Reviews
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer 250, SUZUKI Gixxer 250
Processing Large was strange.
3.I really appreciate the 5cm lowdown!
152cm, sticky feet
Too low,
Add front fork extrusion
Inner fender interferes and needs to be modified.
So, the labor cost was quite expensive.
View detail
Is it just about weight reduction and appearance?
After the previous Impression, I noticed that using the Center Stand is easier, and the engine seems to blow better. The waste leak is the same condition as the Single Muffler's Impression. I think that the manufacturer is not inspecting the exhaust for leaks, etc. I think it is just a design and weight reduction. I have installed Sansei Racing's Full Exhaust System Pai Exhaust System on my GSX more than 35 years ago, and I could use it without any problem. The technology must be more advanced than back then, however, the quality of the product is still very poor. Well, it is cheap or not so cheap. Since the intermediate pipe can be used, it would be better to think of it as a one-foot peg for Silencer replacement. Would it have been better to eat barbeque? I would like to tell the manufacturer to do a better job. Please don't think it can't be helped because of the low price. View detail
Don't ask too much of the 250 Slip-on Silencer.
Power seems to have somehow increased. It may be because it became lighter. By the way, the acceleration power from the 6th gear of 30 km was improved. Because it became lighter, it became a little easier to put the car in bed. The price is cheap, and if it is design-oriented, it is possible. However, the height of the exhaust system was not exactly right, as you can see in the advertisement photo. I guess we have to compromise as much as we can. There is a little exhaust leakage from the gap where the Silencer is wrapped with Stainless Steel. I am thinking of filling it with liquid Gasket. View detail
Well! Is this what it looks like?
Installation is relatively easy and good, but it would be better if the base plate were the same color as the body, since it is made of SUS material and is a different color from the body. It would be better if the base plate was the same color as the body. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
Recommended for those who prefer a noisy exhaust sound.
I purchased a New Model catalyst equipped MODEL in December 2022. I bought a new model model with catalytic converter in December 2022, but no external exhaust system was available. I found METAL GEAR and decided to buy it immediately. I decided immediately. However, I heard that it is compatible up to the previous model. The body structure is exactly the same, so I asked if it was possible to assemble it.
The bag footpeg plate is easy to install.:2pc. The Exhaust System was installed with a needle Gold Hanger. I was able to install it with a needle Gold Hanger.
The exhaust noise is loud, but quieter than the loud noise of a 400 or 1000. I feel sorry for the neighbors early in the morning and at night.
The Torque feel at low to mid speeds has improved to the point where it can be felt.
I don't know about high speed, maybe it hasn't changed? In one section, it was 10km/h faster than NORMAL.
After Fire.
View detail
Fits: SUZUKI Gixxer 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer 250
Is it too low?
Things are fine, the 35mm drops more than I expected.
Rear Sets are always required. Even so, the brake pedal hits the ground as hard as it can when the motorcycle is tipped over and turns while dragging the rear brake.
View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer 250, SUZUKI Gixxer 250
Great stability when Helmet is placed.
Installed on a Gixxer 150, BoltQuantity by Grab Bar:The bolt on the grab bar can be removed with a 12mm box wrench.
With the common helmet lock that is attached to the Tandem Footpeg, I was concerned about the helmet cap interfering with the footpeg and swing arm area, but this one can be placed stably on the Seat, so there is no need to worry about that.
The texture of Stainless Steel is also good.
View detail
Fits: SUZUKI Gixxer SF 250, SUZUKI Gixxer SF 250, SUZUKI Gixxer 250, SUZUKI Gixxer 250
Lowdown was the right choice.
Quantity with Short Stand:I purchased the set. I found a Webig installation service shop nearby and brought the parts and motorcycle to them for installation. I had also purchased a Step upBlanket, so I had it installed at the same time. The foot position is natural and the handling is fine. Driving Jixxer is going to be fun from now on. View detail
Inaccurate, poorly made
The silencer of the exhaust system, which arrived brand new, was mysteriously left unpolished and covered with rust. The hole for the center stand stopper is too small to fit even the stand damper. I have no choice but to re-drill the holes in the bracket and repaint it! I will have to re-drill the holes in the bracket and repaint! 。 If you're a PRO, let's make it right! View detail
Accuracy is problematic.
The exhaust system I purchased came in, but the finish of the exhaust pipe was so crude that I thought it was brand new. I had to have it replaced. The new exhaust pipe was better than the first one, but was it Chinese quality? The replacement exhaust pipe was better than the first one, but it was not the quality of a new one. I think it would be better if they were made a little more carefully. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-S125, SUZUKI GSX-R125
Earthquake protection.
There have been a lot of earthquakes recently.
I was worried about OEMSTAND, so I decided to go with something with a lower center of gravity.
good point
Simply replace the existing STAND.
I put it in Handlebar Lock, 1st gear, and set it to this STAND, and it was Large sturdy at about 5 intensity of the earthquake.
A bad point
It is better to have two people for installation, one who is holding it down and one who is attaching it.
Short suspension compatible, but OEM suspension is also available. How about for earthquake protection?
View detail
So easy to install!
I chose this product because of its low price, one-pipe spec. and the abundance of Included Parts:Large, carefully packaged, and the parts were individually packaged for easy confirmation.
I was a little anxious about replacing the exhaust system for the first time, but I had no trouble at all because the instruction manual included a detailed description of the removal of the OEM exhaust system and the positioning of the washers. If I may say so, the shape of the center stand stopper has been changed, and the parts to close the Left Side Exhaust System have been installed in the same time line.
The exhaust sound is OEM+α with the baffle on, but not unpleasant while driving, and it is quite good. I have not had much experience in listening to and comparing other exhaust systems, but it is not unpleasant sounding. It is loud enough to drive in a residential area in the morning if you don't blow it.
View detail
Too many exhaust leaks.
I chose this product because of its low price, one-pipe spec. and the abundance of Included Parts:Large, carefully packaged, and the parts were individually packaged for easy confirmation.
I was a little anxious about replacing the exhaust system for the first time, but I had no trouble at all because the instruction manual included a detailed description of the removal of the OEM exhaust system and the positioning of the washers. If I may say so, the shape of the center stand stopper has been changed, and the parts to close the Left Side Exhaust System have been installed in the same time line.
However, Silencer's exhaust leakage is a troublesome Level of Large. There is a large gap under the baffle on the end side, and the exhaust leaks out from this gap to the Large level. If it was only the end side, it would have been good, but there is also some leakage from the bottom of the inside side, and although not as much as the end side, I feel quite a lot of wind pressure.
Of course, the seam between the middle Pipe and Silencer leaks, so I'm sealing it with Holtz Fire gum, and I'm currently looking into SilencerBody leaks, but I can't find any way to fill the gap so far, so I'm using Holtz Gap for Exhaust System. I will try Pate and if it doesn't work, I will give up.
In general, this is an inexpensive exhaust system, so it is a product for those who can afford it. Do not expect too much.
Oh, and lastly, the sound, with the Baffle on, is OEM+α but not unpleasant while driving, and it's quite nice to hear from behind. I have not had much experience in listening to external exhaust systems, but it is not an unpleasant sound. It is loud enough to drive in a residential area in the morning. However, I have not tried to remove the baffle because it is press-fitted and cannot be removed. What a mess.
View detail
METALGEARFull Exhaust System
I'm not sure if it needs some work to be installed. I'm not sure if it's an individual thing or not, but it's a very nice bass sound from low speed that I was expecting. View detail
Fits: SUZUKI GSX-S125, SUZUKI GSX-S125, SUZUKI GSX-R125, SUZUKI GSX-R125
It's so much easier to ride.
I ride a GSX-R125 with my wife.
I have sticky feet, but my wife had a little trouble with both feet, so...
When I found out about this product, I bought it immediately.
After installation, the Seat position is clearly lowered with two cars side by side.
He was pleased that it was easier to ride after the test drive.
The replacement work is also much easier than the exhaust system replacement, so if you are having trouble with your feet, this is a recommendation.
(I didn't remove Cowl, I just displaced Leftfootpeg)
View detail