That's right, so I was wondering.
It's not that dramatic of a change.
Axel opening is a little easier.
The price is cheap, so I'm satisfied.
View detail
Fits: HONDA SUPER CUBC125, HONDA DAX125, HONDA SUPER CUBC125, HONDA MONKEY125, HONDA MONKEY125, HONDA CROSSCUB110, HONDA CROSSCUB110
Even more fun riding with the quick throttle
I ordered the Kitaco super throttle pipe as I was changing my handlebar setup and did not want to reuse the OEM Honda grips and I read that the grip is very difficult to remove from the original throttle tube. Very basic looking product at an extremely low cost. Releasing the tension off the throttle cables is required for installation and then adjusting them for correct operations is a must. I have to say I wish I had installed this product sooner as it seems to making riding the Honda Monkey 125 even more fun due to giving the motor more gas with the same twist of the throttle I would have given it before. View detail