Reviews
Power will be increased, but it cannot be driven on public roads.
I installed it on a 21 year old HPS300. DECATALIZZATORE As stated, this is an exhaust pipe for Race without a built-in catalyst. It cannot be used on public roads.
KITACO Exhaust Gasket XH-09 was used.
The weight of the product is about 2 kg, and since the OEM exhaust system weighs about 5.2 kg, a weight reduction of a little over 3 kg can be expected. The power improvement in the low-speed range can be felt quite clearly, and the feeling of shortness of breath under 4000 rpm is gone. The volume is very large.
The OEM Exhaust End was used as is for installation, but (perhaps due to the newer model year of the Both Sides, or perhaps due to individual differences in the product itself) the joint with the Exhaust End was too short, and the tightening with the band was not secure.
Joint gasket is made by KITACO JPK-3. (φ37×φ32) However, the outer diameter was too large, so we could not install it properly. Since it was troublesome to find a substitute, we used heat-resistant aluminum tape wrapped around GRUGRU. It looks a little awkward, so I am thinking of looking for a Gasket of about φ36×φ32.
View detail
GPR Slip-on Silencer
It's light and has a good sound. Touring has become fun. View detail
Fits: SUZUKI GSX-R1000
Low pitched and cool.
With Silencer, it seems to be able to pass the inspection as it is. It has a nice sound like Stainless Steel. View detail
Fits: DUCATI MONSTER 1200 R, DUCATI MONSTER 1200 S
If only I had realized it earlier …
I wanted to install GPRPower Cone from the first time.
I bought the SCPROject because it is listed as a 14-16 MONSTER S21200s 1200r and I was afraid it wouldn't fit.
It was later determined that the exhaust pipe joint diameter was the same.
I ordered it quickly and it arrived about a month later.
I like the Large change in both design and sound quality.
View detail
Fits: TRIUMPH SPEEDTRIPLE
GPR Exhaust System
I didn't even have a picture of the product installed and feedback, but I was sent a picture of the installation and ordered it.
Installation was easy, but the bracket is too long and needs to be modified. After installation, as you can see in the picture, the bracket is nice and parenthesis is nice as it rises up to the top.
The rest is just right, not too large and not too small.
Silencer has a Quantity:2pc. There is a set baffle, which can be adjusted if you want to make the sound larger.
I recommend it for its cosmetics.
View detail
Fits: KAWASAKI ZX-9R
Cost-effectiveness is Large.
I made the exhaust system of the Ter-MINIoni a wound thing, and bought it for exchange.
The weight of the Titaniumium pipe is about 1kg heavier than the Titaniumium pipe Ter-Mignoni.
The product consists of a silencer that is inserted into the center pipe and a silencer that is attached to the exit of the exhaust system. 【Installed at the time of shipment Center Pipe・Exhaust SystemBody・Exhaust Band・Spring・Nut・Bolt.
As for the silencer, the one that is put in the center pipe is not felt the effect so much, and the one that is put in the exhaust system outlet is the effect Large.
Snap Ring Pliers are required to remove the silencer from the exhaust system body, but since the ring is quite hard, the tool itself needs to be strong and solid.
The sound volume with all silencers removed is a little large, but I personally think it is in the general range for an external exhaust system.
Compared with the sound quality of the thirsty feeling of the Titaniumium pipe, the sound becomes a little muffled feeling, and the thing that I felt as the output characteristic increases the torque from 6,000 rpm because the total length of the exhaust system is short, but even so, the low speed is not sacrificed remarkably.
The price is about half the price of the Ter-Minioni, but I don't feel any inferiority in the performance aspect, and I think that it is quite a bargain Exhaust System.
View detail
Fits: SUZUKI GSR400
Very good sound
I'm writing this as I recall because I purchased this on December 07, 2018.
First of all, it does not correspond to Japanese Vehicle Inspection, so please pay attention to that.
I remember choosing the GPR because I liked the fact that it looked NORMAL.
Japanese Vehicle Inspection Correspondence had only YOSHIMURA or WR,s at that time, and those two needed to be processed into a heat shield plate, as I recall.
I chose this one because I could see that the exhaust system was changed at a glance.
If you lick it from the bottom, the butt of GSR400 becomes more attractive.
The sound is very good, it's Large sound but not too loud Level.
This is a layman's experience, so please don't take it for granted, but the original thin, low-speed Torque
I felt like I had even less.
Not only GPR but all exhaust system is common, but GSR400 needs to loosen the exhaust system because of the structure of the lunch box.
It was almost impossible to install, so it was a pain to put on and take off.
No processing etc. was required.
When I switched to Motorcycle, I flushed it to Yahoo Japan, but I wrote a lot about it in my blog at the time, so if you want to refer to it.
https://imp.webike.net/diary/174227/
View detail
Fits: KAWASAKI ZR-7 S, KAWASAKI ZR-7
It exceeded my expectations
I have never seen a white silencer before, so I bought it with half white surface The installation is very easy, and the installation bolt of Normal silencer can be installed by heat or Rust If it's not sticking, it takes a few minutes
I thought it would be noisy from entrance to exit with a straight pipe, but it is surprisingly quiet around Idling If you turn it, it becomes a reasonable volume, but it does not disturb the ears in the sound quality that is calm
The power feeling is no different from NORMAL, although it's not turned to the top
it comes with an eMark and a certificate, so it should be OK to inspect the car?
View detail
Fits: HUSQVARNA NUDA 900 R 12-13, HUSQVARNA NUDA 900 12-13
Satisfied
OEMSilencer of NUDA 900 R reached about 23,000? And the welding bow broke and replaced..
Installation was easy and it was attached in around 15 minutes. Cover of OEM's Carbon is attached as it is.
Baffle also has two entrances and exits of Silencer. Both removable. It is a little noisy if you remove both.
I do not know what to use Bolt comes with (Lol)
Also firmly packed, two Silencer and two intermediate Pipe G. P. Did you come with a special bag of R?
It is not so expensive for the Large external model Exhaust System.
View detail