Reviews
Let's save up before it's gone.
I bought this for the exterior of my 2012 PCX.
It's not that it was cracked, but I bought it because I thought that the day when I can't get the exterior at this price is near because SmallWound and Crack are seen in some places due to too much severe environment and new PCX is coming out rapidly.
[How is it used?
It looks like the current exterior will hold up for the time being, so it will be fertilized by Chest for a while.
Was the one you received as per Image?
I was surprised that the paint was more solid than I had imagined.
Lame processing? If you don't compare it well, you can't distinguish it from OEM.
Was the installation difficult?
I haven't installed it yet.
However, the claws that hold the Cowl in place are really easy to break, so if you're planning to work on it, please be very careful!
[Included Parts:were they on?
It came with a large piece of corrugated cardboard. (PACKING)
If you could just sum it up for me...
[Was there anything that disappointed you?
It was better than I was expecting.
If I had to guess, I'd say 、、、、 Ummm...
Other items that would be helpful
Items to buy together
→ Let's buy a lot of things together at this time.
View detail
Fits: HONDA LIVE DIOZX, HONDA LIVE DIOZX, HONDA LIVE DIO, HONDA LIVE DIO
External Piston may not be used.
I bought it to replace the piston ring, but when I removed the piston ring, it was already changed to an external piston, so I couldn't put it on. View detail
Fits: HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIOZX, HONDA LIVE DIOZX
I used this service for Piston replacement.
It was cheaper than the OEM and the quality was fine. View detail
Brake disc
The arrival of the goods has been busy and no time to install. After installation, it does have an effect. The rear brake will not be dragged when stepped on to the end, and it will not slip. The safety is greatly improved, the daily riding safety factor is greatly improved, and the pumping feet feel good. The quality looks pretty good, but it still needs time. The price is relatively affordable, and the price-performance ratio is very good. It is recommended to buy, and the better braking effect will relatively improve the safety of riding. ---------------------------------------------- I received the goods have not had time to install it, it does have an effect after installation, the rear wheel brake to the end will not drag and sideslip, safety greatly improved. The riding safety factor greatly improved, on the pump popping feet feel pretty good. The quality looks good, still need time to Proof it. The price is more affordable, the cost performance is very good. I recommend everyone recommend buying because the good braking effect will relatively also enhance the security of riding. Powered by Google Translator View detail
Fits: SUZUKI ADDRESSV125, SUZUKI ADDRESSV125
perfectly
Well packaged and easy to install.
It has been reborn as a new product.
View detail
![Seat Cover [SH-022T]](https://global.webike-cdn.net/images/reviews/518/00001012518L.jpg)
Shiny as the picture and cool
Seat cover came fast and look pretty cool actually ! It was easy to put on the seat frame, and use manual stapler with 8mm staple. Dont forget to put as much as possible. View detail
It's not often, but it's handy to have.
We have a lot of motorcycles stocked in our garage. We have a lot of motorcycles in the garage, some of which have been sitting for years, so when we want to ride them on a whim and do a little maintenance, sometimes the brake fluid is replaced and the blizzard cap deteriorates and breaks. This is for such a case. View detail
Fits: HONDA LIVE DIOZX, HONDA LIVE DIOZX, HONDA LIVE DIO, HONDA LIVE DIO
For Refresh
Purchased for the LIVE DIOZx Refresh.
If the OEM Seat is torn and Sponge gets wet, the hole in the back side of the Helmet in will be flooded with water, so I replaced it.
Compared to OEM products, BALI and other products are not as well made.
In the case of exchange, they told me to exchange the whole bracket, but the bracket did not come off.
I installed it without replacing it.
It closes, but there is a Wobble and it floats slightly, so I'll get to it later.
I would like to replace the Bracket as well.
It's a so-so price, but it has Sponge quality and BALI, at Tucker.
We'll see how durable it is in the future as it's not as well hammered.
View detail
For Refresh
I bought Live DIOZX Light because I was worried about yellow spots due to its ageing.
I tried to install it, but the shape of the coupler and Wiring is different from OEM.
The shape and position of the notch position is also different when the OEM Light is removed and fitted into the Cowl.
In addition, the shape is the same as the OEM Product, but it is slightly smaller and more rickety in the Cowl.
Light, Blinker's bulb Waterproof is also worse than the OEM.
It was a waste of your gold as it is cheap but not installable.
View detail
It can be cleaned off.
It is useful for cleaning grease and stains between fingerprints and fingernails. The brush with just the right hardness and the easy-to-hold body make it easy to clean the stains, so it is essential to use it after work. View detail
You can wear it easily.
It is a half cap that the matte quality looks good and can be worn easily. I think that the safety aspect is a little low only because it is a half Cap, but it is for 125cc or less, so it is convenient to be able to take it on and off at once for the running of a short distance. View detail
Folds into a compact package.
It folds up and folds down to make it compact and easy to store. It can hold up to 9 liters of water and is just as large as a regular bucket. View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA Super Cub 90, HONDA Super Cub 90, HONDA Super Cub 90, HONDA wallaroo, HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB70, HONDA solo, HONDA DAX70, HONDA DAX, HONDA BENLY50, HONDA BENLY50, HONDA APE 50, HONDA APE 100
Installed on TOWN MATE 90
It's for the CUB, but it can be attached to the TOWN MATE 90.
Just paint G17 Bond and put it on
It is recommended to stop it with Bond because it moves when you stand and ride on the ground though it is large and strong even if you do not use Bond.
View detail
Fits: HONDA LEAD110(EX), SUZUKI LETS(4Cycle), SUZUKI LETS4Basket, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50
Longevity.
Used for Headlight Bulb of LEAD110. Because the Headlight Bulb which is attached from the beginning was quick to run out unexpectedly, I replaced it. I think that Timing which runs out with the consumable product is RoseRose, but I can use it safely. View detail
Car wash essentials
Very useful.
As you use it for a long time, the water that you put in it will seep through, but it's not leaking.
As the bucket gets older, if the water level in the bucket gets low, the bucket may collapse and flood with water.
I think it's durable enough for the price and ease of use.
I can recommend this product!
View detail
It's cheap but solid.
I used it for my SHOEI Jet helmet.
I didn't expect it to be too cheap, but it is surprisingly solidly made.
This kind of Adapter becomes loose as you use it, and when you turn your head to the side, the shield will open by itself.
View detail
Honda X11
Very good quality. ABS plastic. Fast delivery. Very well packing. Superb on my X11. Highly recommended. Highly recommended. Highly recommended. Highly recommended... Writing review on this website is NOT easy... too many demands. View detail
Honda X11
Fast delivery. Perfect cowl for Honda CB1100SF. Very good finishing. Do not need any upgrades. Plug & play :) Motorcycle ABS plastic, black metal oxide bolts... View detail
Initial familiarity is a problem.
The Pad that I bought as a spare was finally installed.
Immediately after installation, both touch and efficacy are poor, and I am finally satisfied with the condition after about 500km.
When I looked at the Pad's hit, I found that it pushed the inner diameter side of the disc about 3-4mm more than the OEM Pad, and the disc was shaved off to push correctly.
If you have a step on the inside diameter side of the disc, pay attention to the initial performance.
View detail
Fits: HONDA LEAD110(EX), SUZUKI LETS(4Cycle), SUZUKI LETS4Basket, SUZUKI LETS5, SUZUKI LETS5G, SUZUKI Address50, SUZUKI Address50
It's more like an ordinary light bulb.
I bought it because it was cheap and they had it in stock.
The light bulb of the Motorcycle is not particularly bright, but it is not so dark that I can't see it, so there is no problem if you use it normally.
I will also buy this one if it goes out again as it is a commuter Motorcycle bulb.
View detail