Reviews
Retro feel is good.
The material of the Key Holder is soft and will not damage the keyhole.
The design is also good with a retro feel.
View detail
cute little
Used as a Key Holder for key differentiation.
Since the material is Rubber, it will not scratch the keyhole.
View detail
I like the way it looks.
[How is it used?
I wanted a carabiner to attach caps and other items when touring, and I was looking for a variety of carabiners, and this one had a good design.
Was the one you received as per Image?
The main part looks like Plastic, and the part that says Honda is Rubber's Cover.
How was your experience with it?
First of all, I like it because I like the way it looks. Of course, it can be used as a normal carabiner, and since it is not made of gold, I have the impression that it does not bother me so much when it hits the car body. One thing is that the movable part of the Carabiner moves too easily, so I wish it were a little more solidly made.
[Points to note]
How did it compare to other products?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
I purchased the product before it was discontinued.
Because the position of ZMain key is a special place called TankFront, I have substituted for VehicleKey case for prevention of wound, but it is too large and heavy and often gets caught around Steering.
I had been driving with the Main Key at the practice site and on the course, but I still had the impression that I was a bit concerned about touring and city driving, and I was thinking of making the Simple and Small Type lightweight in the near future.
I happened to find a Kawasaki Attachment product at a local store, and it was close to what I was thinking of, and almost the best, but the Green Light was sold out and the store was planning to deliver it? However, the Green Light is sold out and the shop is planning to deliver it.
I checked and found it in stock at Webig! The actual product I received was a solid and beautiful finish and deep green light for floor leather, and the inside is a shiny lime green tone with a cloth material that seems to be resistant to scuffs and scratches.
Main key, Helmet holder key, etc. I am currently using a total of 3 types of keys.
Incidentally, the Main Key is used without storing it because it has a key attachment made by Kijima.
It is also comfortable to use, simple and unobtrusive, and it is hard to get wounds around the main key of the tank part.
View detail
ct125
search webike
I ordered a curve keyring.
Small and cute just like the picture
It goes well with the Hunter Curve. I ordered it together.
Raincoat and Kumamon Yoshimura Backpack
I like them all, the price is good and the quality is also good
Actual photo attached
Take care and prosper
I ordered another product, but I want to get it ------------------------------------------ ---------------- Webike I ordered the curve key ring It's small and cute like a picture It goes well with Hunter Curve. I ordered together Rain and Kumamon Yoshimura Backpack Everyone likes it all. The price is good and quality is good Licent photo Please look pretty and flourish I ordered other products, but I want to get it. Powered by Google Translator
View detail
just right
Key Holder for Motorcycle.
Silver and not too assertive, just right.
I don't drive a NINJA, but it is a Kawasaki vehicle.
View detail
Short
The long and thin Type of the same brand that I had been using for a long time did not fit well in the vehicle I switched to, so I replaced it with this product. View detail
I was thinking that someday I would like to have an RR-R!
Honda, which had been suffering from a series of defeats in the SBK and Suzuka 8-hours endurance races, decided to break out of this situation by introducing the CBR1000RR-R LaBust. View detail
Charm and dignity due to its modesty
I had a Smart key in an OEMTradCase and a more fancy Key Holder.
I bought this one because I thought the name on the car body didn't match the atmosphere of the car body ….
Silver and black colors, simple shape, chic design, small and thin, so it won't be bulky even if you carry a smart key in your bag.
I have it on my Overnighter when I get home and it looks amazing when placed side by side with the Stainless Steel + Black dial clock.
I think Silver and Black (especially leather) are men's favorite iron plate. For the price, I am very satisfied with this product. I think there is a high possibility that people will think it is fashionable when I show it to others.
View detail
Good for the One point of the key.
It is well made down to the smallest detail. I like it as one point.
Since we have three CUBs, it is very useful to have a PVC Key Holder for each of them so that we can easily identify which CUB the key is for. Actually, each of the three CUBs has a different key size and design, so I can tell them apart even without the markers. (Lol)
View detail
Leaks.
[How is it used?
I ordered a Kawasaki Key case because it is a Kawasaki car, and the color is Green Light to match my car. The color is Green Light to match my car body.
Was the one you received as per Image?
I purchased this product with the understanding that multiple keys would be able to be installed just by looking at the catalogue. I did not check the key hook inside.
How was your experience with it?
I immediately tried to use it in Touring, but a problem occurred. The key of the security good locked inside leaked out. No matter how many times I tried, it kept leaking out through the gaps in the leather. I chose a cover type key case to prevent scratches, but it was no good at all. When I looked at it carefully, I found that (1) the key was too small and leaked and (2) the hook on which the main key was hung pulled the key to the ring, and the key was pulled out along the way.
[Improvement Point
So, I bought another Ring (made of Stainless Steel, less than 100 yen at HOMSEN) to make the Main key independent. I bought one more Ring (made of stainless steel, less than 100 yen at Homesensee) and put it on. As a result, it looks good without leaking other keys. I don't use it very often, but the Belt hook works well. Now the KawasakiBrand is protected. (Lol) PS:By the way, the main key is left out.
View detail
Key Holder replacement
[How is it used?
The Honda Key Holder that was attached to the NS-1 Key broke, so I bought a new one.
I really wanted to use the same Key Holder, but it seemed to have already been discontinued.
Again, I looked for a Honda Attachment and decided on this Key Holder.
Was the one you received as per Image?
The size of the Key Holder is just right, simple and cool.
How was your experience with it?
I have installed several keys such as Motorcycle Key and Garage Key on the Key Holder and it is easy to use.
[Points to note]
I haven't gotten it wet with rain, etc. yet, but if it gets wet with water, the color will likely fade,
I try not to accidentally leave Key on when I wash my car.
How did it compare to other products?
Compared to other HondaAttachment products, the price was reasonable and it seemed easy to use.
I tried this way.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
nothing special
View detail
MORIWAKIParts for hardened Motorcycle
Very solid and more manageable than the key Single Body.
If it is hardened with MORIWAKI's Custom parts, it is good to be an additional Accent even if it is just inserted.
View detail
custom key
I thought it was long when I saw it in the picture, but it's really good when I actually received it. The finish and quality are good, and I also really like the way the connection and materials are made. It's a little disappointing that tools are not included. But even taking that into account, it's really good. Recommended if you want to create a special key. -------------------------------------------------- -------- From the picture, it was a long-awaited family, but it was really good to receive it. The finish and quality are fine, and I like the combination and materials very much. But it's a bit unfortunate that the tool is not included. But it is really good considering it. Recommended if you want to make a special key. Powered by Google Translator View detail
Fashionable genuine leather Key Holder
The leather part of the Key Holder is approximately 9cm in length.
It may be the design of the feather. It is 3mm thick, solid, and quite nice.
View detail
Surprisingly Well.
It is thick, not too small, and quite nice.
It looks much whiter than the Page photo, but I'm looking forward to seeing how Tan's color will fade as it is used.
Also, the Bracket Spec. is different from the Page photo, and the Button and Snap have the “DEGNRE” Logo on them, and the texture is upgraded.
(The key ring is not shown in the UpRoad photo, but it is included.)
View detail
It's usually very convenient.
I had bought a leather cap from DEGNER, but unlike the cloth cap, I could not throw the small cap into my bag, so I was wondering if there was something better. I am satisfied with the texture of this product made of leather, and I think I will continue to use it because it is usually convenient. View detail
Large than I expected
Since the area around the main switch is painted black, a normal key holder would peel off when another key hits it, so I bought this one that can wrap unnecessary keys.
However, this does not mean that the body is completely protected, as there are parts of the body with Rivet or Rings that belong to Gold.
The ultimate solution seems to be to insert only the Main key.
View detail
Cool! But...
The design is as good as the picture and the texture is satisfactory.
However, I am slightly concerned about the weight.
I don't think I need to worry about it, but I use it FOR Vehicle because it is noticeably heavier than what I have been using.
We are very satisfied with the Parenthesis quality.
View detail
Cute Cap Holder
It looks cute, but it is also outclassing in practicality and can be used to attach a capetc. on hand to the bag.
It is convenient to carry Cap even on Motorcycle without loading.
It looks Good!
View detail