Reviews
Repair Parts for Other Brand Products!
External Exhaust System for YamahaDT230 LANZA Replaced as Repair Parts for RSV.
The Exhaust System sutra was Exactly, but the length was a little short.
I applied liquid gasket agent for the exhaust pipe and installed it.
Regularly check for oil dripping.
View detail
Fits: KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
ZRX 1200 R
Super processing am thrilled will start my project next year then there are more pictures need some parts Super processing am thrilled will start my project next year then there are more pictures still need some parts View detail
Good product Carbon Exhaust Bracket BMW S1000R Naked 2017-2018 View detail
This for KIJIMA's Silencer band!
[How is it used?
I used it to fix the external Silencer on my TZr50R.
KIJIMA's Silencer band70?Size (https://www.webike.net/sd/20522931/) It is used by wrapping it around the inside of the
How was your experience with it?
It was long enough for a 60mm Silencer.
I used it for KIJIMA's Silencer band, so the width is made with a good size feeling.
The width of your silencer band may be a little too wide, so please check the width of your silencer band.
How did it compare to other products?
The heat resistant Elastic band for Silencer is not so Single Body. (Other than that, KITACO has it out.) I used it for the silencer band of KIJIMA, so I added the manufacturer.
Naturally, I'm happy with the result because it's made in just the right width and looks great.
[Points to note]
As stated, the width may be a bit long depending on the Silencer.
KITACO Band (https://www.webike.net/sd/1343195/) is 25mm wide, so it is necessary to consider with that.
【Review】
The size is just right to use with KIJIMA's Silencer band.
The thickness of the Elastic band of KITACO can be selected, so I thought it would be better if the thickness of the KIJIMA one can be selected as well.
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
Great parts.
It is a device that engages the entrance of the Exhaust pipe.
By narrowing the hole of the exhaust pipe a little, the flow speed is increased and the low speed torque is improved.
I use it with SP Tadao PowerBox.
good point
The Torque really rises.
Acceleration is also smoother.
Installation is very easy.
●High quality and durability.
A bad point
None
Recently, GermanyKEDO company's parts which are often seen seem to be real. If the quality of the exhaust can be improved and the performance can be improved at this price, I think it is cheap.
View detail
Buy as a Repair
Repair Silencer's Bolt only.
I bought this as a Repair Silencer for my S1000RR Full Exhaust System.
I had a bad fall on the Circuit, and unfortunately on the Right Side, and the Silencer became useless. The silencer I originally had was a Racing lineSeries silencer with a tapered shape.
This time, I wanted to renew the Silencer and chose this part number. By the way, the shape of this part number is Hexa shape which is unique to AKRAPOVIC. The diameter is 65Φ.
Another reason why I chose the Hexa Silencer was because it seemed to be easy to replace the Wool.
The entrance is narrow and the exit is wide because the former one is Taper shape. However, the core of Silencer can only be used from the entrance, so it was difficult to roll the Wool, so I chose the Hexa type this time.
I think that the volume is also relieved because the capacity of this one is Large threshold. But the shape is different, so I think you need to re-setting.
View detail
The photo shows 6 bottles Actually 1 pc
The product is fine, but I bought it because I thought it was 6 bottles because the picture of 6 bottles was posted in the posted picture. What I received was one bottle. View detail
A product that's too expensive, but if you need it, you have to buy it.
Because there was no spring hook on the Beams Titaniumium exhaust pipe of WR250X, I welded it.
This is the only one I could find for Titanium, so I bought it. There are too many of them. I don't need this much. It would be nice if you could buy them by the piece.
The thing itself is not bad. I was able to weld it together well and use it.
View detail
A little higher temperature resistance is even better.
The exhaust system on my motorcycle has been changed to Other Brand Product, but it is quite hot. After running, it gets hot at a level that cannot be touched.
The rubbers sold at home center will harden and fall apart from the heat, but this product won't do that.
But the heat makes it feel a little stretched or choppy.
So there is no need to say that a higher heat resistance temperature would be better.
View detail
Fits: DUCATI MULTISTRADA 950 S, DUCATI MULTISTRADA 1260 ENDURO, DUCATI MONSTER 1200 R, DUCATI MONSTER 1200, DUCATI MONSTER 1200 S, DUCATI MULTISTRADA V4 S, DUCATI STREETFIGHTER 1098, DUCATI MULTISTRADA V4, DUCATI MULTISTRADA 950, DUCATI MULTISTRADA 1200 ENDURO, DUCATI MONSTER 937, DUCATI MONSTER 937 PLUS, DUCATI MONSTER 1100 EVO, DUCATI MONSTER 696, DUCATI MONSTER 1100, DUCATI MONSTER 796, DUCATI MULTISTRADA V2 S, DUCATI MULTISTRADA V2, DUCATI MULTISTRADA V4 PIKES PEAK, DUCATI DESERTX
Dress-up parts
I replaced it from the OEM one to accommodate the Slip-on Silencer installation. Since it is not particularly necessary to replace it, it is a complete dress-up. However, because it tightens up the image of Zenta just by changing one place, I think that it is not bad Custom. View detail
AKRAPOVICSilencerfor Repair special size
AKRAPOVICSilencerfor Repair special size, so Homsen has a It is a shape that is not often sold
The Riveter is easy to install and easy to hit However, I think the price is too high. 7,000 yen for 1 pc of Silencer It will be Over, but it's a dedicated product and Brand, so I guess it's no use..
View detail
Fits: YAMAHA SR400 19, YAMAHA SR400 19, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500
Light blowing
This time, the OVER SS Megaphone Exhaust System has been installed with no exhaust leaks and is easy to use I was able to install it I feel the rise of the revolution at low and middle speed is faster than ever before until Limiter comes on 。 Driving will be fun without stress! 。 Replacement of the Gasket is recommended at the time of installation 。
View detail
The size isn't great
I couldn't identify the manufacturer of the Silencer Bracket, so The width does not match, so I cut it and forced it to fit I don't think so, but it's a bit of a shame View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
It was changed with the Exhaust System replacement
It was changed with the Exhaust System replacement
The original one that came with it was crushed because it had been used for over 10 years
There is no change after the exchange
It's a mood thing
Well, it's just his personal satisfaction because it's a consumable product
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z900 (KZ900), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000, KAWASAKI Z1 (900SUPER4), KAWASAKI Z900 (KZ900), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z750FX, KAWASAKI Z1000 MkII, KAWASAKI Z1-R/Z1-RII, KAWASAKI Z1000
The costumer is great
I replaced it because it was either current or badly deteriorated
I think the vibration is a little better when I turn it up to high rpm Maybe it's just my imagination, but if it's deteriorating badly, it's a wear and tear product and I'm happy to replace it and feel good about it
View detail
Fits: KAWASAKI ZX-14R
Essential items for making one out
It's big and heavy. (One Side7?) Removing OEMSilencer and attaching Right Side's Slip-on Silencer. I am worried whether the bundled Bracket has a complicated shape and it can truly fix this lid, but it will be attached properly.
I got it in less than about a week from ordering.
However, this lid is just a little expensive. There is nothing like substitute for Home center. Well it can not be helped.
View detail
It does not suit
Why is not it addicted at all! If it is Universal it is a funny story though it is still issuing for SR. Perhaps it was incompatible with Carburetor Vehicles for FI? If so, it should have a description such as for FI! None of that SR is known Unknown ... Is not it Yamaha's SR in the first place? View detail
Fits: HARLEY-DAVIDSON FL Drag pipe 70-84
ShovelFLH's external Tapered Exhaust System was necessary for replacement
I purchased a used Tapered Exhaust System to install it on ShovelFLH.
If it is NORMAL, the Exhaust pipe will hit the Bracket of Step Board..
Normally Normally goes under the Exhaust pipe, but here is the Exhaust pipe
Pass over. However, the hole of the Frame and the thickness of the Bracket do not match,
Adjusted by setting the File by File. Harley's outside parts So,
It is like this. I think that the price is too high for a simple steel bar.
View detail
Good..
It is Just fit to the 30? Wide Silencer band. Since thickness is not so thick, it is easy to handle and degree of adhesion with Silencer is also good. Length is enough, so I think that it can also be used for Silencer which is quite thick. View detail
Fits: YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA YZF-R1M, YAMAHA MT-10, YAMAHA MT-10, KAWASAKI ZX-10R, KAWASAKI ZX-10R, YAMAHA YZF-R1, YAMAHA YZF-R1, YAMAHA YZF-R1, HONDA CBR1000RR, HONDA CBR1000RR, HONDA CBR1000RR
Good for Dress-up
There is also fear of injury in the part where the installation Band protrudes long. I thought about cutting but because it is dangerous extra use.
The Protect part seems to be hard and firmly protected but can not be diverted to others.
It is very good for those who want Impact for Normal muffler.
View detail