Reviews
Good design, strength is sufficient with resin, used as a bag decoration.
[How is it used?
Material:PlasticKey Holder。
It is not heavy, but it is too large for a key holder, so I think few people use it as a key holder.
I have it attached to my Waist Bag as One pointItems.
It has a Carabiner mold, but it doesn't seem to be able to withstand the weight.
It is useful to use it as a Key Holder Holder when you get off the Motorcycle.
Was the one you received as per Image?
It was lighter than expected but the texture is not bad.
Material:There is no BALI or distortion as is common with Plastic products.
How was your experience with it?
1, Waist Bag Accent.
2, Holder of Key Holder.
3.Holder of Gloves for summer and summer.
I use it for the above purposes.
No complaints at all.
[Points to note]
It comes with 3 Rings, but I don't recommend using all of them.
The whole thing is too long.
If you use all 3 Rings and use it as a Key Holder for your Motorcycle, you can use other Quantities:2pc may damage the paint on Motorcycle Tanketc.
*Outside diameter of carabiner part is 7.5cm
Internal diameter of the carabiner part is 5.5cm
The three rings are 1.7cm long.
How did it compare to other products?
If you use it as a One point Accent, not as a Key Holder, I think it is a very good item for Parenthesis.
Since it will not be used as a Key Holder, the 3 Rings will be removed after this imprementation.
Green part (Material):(Rubber) may be damaged by this Ring.
View detail
It's a larger than I thought it would be
I don't like to put my keys in my Pocket during Touring.
Because they can be dropped or stuck in the skin.
But I want to wear it, so I use Carabiner.
The cheap ones tend to ruin the return spring quickly. I had to replace them several times.
This product is decorated with the Kawasaki logo.
The cost of the Logo is worsening, but that's OK.
It was a larger size than I had expected.
It would be easier to use if the size were smaller.
View detail
![Key Cover [Key less Ride]](https://img.webike-cdn.net/catalogue/images/53229/44115-900_01_web_TS.jpg)
Fits: BMW R1200R LC water-cooled, BMW R1200GS LC Liquid Cooling, BMW M1000R, BMW R1200GS LC Adventure water-cooled, BMW R1200GS LC Liquid Cooling, BMW R1200RS LC water-cooled, BMW F900GS, BMW K1600GTL, BMW K1600GTL, BMW K1600GTL, BMW K1600GT, BMW K1600GT, BMW K1600GT, BMW R1250R, BMW R1250GS, BMW K1600B, BMW K1600B, BMW R1200RT LC water-cooled, BMW K1600 Grand America, BMW F900XR
I wonder if it will get better with use.
It will be the only Cover for BMW Motorrad's Intelligent key, and there is certainly no other choice.
Nubuck is used and the texture is good. If you blend it with Mink oil before use, the texture will become even more moist, and you will probably get used to it as you use it more and more.
this time Brown. The fit with the Intelligent key is good and it is easy to get the key part out.
However, the IntelligentKey cover for Car has a similar Material and a little less expensive.
View detail
Lightweight, Motorcycle-friendly Material
[How is it used? For ZOOMER
Was the one you received as per Image? high
How was your experience with it? Good, lightweight, Motorcycle friendly.
[Points to note] Durability?
How did it compare to other products? Unlike Gold products, the sound upon contact is not bothersome.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Very cute!
The large size does not get in the way when worn, allowing for a very casual CUBAppeal.
I also like the large size and color, and the fact that the stains don't seem to stand out.
This time I purchased it with my WebikePoints that I had saved up.
I think Items are just right for the purpose of Point consumption.
View detail
I want to have room for key storage.
The Hook closes at the limit, but I would like more room. Good design, quality, and cost performance. View detail
Material is soft and good. Gentle to the car body.
[How is it used? It is easy to use.
Was the one you received as per Image? Yes.
How was your experience with it? It is light and SoftMaterial, so there is no Gold genus sound.
[Points to note] Worried about strength?
How did it compare to other products? I think it's good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
For MONKEY125 key.
The reverse side has Honda logo embossed on it. The material is PVC, so it's good that it won't scratch around the key cylinder even if it's attached to the key of MONKEY125.:Too bad it is only available in Yellow color, because my MONKEY125 is Red color. View detail
Slightly Large to prevent malfunction
I am using Smart key for HONDA ADV150.
Originally, we were using OEM Product's LeatherSMARTKey Holder with window.
The pressure in the bag causes the Lock button to be pressed and held down.
I got marker- status in Helmet in.
Wallet and house key could not be taken out together and it was a Large disaster.
We wanted to avoid any malfunctions in the future, so we purchased this product without a window.
Compared to the last one.
The inside and outside diameter are both one size larger (originally designed for the CBR1000RR-R Smart key).
With Smart key for ADV and for PCX, there is plenty of room on the inside and it moves slightly inside.
The sense of luxury has increased considerably.
Malfunctions due to physical impact are likely to be completely preventable.
This is how it is done.
It is no longer a key, but takes up a good deal of volume.
Smart key is acceptable because I leave it in my bag.
I am satisfied because I feel that I no longer have to worry about malfunctioning markeroo.
View detail
It gives a sense of gravity.
I didn't want the Smart key to be scratched if it was left naked, so I bought the one from KITACO, which is now being sold by FOR JAPAN MODEL.
I was able to install it without difficulty, and I am satisfied that I made the right choice in selecting Gun meta, as the anodized peeling was not noticeable.
As I put in the picture, it is a bit of a hassle when replacing the battery.
View detail
No Packageetc.
Since my motorcycle is a manufacturer in Italy, I bought this one with Italian colors.
I am undecided whether to replace the Grip with ProGrip, but when I put the key on it, it was just as I had imaged before I bought it.
They go very well together. (Self-sufficiency)
The main part is made of rubber, which will minimize scratches on the car body.
Both sides are designed so that it doesn't look cheap, yet
The price is very reasonable.
View detail
Key Fob Case
Size feeling is Exactly
Good texture.
View detail
Fits: HONDA PCX150, HONDA FORZA(MF13E), HONDA SUPER CUBC125, HONDA X-ADV, HONDA PCX
Not that there is anything wrong with this product.
The ADV150 Smart key was placed in this product, stored in the bag, and stored under the Seat.
The Lock button is pressed and held for a long time to disable it when the luggage is hit.
The name of the company is AoWhite.
Large disaster because the bag also contained Wallet and house keys.
It was still better because I was on my way home from a holiday, but it sent chills down my spine to think that I had been on a trip or at work.
(I checked after the fact and it was still a contact malfunction lock, not a dead battery.)
Frankly, Motorcycles, unlike cars, are easy to tell apart.
Originally, the effective range of the Smart key was also quite narrow.
Considering the Risk of malfunction, I would have been happier if Answerback and ON/OFFButton were not needed.
Therefore, I now use a Smart Key Case that covers the entire surface from this product.
View detail
![GOLD WING Smart Key Case [HONDA X DEGNER]](https://img.webike-cdn.net/catalogue/images/66479/0SYTZ19CRF_02_TS.jpg)
Easy to use
It is easy to use by just hanging it on Pants.
I like not having to look for where it is.
Highly recommended for keyless entry.
View detail
It was good
It was good. Easy to use. View detail
You can lock it with Screw.
I purchased this due to the expiration of the Point.
And it doesn't hurt to have it.
It is safe and convenient because it can be locked with Screw.
I like the matte colors again.
View detail
Securely lockable with Screw.
I purchased this due to the expiration of the Point.
And it doesn't hurt to have it.
It is safe and convenient because it can be locked with Screw.
I like the matte colors again.
View detail
Simple leather Key Holder
As a motorcycle key holder, it is neither small nor large in size.
However, I think it is difficult to put the Motorcycle key in the Ring.
The leather part is black, and the YOSHIMURA name doesn't stand out much, which is a pity.
But I think it is a good Key Holder with Simple construction.
View detail
fashion-conscious
It can be bought together with Motorcycle's Body color to create a fashionable look.
The ring part is solid, so it is safe to attach multiple keys.
The body is made of silicon, a soft material that will not scratch the cylinder area.
View detail
Wow that's cool
The design of MORIWAKI's Emblem is also well parenthesis, and the high quality of the leather gives it a luxurious feel.
The overall impression is that it is carefully finished, so it is satisfactory as a Key Holder.
View detail