Reviews
Caution before applying!
I purchased the largest size Ninja letters to put on my helmet.
I was able to apply it without any problems, but there was a little air in it because it was applied to a curved surface (sweat), but that is acceptable.
Also, note that the cut lettering is a sticker that is connected to all other sizes, so it is necessary to cut, peel, and paste only the necessary lettering.
View detail
![Service Manual (Basic Version) [Japanese]](https://img.webike-cdn.net/catalogue/images/111290/service_manual_kawasaki_TS.jpg)
Fits: KAWASAKI ZX-10R, KAWASAKI ZX-10R
Essential for daily maintenance!
I was tired of searching for information on the Net every time I wanted to do routine maintenance and decided to take the plunge and buy the product.
The amateur level of maintenance will never make up for the price, though,
I wanted to know the Torque for tightening each part, and it is very useful because it has information on how to do various roses, etc.
My only complaint is that the tool Size is not listed, so that is annoying.
For PROs who have all the tools, they may just change the Size and use the one that fits, but if they want to buy just one tool that is used only occasionally, they will have a hard time if they do not know the Size.
View detail
Mino ware
This is a 300mlMug cup made of Mino ware.
Design with Image of KawasakiOil can.
0.3LITER 0W-100 and even the viscosity is indicated.
It's ceramic, so it's just right for everyday use.
View detail
Fits: KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Ninja 250, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 400 KRT EDITION, KAWASAKI Ninja 250 KRT EDITION, KAWASAKI Ninja 250, KAWASAKI Ninja 400, KAWASAKI Z400, KAWASAKI Z250
My knees feel better.
I switched to a high seat because the knee bend is tight in a normal seat and my knees hurt when I ride for a long time. I am 170cm tall and wearing riding shoes, and with Normal seat it was sticky, but with High seat, it was just a little more comfortable. When installing the seat, compared to the Normal seat, the front of the seat can be snugly inserted into the body of the vehicle and the seat can be snugly installed. The handlebar seems to be a little lower, but I am glad I bought it because the knee bend is more comfortable for me. View detail
Kawasaki green is nice. But it is too thin.
I bought a used Kawasaki KMX125 with a ponhang, removed the ponhang part, cleaned and polished it, repainted it, replaced the tattered seat with an external one, and even sprayed the logo …. I bought this Kawasaki green Key Holder to match the color of my motorcycle.
The color is Kawasaki green and it looks very nice. However, the leather is a little thin if I may say so. If I wanted to be extravagant, it would be better if the center was bulged like Cactus and the periphery was thin. To put it another way, it feels like a piece of cardboard cut and pasted together. I can't complain because of the price, but if possible, it would be better if the leather were a little thicker. Well, it is too much for Ponghang Motorcycle. But if it is a Motorcycle that costs more than 1,000,000, I don't think it would be suitable for it.
View detail
Kawasaki Radiator Screen
About quality and texture Light weight and thin stainless steel material. About the feeling of use Wanted something less complicated with minimal design. I'm afraid that complicated designs will hinder the air flow to the radiator as I stay in hot tropical city. That why I chose to purchase this design over other much protected materials products. Difficulty of installation Very simple to install just need about 10 minutes to install it. Cost performance and comparison with other product Price is a bit steep for its material and other brands may have the same price but better protection. But it's from the manufacturer I feel safe as they may design for minimum protection but not disturbing the air flow. About shipping and packaging It's light in weight but the surface area is wide. It's wrap with thin form but when the product came with any problem. Any concerns, cautions, or advice when purchasing Just to purchase for city riding should be ok I guess. But if like for further touring you might consider something which made out of a harder material. View detail
Fits: KAWASAKI Z H2, KAWASAKI Z900, KAWASAKI Z650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 650, KAWASAKI Z H2, KAWASAKI Z H2 SE, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-10R KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-10R, KAWASAKI Ninja 650, KAWASAKI Ninja 650 KRT EDITION, KAWASAKI Ninja 1000SX, KAWASAKI Z650, KAWASAKI VERSYS 650, KAWASAKI Z900, KAWASAKI Ninja ZX-4R, KAWASAKI Ninja ZX-4RR, KAWASAKI Ninja ZX-4RR KRT EDITION
Protection Seat is indispensable for the screen!
I thought it might be unnecessary since the ZX-6R has a Cowl (Screen) to protect the meter and not a touch panel. However, I thought it would be better to protect it just in case, so I had it installed as an option when I purchased the vehicle.
Is the film a little too small for the screen size?
View detail
Nice but a bit small.
Nice simple design. It compliments the pattern of the stock seat. It's a bit on the small side, so correct placement is key. A bit bigger would have been good. Make sure it covers the area where your belt buckle might contact the tank during normal riding. Also, be sure to fit it while the bike is level..either use the centre stand or paddock stand. View detail
Fits: KAWASAKI Z900RS SE, KAWASAKI Z900, KAWASAKI Z900
Slightly Large size
When it came time to install it, I felt it was bigger than I expected.
That may be what makes it more effective if it happens.
Installation is very easy.
The design is good except for the large size, and there are no problems with the texture and quality since it is an OEM product.
View detail
Fits: KAWASAKI ZX1400 NINJA ZX-14R ABS 30TH ANNIVERSARY 1441cc All, KAWASAKI ZX1400 NINJA ZX-14R ABS 1441cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R ABS 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 998cc All, KAWASAKI ZX1000 NINJA ZX-10R 30TH ANNIVERSARY 1000cc All, KAWASAKI ZX1000 NINJA ZX-10R 1000cc All, KAWASAKI ZX1000 NINJA H2R 998cc All, KAWASAKI ZX1000 NINJA H2 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 998cc All, KAWASAKI ZX1000 NINJA 1000 ABS 1043cc All, KAWASAKI ZX1000 NINJA 1000 1043cc All, KAWASAKI ZRX400 400cc All, KAWASAKI ZR400 XANTHUS 400cc All, KAWASAKI ZR1000 ABS 1000cc All, KAWASAKI ZG1400 CONCOURS ABS 1400cc All, KAWASAKI ZG1400 CONCOURS 1400cc All, KAWASAKI Z800 806cc All, KAWASAKI Z750S 750cc All, KAWASAKI Z750R 750cc All
OEM Product！
Highly reliable because it is OEM Product, no change etc. because it is Filter. View detail
Kawasaki Jacket
I bought a Jacket with the delivery of my Motorcycle, but to my surprise, the elfLogo Emblem was stuck upside down. I was going to wear it to pick up my Motorcycle, but the tension was so low because of the shock…. I don't think Webig is at fault, but I would like them to check it once when shipping. I thought about returning it, but decided against it because of the hassle. (I will remove the Emblem cleanly and reapply it.) View detail
T-Shirt for everyday use
Was the one you received as per Image?
Emblem is Largeish and looks better than the picture.
[How did you feel about the Fit?
I am 175cm 70kg and the M was a little small.
It was not unwearable or too tight.
How was your experience with it?
Large is good for everyday wear.
It does not have a cooling or heat retention function, so it is not worn when riding a Motorcycle.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT EDITION, KAWASAKI Ninja ZX-25R SE
I can recommend it.
OEM Parts, so even beginners can install it normally.
I know it's not much to look at, but I wanted to give a little more thought to the design,
Star Minus1.
View detail
OEMParts
The knee bites firmly when Cornering!
OEM only, no deterioration even after 2 years of outdoor storage
View detail
Fits: KAWASAKI Z1000 (water-cooled), KAWASAKI Z800, KAWASAKI NINJA1000 (Z1000SX)
Stylish Stand Hook Bolt by Kawasaki
This is a Stand Hook Bolt from Aftermarket parts of Kawasaki overseas.
The installation instruction manual included in the kit is the English version, and the text is small and the printing is rough, so I could hardly read it. I took a picture of it with my cell phone and enlarged it to read it.
Although the instruction manual did not list the Z900RS as an applicable model, I was able to install it on the Swing Arm using the longest of the three included Spacers for the Left Side and the middle one for the Right Side, even though it was limited.
Maintenance Stand was used, and we could see that the resin part protects the Swing Arm to some extent.
I like the Simple design.
View detail
Fits: KAWASAKI ZRX1200R, KAWASAKI ZRX1200DAEG, KAWASAKI ZRX1100-II, KAWASAKI ZRX1100, KAWASAKI ZRX 400-II, KAWASAKI ZRX400 , KAWASAKI Z1000, KAWASAKI Z900, KAWASAKI Z800, KAWASAKI Z650, KAWASAKI Z400, KAWASAKI Z250, KAWASAKI Z250SL, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR400χ, KAWASAKI W800, KAWASAKI W650, KAWASAKI W400
Functionality has improved with each renewal.
The color black is now more soothing than silver.
Prices are somewhat of a drawback, although the high cost of living may also be a factor.
View detail
One step closer to satisfaction
OEM Parts is definitely a little more ExactFit, if I wanted, the Mesh part would be a little thinner. View detail
Fits: KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI ZX-6R, KAWASAKI ZX-6R, KAWASAKI Ninja ZX-6R, KAWASAKI Ninja ZX-6R KRT EDITION, KAWASAKI Ninja ZX-6R 40th
OEMQuality
[How is it used?
Tandem seat not used so to seal it.
Was the installation difficult?
It's not difficult to assemble and install, about 10 minutes.
How was your experience with it?
It is quintessential OEMQuality, and the color and rigidity are perfectly acceptable.
Cheap Chinese copies you can find on amazon are made of peeled resin and are not well fixed, so they are useless.
If you are looking for used ones on Yahoo! Auctions or Mercari, please be careful not to buy Chinese Copy products by mistake. the fixture on the back of Seat is often different from OEM.
View detail
Comfort seat
Compared to the Normal seat, the back of the Seat is about 2 cm thicker, but the footing is the same.
Ride quality is fine for city driving.
With the Touring, my buttocks will still be sore after about 400 km, but
It is not unbearable.
I am very happy with my purchase.
View detail
Rider elements that assert themselves in everyday life
[How is it used?
August 6, 2023 to October 2, 2023, approximately 2 months.
Sewn onto a Polyester One Shoulder Bag and reinforced with adhesive, it can be worn from daily life to touring.
Was the one you received as per Image?
The product is exactly as shown in the image and as shown in the Image.
I would have been happy if the white part had been reflective Material, but it wasn't.
Was the installation difficult?
Subject:cabin zero 11L (https://www.cabinzero.com/products/classic-cross-body-11l-absolute-black)
The base of the white part was attached with an appropriate black thread that I had lying around, and it was stitched in parallel. Since the object to be attached was a bag, it was necessary to be careful not to make it too penetrating.
The outer circumference was secured with adhesive Aron Alpha ToughPower (). I was worried about the polyester, but it was not difficult except that I almost burned my fingertips. However, it was not difficult except that I almost burned my fingertips.
How was your experience with it?
Rider is a completely unrelated equipment that can add a little bit of Rider feeling to it, so there is a sense of satisfaction.
I learned that it is easy to add the Rider feeling, but very difficult to subtract it. On the other hand, it seems to be very difficult to subtract the "Rider" feeling! I learned that it is easy to add the "Rider" feeling, but very difficult to subtract it.
I have been rubbing it, etc., but it has not frayed or peeled off.
ROUGH & ROAD:Rough & Road Quick Open ZIP Tab Set Lime green (https://www.webike.net/sd/23550988/)
[Included Parts:were they on?
Only this Emblem, nothing in particular.
[Was there anything that disappointed you?
Nothing in particular as it has neither peeled off nor come loose.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail