Reviews
Too big, mostly for Wheel
[How is it used?
For undercarriage wash of Motorcycle
Was the one you received as per Image?
It is so much bigger than I imagined. It looks like the size of a car wheel brush. It has a Size feeling like a Brush for a wheel of a car.
How was your experience with it?
It is indeed flexible, but I think it is too big and not suitable for washing motorcycles. If it were half the size, it would be easier to wash the area around the rear shock and around the engine through the cowling, but I don't want to accidentally damage the paint with it.
It would be good for something like NAKED with an air-cooled engine.
[Points to note]
The bristles are too hard to wash painted surfaces, so it is mostly used around the feet and engine area.
[Opinions and requests to Manufacturer
Put it out half as fine as it already is.
View detail
![[Aebs] Spring Hook Medium](https://img.webike-cdn.net/catalogue/19270/06191834_51c17b0f544aa_TS.jpg)
Spring Mounted Hook
It is used for spring removal and attachment of the Exhaust System.
The price is reasonable, and it can certainly be made Compact since it can be split in two.
It is not used that often, but it is good to have 1 pc. to take the spring on and off for maintenance.
View detail
Spring hook
It is used for spring removal and attachment of the Exhaust System.
The Type is a little long, so it seems to be easy to apply force when pulling, but in some places the long length gets in the way and makes it hard to work with.
It is good that it can be split into two parts, can be removed, and can be pulled by swinging it at an angle, but it turns too much and cannot be pulled properly, making it difficult to install the spring hook.
View detail
Don't scratch it.
I purchased this tool for a different purpose than its original use, such as removing parts attached to resinous materials, where I don't want to scratch the surface.
It is resin, so it is not that strong, but it seems to be good for use to remove it by placing it in a gap without much force. The surface is covered with silicon rubber, which is also resilient and helps prevent scratches.
Since the price is not that much, you can give up even if it breaks after a certain amount of use.
View detail
Exchange for Refresh
I bought a used ZZr, a motorcycle that probably hasn't had its suspension linkage greased in 26 years.
It can be used normally, but the cap seems to come off easily.
View detail
To remove Cowl!
This is an essential item for Cowl removal. It is recommended to apply grease to the joint part for the next time after the cowl is removed. View detail
Spare
I purchased Body to remove plastic polish, scratches, and dirt from cowl and screen parts, but I thought that Included Parts:alone would soon be ruined, so I purchased this Spare.
I wanted only the replacement Buffing.
Brush is not used very often, so it was unnecessary, but Quantity:It is a Set, so there is no choice,
View detail
Cut
The price is not that much, and it has a good feeling of ease of use.
The handlebar is large, easy to grip, and easy to apply force.
It is also nice to be able to change the position of the blade with Slide.
View detail
easy to grasp
The Grip section is thicker for a stable grip. View detail
Rim stripe easily affixed
Used for Rim stripe installation on YZF-R6 (2019).
When used for water pasting, Rim stripe can be applied quite accurately and effortlessly.
Some adjustment may be necessary where the rim stripe overlaps.
It is also Large cut to paste with Image to push out air bubbles. Removing air bubbles afterwards is also Large cut.
View detail
nonfunctional
I understand that you use a syringe to decompress the Tank and suck it out.
It does not work at all.
In the end, it was a normal Air extraction while holding Lever.
View detail
I would like it to be attached to Rim stripe if possible.
We have applied MDF rim stripe to several (5+) vehicles in the past.
I had to replace my car for the first time in 9 months, and when I tried to apply Rim stripe, I could not find a special Gauge to apply it, so I had to order it again from webike.
I purchased a 6mm width rim stripe and was able to install it without any problem using Gauge, but I would like to see it included or packaged with the rim stripe if possible.
I would also like to see 8mm and 10mm affixed Gauge produced.
View detail
Fairly soft
Purchased to quickly wash Tire and Wheel.
If the hose is connected, it can be scrubbed while water is running.
The hair is quite soft and is recommended for a smooth flow around the feet.
The hairs are likely to be defeated by mud, etc.
I received what I was looking for in Brush, which is a good system for this kind of thing.
View detail
Bottle will be dented.
I purchased this product because I wanted to do the Fluid replacement myself.
As per everyone's impressions, use a syringe to set the Bottle's air pressure.
If you lower the Lever, the Bottle will be dented.
It may be better to work while niggling.
View detail
For Wheel and air-cooling fins!
I have not used it in a car wash yet, but I think it is just right for cleaning fins on wheels and air-cooled engines because of the tautness of the Brush. The handle is long, so it will be useful for places that are hard to reach. I think the price is high, but it seems to be durable. Therefore, I give it 4 stars for texture and 3 stars for cost performance. View detail
The same thing as 100s?
[How is it used?
Used to apply or scrape off Remover in paint stripping operations.
Was the one you received as per Image?
Not possible and not impossible as per Image.
I noticed later that it is almost the same as the one sold at 100s?
Are they differentiated by Carbon content, etc.?
How was your experience with it?
Quite easy to use.
Remover is Gel-like and hardens after a while.
When applied with a brush, the tips of the bristles immediately harden and Large strange.
This Scraper can be spread on Beauty and is useful for scraping off the paint when it peels off.
[Points to note]
Paint remover also attacks resin.
Inevitably, the tip of the Scraper will be scraped off by the release agent, so it is practical to replace it with a new one after a certain amount of time.
View detail
Reliable Brand
[How is it used?
I purchased this to strip the Liquid Gasket when replacing the Generator cover on the Rokudabo. There were various approvals, but I chose this one because it was made by DAYTONA, a reliable manufacturer.
Was the one you received as per Image?
It was smaller than I expected, but it was usable enough!
How was your experience with it?
As a Scraper, I was able to peel off Liquid Gasket well, so I am glad for now. I think there are other uses for it, so I will continue to use it. I have only used it once, so I don't know how durable it is.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Easy to use
I purchased this product to replace the Screen on my New ModelPCX125 JK05.
I used it because it looks hard and Large strange to remove the nail when removing Garnish.
The hardness was perfect and very easy to use.
If you have one, I think it will come in handy in the future.
View detail
Just right for disposable
[How is it used?
Used to clean parts during Restore of TZr50R.
I bought it because the price was low and the tips of the hairs I had before were becoming stiff.
How was your experience with it?
It was easy to hold and use.
The small size also makes it easy to clean the smallest of areas.
However, it may not be suitable for cleaning Large objects.
How did it compare to other products?
Although the quality is much lower than the slightly more expensive Brush, it was great for a simple cleaning of the Sunday mechanic. Especially when it comes to Restore, these supplies are cheaper and larger in quantity than in quality.
[Points to note]
There are three types of bristle tips, but use them with caution, as they may damage parts if used incorrectly.
View detail
Fits: Others
It can be done without it, but it is convenient to have it.
Material mounted on casting wheel for tubeless tires:This tool is used to attach the Air Valve from the back of the Rim so that it can be pulled out when replacing the Air Valve of Rubber.
It is not something that can be pulled by hand, so it is necessary to use a tool with a Quantity:Set and must be pulled.
The workability is perfect because it is a dedicated tool, and Valve can be replaced easily.
However, if you are creative, you can replace the valve without such tools.
Net. 'Hit it from the back and push it in.' Although such methods are widely used, it is possible to pull it out using simple objects lying around in a tool box without doing such barbaric things.
I won't write about it here because it is not the proper way to do it, but it is not difficult if you observe it carefully.
However, the same Pull out." But as one would expect from a specialized tool, the ease of doing so is overwhelming.
Once Quantity:Once set, the No worries about tools coming off." This is the most Large.
If you are a do-it-yourself Tire changer and want to change the Air Valve at least once a year, you may purchase it.
Since it is cheap, w
View detail