Reviews
ApriliaRS660 Protection film
I tried to stick it on the front part first, but it did not stick well. Air enters.
It was not possible for an amateur to do it, I got frustrated with the Front section and conclusively did not put it all up. I think it would be better to have a PRO person do it.
View detail
Expectations for effectiveness.
I painted a tank and added a stripe on the cutting sheet to protect the area around the ferrule cap. It is very soft, so it is difficult to apply, but if you apply it with water, you can position it relatively easily.
I checked the adhesive strength with a scrap piece of wood, and it was quite strong and did not leave any marks when peeled off.
You can put it near the Key cylinder.
View detail
To prevent scratches
My commuter CUB has a white undercarriage, and before I knew it, it was covered in scratches and dirt from getting in and out of the car (tears).
It's been six months since I started riding, and I'm still looking for items to prevent scratches and stains, and I found this Film.
Quantity:I cut the 1pc. seat into three pieces, one for the main foot, one for the side of the Shift Pedal, and one for the bottom of the keyhole.
It's not impossible to do it by yourself, but it was smoother to do it with two people.
The surface to be applied is slightly curved, so one person should hold the edge of the seat while the other person pulls it to get a good fit.
If you make a mistake, you can reapply. Even if bubbles appear, they will disappear if you press down while stretching the top with a towel.
All in all, I think it's an easy Film to use, even for a beginner or a bit of a klutz!
I've been using it for about a month now, and it hasn't come off or anything.
I'm glad I bought this product because it doesn't make the area where I put it look bad.
View detail
Wound measures for side bag mounting
It's not a special feature, but if it's a loose curved surface, Seat will extend and follow it. 。 However, because I got the point at the last minute, Wrinkle entered in the middle! 。 When it deteriorates, I will buy the same one again. View detail
Protection.
I bought this to prevent scratches on my Tank.
Good abrasion resistance, good price and good as a protective Seal.
It also seems to be good for other parts of the body, so I put it on the parts I want to prevent scratches.
View detail
Flexible and easy to apply
The rope inevitably comes into contact with the Cowletc. when the Bag is strapped to the Seat when camping touring, and abrasions are attached. Although the contact part with the Cowl was cured with the curing tape every time until now, when the tape was peeled off, even the paint was peeled off together. I thought that this was not good, and this time I cured the Cowl with this product. Because it is a product of the purpose of course, the appearance was also neat, and it was able to achieve the purpose. However, I think that the price can be a little cheaper. I used this product on a previous Motorcycle at Repeat, and even after 10 years, it has not yellowed or hardened, depending on storage conditions. View detail
for peace of mind
I bought this to prevent scratches on the body when loading luggage. I don't want to scratch it unnecessarily, but I also don't want to throw away the feeling that it is used moderately, and honestly, I feel that I could have done without it. View detail
To prevent scratches.
I bought this to prevent scratches on the area where the Fuel Tank and Seat meet. If you put it on a new car, it will prevent the seat from rubbing by removing and riding, so it is Recommendation. View detail
It is effective in protecting the painted surface.
I'm sticking it where the Fuel Tank and Seat are interfering with each other. [Color] This is a clear, transparent tape that doesn't feel like it's being used and protects the painted surface. The seal is easy to apply to curved surfaces and is very effective in preventing scratches. View detail
Good product
This is a great product for the protection of the tank and Seat Cowl. It's a thin and soft material and can be attached to a bent area by heating it up. I'm not sure if this is the right product for you. I think it's a good thing that you can cut it into any shape or large size. View detail
It is effective in preventing damage.
There are various types of Tank Pads, but if you stick a Tank Pad on it, it will destroy the design of the Tank, and if you prefer not to stick anything on it, I recommend you to stick it on.
Transparent [Color] The clear film is inconspicuous and scratch resistant.
View detail
The curved surfaces are difficult and take some getting used to.
I bought it because I wanted to protect my tank from scratches without compromising the OEM style.
Greedily "Quantity:Let's put it nicely in 1pc. I thought it was a bad idea and failed to paste it.
The curved surfaces seem to take some getting used to and hang.
(If you search the web. while wetting it with misting. . etc.)
I couldn't reapply it, so the failed Seal was wasted.
Did you learn a lesson the second time around? Without being greedy, I divided Seal into several pieces and applied it successfully.
If you put it on, it won't be so obvious, and Seal is thick enough that it's not too thick.
It's good for protecting you from scratches.
View detail
Expected
It is used for Helmet, not MotorcycleBody.
When using the Helmet Lock, I was worried about the scratches on the part of the body where the Helmet meets the body, so I used it to protect that part.
So far, it's not peeling or tearing and it's protecting me properly.
Large Satisfied
View detail
Good for protecting, but too thick?
I bought it to prevent chafing.
Cut and paste it with scissors, but because it is quite thick film, it peels off when you paste it on a curved surface.
In terms of thickness, it seems to be quite strong against rubbing, etc.
I think it is suitable for use in the chafing of the strings when the SeatBack is installed.
In terms of quantity, the size is enough to cover the required portion of 1 Set for 1 Vehicle.
I'm giving it this rating because it's not very convenient to use because it just comes off.
I think it could be a little thinner.
View detail
Stretchy and easy to apply
Because I put the Side Back on WR250R, I put it on the ZERO-GSide cover
Side cover for construction curing Tape first, and then the pattern production in Magic from that
Cut the curing Tape off well, sticking it to Protection film as it is
Although it is water-based, it stretches very well and can be applied beautifully even on curved surfaces
However, ZERO-G is matte finish, so you can understand that the place where you put it on will be Luster But..
A matted Film would be great too
It is very easy to fit on a curved surface and is recommended to stick it before it gets scratched
We'll see how durable it is, but if it gets damaged, we'll reapply it again
View detail
It's hard to stick it on
If you put it on Tank Bag, Seat Bag, etc., where it will rub against the exterior, it will be very effective in removing scratches It can be prevented
This product is a non-removable type
It is obvious that the exterior itself will not be scratched, but the Seal itself is also scratched due to its soft material It doesn't stick to the surface Therefore, it does not look bad after being attached
I use it for the part of the Side bag where the String and the exterior come in contact with each other
The downside is that it's difficult to put up
1.It is necessary to cut them into appropriate shapes beforehand
2.There's no trick to get the air out, so a spatula and water diluted with mild detergent won't trap air bubbles You need to put it up like that
If you are a first time user, I think it's good to be practiced with Small Size for failure
View detail
Fits: HONDA CBR650R, HONDA CBR650F
For prevention of skipping stones, etc
If you look at other people's imprints, it's hard to work with the Squeegee on this product, and it's more solid separately I bought Squeegee on amazon because I was told that the Squeegee that I did would help me work better I did
The work requires removing the entire cowl, so it has to be during a long holiday period like the GW or Obon holidays Is it too tight? Also, the Service Manual is a great help in removing the cowl
View detail
Good things but pricey
YZF-R1M I bought it for 2018 MODEL.
Since webike did not have R1M, purchase for ordinary R1.
M and normal R1 did not notice that the shape of Film is different.
Content is Film, Liquid, Squeegee is Quantity : Set, but it is difficult with the attached Squeegee.
I used a Squeegee with a felt.
Using the supplied liquid, if you do not mistake the procedure itself is not difficult.
You can start again if Film somewhat gaps.
However, if you cut Film, there is no spare, so you need to be careful.
View detail
I think that it is a good product.
When stretched and pasted, because there are linear marks in it, split into Small pretenses - Cut and think that it is better to stick it without stretching.
I failed once and I was able to successfully paste it for the second time.
View detail
Very Easy to stick and stretch
This one is just perfect for the tank. I think it's because it's made by 3M. The glue is easy to stick and the material is easily stretched over curved areas and as soon as it dries, it doesn't peel around the edges. I will buy again for sure. View detail