Reviews
Fits: Others , HONDA REBEL1100, HONDA REBEL500, HONDA REBEL250
Recommended for vehicles other than REBEL
Since the vehicle has an exhaust system on both sides, we chose this bag with a short vertical dimension.
It took a little ingenuity, but I was able to install it with the included Belt.
I would be happy if it is possible to install and remove with One-touch if possible.
Considering security and prevention of falling off, the Belt type is probably the safest product.
The design is not too large like a leather bag and can be used casually.
No maintenance is required.
View detail
Fits: HONDA GROM, HONDA CROSS CUB, KAWASAKI Z125, KAWASAKI Z250, KTM 390DUKE, YAMAHA YZF-R25, Others
Compact
Compact and easy to install. Some modifications may be necessary depending on the car model, but I don't think it is that big a deal.
I usually leave it on since the capacity is sufficient for my needs, and although there is some concern about waterproofing, it is not a problem as long as the load is divided into small waterproof bags.
I like that it has sufficient capacity, is easy to put on and take off, and is not distracting.
View detail
Compact but sufficient capacity
I have been using a REBEL250 Left SideSide bag with a DEGNER 20Liter until now.
I was looking for something a little more compact and a little too large for everyday use, and I came across this product.
At 13 liters, it is not enough to go shopping with, but it is enough to carry Rain Wear and warm clothes.
There is one Slit inside and one Pocket outside.
The outer Pocket is helpful because there is no place in REBEL to store documents, etc.
I have installed it with KIJIMA's side bag support, and the holes for the support are a little wide, but not so much that it bothers me.
I am concerned about the cheapness of the Drink holder's construction, but I think it should be considered a consumable item.
Also, the texture of the synthetic leather looks cheap, so I thought it would be better to do it with a little Oil.
View detail
Fits: BMW F800, HONDA CB1300SB, HONDA CB400F, HONDA NC700X, KAWASAKI Ninja1000, KAWASAKI Ninja400, KAWASAKI ZX-14R, YAMAHA MT-07, YAMAHA YZF-R25, Others
Made as expected
It was made as expected.
Although not a feature unique to this product in particular, I like the ability to String adjust the amount by which the door section opens.
As a messy person who throws things in, it is helpful to know that the next time I open it, the contents won't be blasted out.
As a side note, I could not put it on my XSR700 without Bracket.
View detail
Large capacity than One Shoulder and comfortable to use.
The wide shoulder belt is easy to stabilize, and the fixed belt prevents the bag from gapping to the side of the body or stomach while riding. It is very good. This is a high point.
The cargo area has a surprisingly large capacity, and the rooms are neatly divided, making it easy to take out the desired items, which is very useful. Please refer to the photos for more details about the approximate capacity.
Although not mentioned in the product introduction, there is a pocket between the main chamber and the sub-chamber that can hold thin objects, such as masks and anti-fogging gloves, which is quite convenient. The best thing is that you don't have to open the Cover, peel off the Velcro Tape, and move the sub-chamber out of the way, but if you put your hand in the way, you can take it out with the Cover on.
If there is anything to be concerned about, there is a smell peculiar to Wet suitMaterial, so if you don't like it, you might want to be careful. I put the Fleece and Neck warmer in an airtight bag and put them in my bag to prevent the smell from migrating.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
That's the OEM Parts!
I wanted Side Back and decided to go with YamahaOEMParts.
There are less expensive ones, but I chose this one because of its design and fit.
As expected of OEM parts, the installation is also very exacting.
However, there is a sense of hanging on.
It is different from the hard case's clingy fixation.
I usually remove it, so I like that it can be easily detached.
It is convenient to have storage space.
View detail
Fits: Others , DUCATI SCRAMBLER, KTM 390DUKE, YAMAHA YZF-R25
Just the right size
With the Main SeatBack and Tank Bag, I can go for 2 nights with no problem, but this time I wanted more space for 4 nights and I found this.
The size was just the capacity I wanted, so it's really good!
The wind-up type backpack is not suitable for use in which it is opened and closed many times, so it is best to open and close it after arriving at the inn and when leaving the inn. If you open and close the back only when you leave your lodgings, there is no inconvenience. Miraculously, we did not encounter rain this time, so I do not know how waterproof it is, but looking at the construction, I do not think it will allow water to penetrate easily.
The size was just right, there was no difficulty in installation, and the installed visual was just like the Image. I am satisfied!
View detail
Bag ideal for off-road vehicles and MOTARD systems
It is permanently installed on a KTM690SMC-R.
Exhaust System Up Type off-road motorcycle, MOTARD, etc., exhaust heat from the silencer side melts the bag, so it is personally troublesome to install the bag on both SIDES.
This product can be mounted on the opposite side of the Silencer, is easy to attach and detach, and its size is ideal for light storage for day to overnight touring, making it easy to install and use permanently.
If you are so inclined, you can buy another one and use both SIDEs while taking measures against heat exhaust, so it is highly universal.
Waterproof and durability are not as good as Enduris Tan, but the balance of price and usability is high and I like it very much.
View detail
cool
It looks cool.
I don't know about Waterproof performance because I haven't run in the rain yet.
View detail
CinderellaFit
CinderellaFit on YamahaRENAISSA, which has no load capacity.
The reverse side Belt, which was not in the product description, was Exactly and securely fastened to the OEM Seat rail. I had no problem on the highway.
I was having a hard time finding a Bag that would fit my old Motorcycle. I should have gone with this one from the beginning." I regret it. I am satisfied enough because it is cheap and cool.
View detail
YAMAHA Soft Side Bag
Thanks for the speedy shipping and very good packaging. Very Authenthic product About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing . And I recieve it in Good Condition execellent quality . Authenthic product About the feeling of use Products to buy together Difficulty of installation Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasingAbout quality and texture About the feeling of use About Design About Size Chart Cost performance and comparison with other products About shipping and packaging Any concerns, cautions, or advice when purchasing View detail
It was just what I needed.
It is sufficient if you are only carrying the bare minimum of luggage for a night or two.
The weight is not a concern, and the installation is secure.
View detail
Fits: HONDA GB350, HONDA GB350S, HONDA CL250, HONDA CL500
For vehicles equipped with SW-MOTECH's SLCCarrier
I installed SW-MOTECH's SLCCarrier, but when I tried to buy a bag, I found many sporty bags from manufacturers, so I was looking for a Casual and Small size bag and came across this product.
It is actually easy to use and I am very happy with it. Please note that this product is available for Right Side and for Left Side.
View detail
Affordable
This messenger bag / saddle bag is an affordable option if you're looking for just a single side. Decent quality construction and perfect size for some extra tools or a rain jacket. Only downside is that it doesn't seem to do well against a steady rain. View detail
Functional.
I installed it on my xr250BAJA. It was able to use it without interfering anywhere. The loose fit is stable and does not come off when touring on rough road surfaces in the woods. In fact, it may be easier to use than the HardPannier case when driving on forest roads. However, the capacity is small. It is enough for the amount of luggage for one-day ramen touring in forest roads. The fabric is thick and sewn well, but it is not waterproof. View detail
For those who want a little more luggage in their Touring!
I used it for touring in Hokkaido and Kyushu and when I went back home.
I had installed it on my NINJA2 Helmet50RR,GSX400 and it was very useful and easy to use.
Bought it brand new, been using it for almost 4 years now, and still nothing has broken! It's still working lol.
The Zipper system makes it very easy to open and close! It is easy to install and can be used for various types of cars if you are creative.
I lent this to a junior who is going to Hokkaido. It is an old motorcycle, so I lent it to him so that he can pack his tools well enough to fix it in case of minor breakdowns.
View detail
It's a very expensive bag........
I was surprised when I saw the price.
It is that expensive.
But is it actually an OEM of SW-Motech, or is it very well made?
Fitting with the Carrier is excellent and the stability of the luggage is great.
The capacity is just right for a change of clothes and souvenirs for an overnight touring trip, and I would use TA-Q-BIN if I have more luggage.
It is Exactly for the SportsHeritage design of the XSR900.
However, it is quite expensive, so think carefully before purchasing.
View detail
Fits: Others , SUZUKI DL1000 V-STROM1050, HONDA CT110, YAMAHA TENERE700, SUZUKI V-STROM250, BMW R1150GS, HONDA CB400SUPERBOLD'OR, HONDA CB1000R, DUCATI SCRAMBLER, KAWASAKI NINJA250, YAMAHA XSR700
Easy if you do the Belt Setting first.
Installation on SV650.
I decided to buy it to protect against sudden rain during long touring.
The clearance with the exhaust system is also sufficient. If the length of each fixed belt is adjusted at the beginning, it is easy to install afterwards.
If I may say so, I thought the Belt for closing the opening was too long. This is a minus point because other fixed belts had a flapping prevention system for the excess part.
View detail
Nice bag
It's smaller than what I had initially expected but I enjoy it very much nonetheless. It's great if you want to clear out your pockets and get at most 2 small bags of groceries. I like how it looks a lot just don't expect to carry much inside. View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Mounted on YZF-R6
I saw the Side BackBracket for YZF-R7 on the market and bought it together with the bag to increase the load capacity since it looked like it could be installed on the R6 in terms of design.
https://www.webike.net/sd/24981150/
The problem of loading for practice sessions etc. was solved because it was successfully installed.
CONCLUSIONS:
- Spacer can be installed. Bracket can be attached by removing the Spacer.
- Slightly hits the blinker, so adjustment is necessary when the bag is attached.
- Helmet holders can coexist depending on the item.
The design of the Cowl is slightly different, or it is necessary to put a Spacer between the Body and Bracket.
This time K-CON Aluminum spacer collar (φ8.2/20×5) To Quantity:Pair (for Left and Right) In Quantity:1 Set of 4pcs. used.
https://www.webike.net/sd/1343095 /
AGRAS Helmet holder( https://www.webike.net/sd/23562969/), but coexistence can be achieved in a manner of speaking if an additional Spacer is bitten.
Additional. (φ8.2/20×10) If you add the two collars of "Limit", the Bag and Blinker, Helmet holder and BagBracket will interfere a little, but Limit can be installed.
Adjust to your liking, but note that adding color will shift the bag position downward and interfere more tightly with the blinker.
View detail