Reviews
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Monster 1200, DUCATI Monster 821
To protect the LCD screen!
I installed it to protect the screen of my LCD Meter!
It took a little bit of work to make sure that Dust doesn't get into it when you put it up, but it's a good idea to put it up without Dust in one shot I was able to!
The clarity is good and the way Meter looks is fine
View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Refreshing around the rear!
I installed it on my Ducati SCRAMBLER
I'm glad to see the rear area refreshed so much
The installation process was very easy and only took about 10 minutes
View detail
Fits: BMW S1000R, BMW S1000RR, BMW S1000XR
You can't even see that it's attached
I bought this to prevent scratches and it is so beautiful that I can apply it without air bubbles and you can't even see it
There is no problem with this type of product, although it has the drawback of getting air bubbles when it is applied
The other thing is that it's degrading over time
View detail
It's so natural, like it's supposed to be on!
The Radiator core was damaged by Large since the purchase of the Deke, so I had to use the Guard I bought it because I wanted to put it on
There were silver and black, I was confused, but I chose black
The installation process is quick and easy with only 4 nuts to remove and install
I think it's strange that it's not on to begin with It's so good that I think it's a good idea
It's a little sad that I don't feel like I've blended in too well and put it on
The price is a bit high, and if it comes in under 10,000 yen, full marks to you
View detail
Fits: DUCATI MONSTER 1200, DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER 1200S
Good only in use
It is a rare motorcycle called MONSTER S21200Setc The lack of explanation of the Instruction Manual is a big no-no Because the point that should be the point is not written, many times it is impossible for an amateur to put on and take off the bike It's not easy for an amateur The fit is good Because it is covered by the tail lamp a little, it is the best if it is lowered 1cm later Because there are too many screws, I am worried that it may fall off one day It does its best by tightening the screws View detail
Fits: DUCATI SCRAMBLER URBAN ENDURO, DUCATI SCRAMBLER ICON
Convincing Products
It will be installed on the 2019 New Model SCRAMBLER Icon
When I checked with the manufacturer, they said it would fit the New ModelIcon Purchased
I can't wait to install it because the rear area is Refreshing
View detail
Fits: DUCATI Monster 821, DUCATI Monster 797, DUCATI Monster 1200, DUCATI SUPERSPORT 950, DUCATI SUPERSPORT 950S, DUCATI SUPERSPORT 939S, DUCATI SUPERSPORT 939, DUCATI Monster 1200S
Blinker from Ducati Performance cannot be fitted
The texture of the product is very good, there is very little BALI! (There is a little BALI in the drilling part.) 。 However, because of the Bolt's method of fixing the Blinker, the DucatiPerformance Blinker cannot be installed View detail
Neatly organized around the rear
It took me a while to remove the OEM Fender? Refreshingly, it's nice to see the License Plate Light connected We need to do some processing, but I've been using commercially available Waterproof I changed to Connector and made the coupler to insert and remove the license plate The Cable of the License Plate Light of the product is short, and I am worried about the cable of my F4 In the event that the engine cannot be retracted to the body (under the Tandem seat), the Exhaust There is a hole for the Cable in the SystemCenter area, and the Connector section comes in the hole for the Cable It's not a good idea Cable length should be 15-20% longer than that of the original It's a good way to get it delivered View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
essential
I felt that SCRAMBLER was difficult to take out Side Stand, but I was able to make Stand End I thought I could manage to put it on, but in the end I couldn't, so I installed it after a while since I bought it
After I installed it, I wondered why I didn't install it sooner..
Installation is a Universal Product, so some tolerance is needed, but it is not necessary to tighten it I thought there was a possibility of loosening even if I got into it, so I made STANDBody to prevent rotation I applied Locktite to prevent it from loosening
View detail
Fits: DUCATI SCRAMBLER, DUCATI SCRAMBLER
it is better to have it than not
It was originally a used car body with Wound on it, but I bought it so that it wouldn't stick any more!
Adhesion was able to be done easily with adsorption, but the edge where Clearance is large is a little empty I think it's necessary before Wound causes diffuse reflections and makes it hard to see
View detail
Fits: KTM 125DUKE, KTM RC125, KTM 200DUKE, KTM RC200, KTM 250DUKE, KTM RC250, KTM 390DUKE, KTM RC390
I'm not sure if I should have
It's a protective film!
This is an impulse buy
It's SiliconFilm, so it's less sensitive than Glass
Cost is also reasonable considering the screen size
Is it a UV protection? In the hopes that..
View detail
Fits: DUCATI 1098, DUCATI 1198, DUCATI 848, DUCATI 1098, DUCATI 1198, DUCATI 848
Helpful Items
Because there is no SIDEStand Hook on the motorcycle that I purchased, it is a substitute for Size I bought it after checking only
It's not pushed as a compatible car, but I managed to install it safely and it's easy to put the Side Stand in and out It's easier now
To be honest, I was worried about the tapered shape of the tape to make it fall off, so I decided to stop the hexagon nuts of both SIDEs from loosening Quantity from the back part as it looks like a Nut:Screw lock was applied to Set Fixed Bolt
Because it is a product that does not have a welded structure and is light, the side stand can rattle when there is a slight difference in level I've been able to use it comfortably so far without dancing, so I'm evaluating it with high hopes
View detail
Repair Parts that you may want to have
I installed KIJIMA's Fender Eliminator Kit It does not have the original markings (triangle markings) I bought it from We-Big because I liked the shape of it and it is co-tightened with Reflector But because the bracket part was long, we re-drilled the hole and cut it short In addition, because it was vertical, it is bent to fit the angle of Number View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
For cars without a Hook
When I changed to a car that didn't have a hook, I scratched my foot where it was located That's the merchandise But when I put it on the top, it's hard to get it out due to Lever's principle
At the bottom, you'll end up scratching that area
Screw lock should be attached
The Hook part looks a bit bent …Stainless Steel Hey
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S, DUCATI Monster 1200, DUCATI Monster 821, DUCATI Multistrada 1200, DUCATI SCRAMBLER, DUCATI STREETFIGHTER, DUCATI Monster796, DUCATI MONSTER696, DUCATI MONSTER1100/S
Although it is not troubled even if it does not need it but a little convenient if there is
It does not mean that the performance improves, there is not a Dress-up effect
No need to worry about it without it ? ? ? But if there is something that is a little useful Items.
The front of Side Stand is just a bit out behind the footpeg
I thought that it was hard to put out from before, but thanks to this product
A little Stress when stopping is gone.
For installation on SuperSport S you have to reverse Screw and Nut
Something's Parts (QShifter?) Since it interfered with it, caution is required when installing.
Also, confirmation of the mounting position is necessary to be done with the Side Stand raised
Because there is no Center Stand or Maintenance Stand, it is a little Large strange.
After installation, I have only gone 1 to 2 times yet
I confirmed Screw and Nut I was able to confirm looseness.
I plan to regularly check loosening, but if you feel relaxed
We are planning to consider using anti-loosening agents.
View detail
Fits: KTM 125DUKE, KTM 200DUKE, KTM 250DUKE, KTM 390DUKE
Recommendation
OEM's Rubber footpeg
I do not dislike it
Rather, I like it
It is more oblique than the image of yourself
In my opinion, Knee grip is hard to do
there
By changing the footpeg, if it gets in a favorite ride attitude and it is easy to ride
And purchase
Items remain in their OEM position
There are three moving ranges of 15 mm and 21 mm
It is also a very satisfactory product because it has a good texture, hesitates to stretch, so you can set it to your favorite Position
View detail
Fits: DUCATI HYPERMOTARD1100/S, DUCATI Hypermotard796, DUCATI Hypermotard821, DUCATI HYPERSTRADA, DUCATI MONSTER1000, DUCATI MONSTER400, DUCATI MONSTER620, DUCATI MONSTER750, DUCATI MONSTER800, DUCATI MONSTER900, DUCATI Multistrada 1000DS, DUCATI Multistrada 1100/S, DUCATI GT1000, DUCATI SPORT1000, DUCATI MONSTER S4, DUCATI SCRAMBLER, DUCATI Multistrada 1200, DUCATI Monster 821, DUCATI Monster 1200, DUCATI DIAVEL
It might be very easy
Previously I was wearing an external footpeg, but GizaGiza (sweat) Because it was small and slippery, it was replaced. This footpeg does not slide at all in Boots, and as a result long-distance Touring makes feet easier. View detail
Fits: DUCATI MONSTER 1200S, DUCATI MONSTER 1200, DUCATI MONSTER 1200R
Cost is the performance is high
Many of Ducati's custom parts are expensive, but this product is standard made and Cost performance is high.
Of course, the protection performance is enough.
View detail
Fits: DUCATI Monster 1200, DUCATI Monster 821, DUCATI Monster 1200, DUCATI Monster 821
To protect the Meter screen
It is the same as Smartphone screen protection Seat.
There is only Exclusive Design and the shape is well-organized.
Since it is slightly smaller than the Meter screen, attention is required for positioning, but transparency is also high.
Although it was easy to paste, I felt it was a bit expensive.
View detail
Fits: DUCATI PANIGALE, DUCATI PANIGALE
It was finished as expected.
Since it is exclusive for car models, the shape is Exactly, although gaps can be made slightly around, protection of the smartphone and the same etc. I am satisfied because it's Size feeling.
Slightly scratches on Meter surface and polished until it became inconspicuous in Compound, it became a cloudy feeling only for that part, but because it is a non-glossy type, that part became inconspicuous after pasting.
I made it a MeterSingle Body and I got a water bottle so I could stick it neatly without entering it, but I think that it is difficult to leave it on the vehicle. Since the protective Seat to be peeled off at the end is unexpectedly powerful, Body is also hung over when peeling off. Attention is necessary when peeling Protection Seat.
In terms of CostPuff performance, the quantity sold for exclusive use in cars is also different, so it is hard to be as good as a smartphone, but you can not deny a little high sense!
View detail