Reviews
thin and light
Basically, you can use tools with the appropriate size, such as Socket and Glasses, but you should always have a MONKEY in your tool box, for example, to remove a Large Bolt that does not have the appropriate size.
This MONKEY is thin, light and very easy to use.
It may be the best MONKEY I have ever used.
View detail
For cleaning.
I bought it because it seems useful for cleaning carburetor and for cleaning tight places.
Quantity:1 Set of 5pcs. so it can be used in different places, which seems convenient.
View detail
That's about it
I used it for the first time and was able to adjust it. It would have been easier if the tip was cut thinner to make it easier to get into the gap. View detail
Sturdy as expected.
The clutch is so tight that a cheap nut remover was damaged and could not be turned. As the description says, this one is for removing the clutch, and it did not damage the clutch.
Unfortunately, only 24mm and 30mm are available. We would like to have an intermediate 26mm.
View detail
as if it were indispensable
It's so simple, but it's such a good Tool that I don't think I could do without it.
There is a video from the Manufacturer on how to use it.
View detail
For disassembling the rear shock (removing the spring seat)...
The product is a tool that allows the Spring Seat, which receives the Spring, to be removed by wrapping the Tie Down Belt around the Spring and then retracting the ShockBody.
It is not easy to use, but it is easier to use than the type that hooks the Gold Hook and shrinks the Spring.
I am afraid that the Gold Hook type might gap the Hook and cause a loud wound on the Spring, and I am afraid that if the Hook comes off while shrinking, it will be nothing more than a joke (in the worst case, the strong Spring will go flying off). However, this product is safe because the Belt is completely circled around the Spring.
It's hard to use, though.
Also, it is inexpensive for this type of Tool.
The price is comparable to mass-market inferior products such as Sto0rt and Astro P0ducts.
Instead, the construction is not much different from the cheapest products of the same type.
But it is good because it can be used properly!
Even a firm spring can be compressed without deformation of the tool when the shock is compressed.
The simple shape of the fork allows it to be used for front forks as well, depending on the ingenuity of the designer.
Shrinking the Spring to loosen the Nut that holds the InnerCartridge ROD in place would normally require a special tool, but with this, it can be done! It can be done! (Though it requires a lot of ingenuity.)
This is an imprementation that is of almost no use to anyone since we normally do not disassemble Rear shock, but it is a Recommendation since it can be used normally.
View detail
Most convenient!
Cheap and easy, anyone can apply Rim sticker beautifully.
It's a great costumer!
However, be careful not to fold the front and back too many times or you risk breaking it! (!)
View detail
For cleaning spoke wheel
Tip Interference Wound Prevention Cap
It goes in between the fine Spoke wheel.
Easy-to-grip Grip
Good tools to do a good job
View detail
Off to wash the car
[How is it used?
I chose the cheapest and best in stock for Off Car Wash for Vehicle and this is what I got.
Was the one you received as per Image?
This is a common type of Car Wash Brush. I think it is the same no matter what you choose.
How was your experience with it?
The mud fell off well.
[Included Parts:were they on?
Nothing in particular
[Was there anything that disappointed you?
Nothing in particular. It's a good price.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
Not particularly
View detail
Usable as usual!
[How is it used?
I bought this for maintenance of my CD50, which is becoming an old car, because the screw holes and bolts are getting a little hard to turn due to rust.
Was the one you received as per Image?
It looks cheap, but it was my first tool, so it has the minimum functionalityQuantity:Set
How was your experience with it?
The case is a slide type, which is unexpectedly difficult to use, but the product itself is not bad and is still in this condition and durable even after several years of use. The functionality is also fine, and it is still in use.
[Points to note]
Please note that this product is for Steel, so Material:Cannot be used on Stainless Steel. It will ruin the tool.
How did it compare to other products?
This Quantity:Set is 20 piecesQuantity:It is a Set and Compact, but it is fully functional. Quantity in another company's product.:I was not sure about 1 Set of 40pcs. but I am glad I went with this one.
I feel like I can make original parts by molding the screw holes, etc., and I think I am going to get into it.
View detail
It is good to be able to do AlignmentCheck of Chain easily!
I used to check the alignment of a chain with a water thread, but I was too large, so I bought this one, which seems to be easy to check.
The product is applied to the Sprocket, and as long as the direction of the stick coming out of the Sprocket and the direction in which the Chain is running are parallel, the product is OK.
Screws to fix this to the Sprocket are also Material:Plastic has been taken care of so that Sprocket will not be damaged.
If I had my way, it would be even easier to see if it had a longer bar.
View detail
Definitely buy it.
I thought it was paper, but it is Plastic.
Mist spray and don't mind getting wet.
If you want to put a Rim sticker on it, definitely buy it.
View detail
Aggressiveness to paint is plastic
I bought this to solve the Sticker hell that seems to be the end of the world.
Although it is a Stainless Scraper, it is not that aggressive to paint due to its tip shape.
I was able to remove Sticker quite well without chemicals.
It is by far easier to remove than plastic Scraper, but note that it is not as aggressive to paint.
View detail
Required for MotorcycleMaintenance
I have been using a slotted screwdriveretc. to muddy my brown, but I bought this to replace a set of seals on my Caliper. Finally, I can replace seals without damaging them here and there. View detail
War for Vehicle
MINIBrush, wash for Vehicle and the price was cheap so I bought it to try it out.
It helps that it can wash small areas and is inexpensive.
If it goes bad again, I would like to purchase Repeat.
View detail
Band of Exhaust System
Exhaust System band removal becomes easier. View detail
Also on Front fork
I couldn't get the YSS Fork Spring to push in by hand, so I tried using it on the Front fork. it press-fits up to the screw threads on the Inner Tube, and from there I could turn it by hand. There may be other uses for this spring. View detail
If you want to remove the Exhaust System, here it is.
It is very useful for removing the Exhaust System, Chamber, and Exhaust Manifold Spring. Before I bought this product, I had a hard time removing them with the radipen, but with this product, I was able to remove them in one shot. I wish I had bought it earlier!
The T-shaped handlebar is easy to grip.
Is the hook a little small?
View detail
Normal.
It is difficult to use by matching both sides to the groove.
I wish I could do well, but I'm not very comfortable.
It is safer and more comfortable to just remove it with your fingernail. -------------------------------------------------- -------- This is hard to use both sides to the groove. I hope you can do it well, but it's not comfortable. It's safer and more comfortable to use your nails. Powered by Google Translator
View detail
Versatile Tool for your Spark Plug Maintenance Needs
About quality and texture: I am happy with the quality of the spark plug gap tool from Lisle, made from a steel construction with the assembly secured with rivets. About the feeling of use: I have used this tool to correctly measure and adjust the gapping of my spark plugs quickly and accurately. The combination of the measurement wires and adjustment tabs makes this tool very versatile for spark plug maintenance needs. Products to buy together: Some more tooling like a tappet adjustment wrench would also be desirable to purchase along side the spark plug gap tool to simplify these processes when it comes time for your annual maintenance. Difficulty of installation: The process to install takes a few minutes, place the measurement wire between the center electrode and ground electrode to obtain the clearance and use the adjustment tab to open or close the gap by adjusting the ground electrode. Not difficult to do. Cost performance and comparison with other products: Good costing as this is a quality made spark plug gap tool from Lisle that has with stood numerous usage without failure and much quicker and easier to use and read then feeler guages. About shipping and packaging: Sea frieght is my preferred method of shipping due to the lower cost and it is fantastic that it has returned as an option once again so I can put my money toward parts and not high shipping costs. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: Good for common sized gaps but may not be suitable for every situation unlike a set of feeler guages. View detail