Reviews
I was disappointed.
Looks like a zero.
The position is the same as OEM though it is called "Rear Sets".
Grip of footpeg is also 0
Change lever has a small adjustment range ?
Brake pedal adjustment range is small ?
I was really disappointed with the small adjustment range, which was the most important factor.
Moreover, it is difficult to work with.
I decided on this product because I didn't want the Position to be too tight, but I've been using another Manufacture's Rear Sets.
I should have done it.
View detail
The vehicle may not pass inspection quickly over time!
However, recently, I was getting a lot of comments from people around me that it was really Japanese Vehicle Inspection Correspondence and that it was too noisy. The OEM value was 93db at 7000rpm, and the most Large 98dB at the time of inspection. (Relative value) MORIWAKI was the first to be certified by the JMCA. (Glass Wooletc. would be nearly new) The value of the "1" is certified at 96db, so there is only 2db of leeway. If the exhaust system is not durable enough, there is a high possibility that it will not pass the test if it is burnt to some extent. The number may vary depending on the noise level meter, conditions, etc., but at this stage, it is almost certain to exceed 98db, so it will not pass inspection. I hope that if you are going to sell your product as a "new" product, you will consider durability and deterioration over time when making your product! I don't know if they made this product with the idea of just getting certification at the time, but I wish they would have thought a little more about it. In the end, if this is the case, I would have been happy with the OEM product. If you can't replace it by yourself, you will have to pay the labor fee for the car inspection, and you may be subject to a law enforcement action in the first place. View detail
Paint was peeling.
I bought MORIWAKI parts because I didn't want to buy inexpensive CHINA parts and have the paint on the bracket peeled off, but there was a 15mm paint peel on the left side of the bracket. It is huge. It was not invisible when I inspected the product. I lost a lot of money. View detail
Very nice high quality materials, bad execution. Quality control must be bad at Moriwaki
1. Had this shipped from Japan to the US, cost a lot of money. 2. I received a defective system: the exhaust pipe was cut wrong so the nut on the right side of the engine cannot be tightened even with a short socket due to the curvature of the pipe being so close to the base where it connects to the engine. 3. Then the clearance between the mounting base and the muffler itself is so close that you can't get ratchet in between to tighten the 14mm bolt, you have to get creative and use other tooling. 4. The muffler may not be a "catalyzing" muffler, because the fumes that come from the muffler are so noxious, I have to turn the bike off at stop lights, because the fumes are super nasty and noxious. (This does not happen with the stock muffler or even other muffler systems that I used). Other than that, when I opened the box, I noticed all the materials were packaged very nicely and the finish seemed like very high quality (it's too bad the quality control was bad). As for the sound at idle, it's pretty nice (actually sounds like a motorcycle, rather than a scooter) Once your are accelerating, the sound is reduced highly and is nice and somewhat quiet at higher speeds. If all the issues that I mentioned were cleared away, I would give this exhaust 4 stars, but until it's remedied, Moriwaki gets 1 star for quality control issues for now. View detail
They're not the same color
You will receive Sticker Sets in the color RedSilver, not RedWhite as shown in the photo. I think they are totally different for the way they look in the photo.
Since the part number is the same, is it a change in the Manufacturer's Spec.? I'm sorry to hear that.
View detail
I question the color notation.
It was the BLACK EDITION. "Black" I'm sorry. Silver?" The color was such that it made me think.
It's a Gun meta that leans towards Silver.
At the scientific limit, this color is "Black" Even if it's the closest thing to the original, it's clearly not the same color as in the photo.
Etching factory is still the best place to start. "Black" The Gun meta was close to
View detail
I can't install...
I bought it because it fits CBR900RR (00) and VTR1000SP, but I couldn't install it on CBR900RR (00 929) because the back side hole position didn't fit at all. It is a pity. View detail
MORIWAKIOil catch tank
There was no Space in the car body and it could not be installed. View detail
Dimensions?
I received my order they do NOT fit my RS125 Honda Wheel. They are 1.3 mm too big ? What can be done to correct this situation. Can you tell me the correct dimension. I am sure this a genuine error View detail
Early arrival - - -
I installed it immediately..
Engine exploded..
I was touched by the imagination as imagined.
Because it is not a MORIWAKI follower as it is a remote island
I want to deliver the goodness of Motorcycle to everyone on this bombing sound Titanium.
View detail
Fits: KAWASAKI ZRX1100, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZrX1200ZrX1200 DAEG
If it attaches to a ? ZRX1200 DAEG in since it is common with ZRX1100&1200 The Clearance with a Crankcase, it is only about 10 mm -- standing and failing to get off the ground -- Wound prevention -- Although a +20-mm Bolt was purchased and a few was
If it attaches to a ? ZRX1200 DAEG in since it is common with ZRX1100&1200 The Clearance with a Crankcase, it is only about 10 mm -- standing and failing to get off the ground -- Wound prevention -- Although a +20-mm Bolt was purchased and a few was extended from slippage Massey ? us, Mr. MORIWAKI, who is ineffective although purchased, the direction of the origin of attachment is likely to die. Is the Type too attached to a Crankcase directly better? View detail
It had equipped before. Since the car body rotated centering on the skid pad when it fell on the right, it could roughly cleave and the engine stopped however, becoming useful from the engine block of the bolt equipped with a skid pad. However, si
It had equipped before.
Since the car body rotated centering on the skid pad when it fell on the right, it could roughly cleave and the engine stopped however, becoming useful from the engine block of the bolt equipped with a skid pad.
However, since the meter tank was unhurt by this favor, although it is bad, it does not generally become precocious, but there is no mind which I already attach.
View detail