Reviews
Windproofing and soundproofing effects are there.
This is a replacement from Puch Screen.
PoochScreen is Large type and will look forward over Screen.
The windproofing and soundproofing effect is very large, but on the other hand, in the rain, raindrops on the screen significantly worsen forward visibility.
This Screen is about 12 cm shorter than the pooch and has good forward visibility.
However, it was not as windproof and soundproof as expected.
It would have been nice if the front edge of Screen was 5 cm higher.
Of course, the effect is much larger than the OEM's initial Screen.
The quality of the Acrylic pooch is almost undistorted and you can see the front over the Screen, but this Screen looks slightly distorted.
In the middle of winter, when there is little rainfall, I think I would revert to pooch.
View detail
YAMAHAPerformance damper
After a short ride, I feel that the ride is similar to the ride immediately after the front fork is over-fallen, with a lighter steering action and a slight reduction in vibration. View detail
GlassesNG
good
The basic construction is solid.
It is smooth to put on and take off, and the head feels held firmly in place.
The chinstrap length is just right and the D Ring is easy to use.
Shield height can be set freely, and raising and lowering is smooth and easy to use.
bad
The ear area is a little tight.
No space for the glasses, making it difficult to wear them smoothly and causing ear pain.
I don't have Sun visor, so it's hard in the evening, especially on long distances.
Vent hole at the mouth was broken (no problem, so I continued to use it).
It is good for those who do not use Glasses and want an inexpensive, solid full face for short distances.
View detail
Fits: YAMAHA NMAX, YAMAHA NMAX155, YAMAHA NMAX155, YAMAHA NMAX155
Recommended for the summer season and intense heat!
[How is it used?
I installed it because Seat gets so hot in the summer sun that it burns.
Was the one you received as per Image?
Mesh fabric, but it is thick and firm.
Was the installation difficult?
Can be easily attached to the One-touch.
How was your experience with it?
It does not get too hot even when exposed to a little hot sun. It also feels much cooler as a breeze passes through it while driving. Also, the footing is a little worse, but the cushioning is higher and more comfortable.
[Included Parts:were they on?
There is nothing but Instruction Manual.
[Was there anything that disappointed you?
None in particular. Items is a must for summer.
▼Yamaha vehicles are offered as OEMOption Parts for each model, but I think the functionality is so good that it could be Standard Equipment.
View detail
I should have used it sooner.
I broke many ribs in a Solo touring accident in July. Learning from my injury, I bought the Breast Pad for touring and it seems to work well for KUSHITANI and DFG. I should have bought it earlier. View detail
![Service Manual [Supplemental Version]](https://img.webike-cdn.net/catalogue/images/111384/service_manual_yamaha_TS.jpg)
Supplement for late model
It is a Supplement to the Second Type Model of XJR400R.
Each adjustment point corresponds to a later period.
The vehicle I purchased was a MODEL with Immobilizer, so I wanted to check the Wiring diagram around the Front and to check the detailed differences.
The information I wanted to know was well described, so I could check it while performing maintenance.
View detail
To maintain your car properly
You will get detailed and correct information.
However, in my case, I bought it in the sense of Collection.
View detail
Helmet shield
I am very happy with the Mirror shield in Blue as it is the same color as the Motorcycle. View detail
Fits: YAMAHA XSR700, YAMAHA MT-09, YAMAHA MT-09, YAMAHA XSR900, YAMAHA NMAX155, YAMAHA XSR900, YAMAHA TRACER GT, YAMAHA XSR700, YAMAHA TRACER900, YAMAHA MT-09, YAMAHA NIKEN GT, YAMAHA NIKEN, YAMAHA NMAX, YAMAHA MT-09, YAMAHA MT-09, YAMAHA GDP150A (NMAX150), YAMAHA MT-07, YAMAHA GDP125 A (NMAX), YAMAHA XMAX
Used for NMAX155
I purchased this for my NMAX155 with USB and Wiring from Attachment power supply.
There were no particular difficulties during the actual installation, and the USB was successfully attached and used.
Just by purchasing this, you can easily install electrical components, so there is no loss in purchasing it considering the time and effort required for modification.
View detail
Realizes its true value when used in combination with clutch wire adjustment.
I have small arms and legs for my size, so I introduced it to improve maneuverability and to prevent lever breakage when I fall down.
If you just put it on as it is, it's just a Retractable Lever (although that's good enough on its own).
This lever is truly effective when used in conjunction with the clutch wire adjustment.
I have small hands, so I feel it is easier to operate the Clutch if the Clutch meet point is as close to the front as possible, in other words, on the Grip side. (Of course, everyone has his or her own preference.)
So, adjust the Clutch Wire and shift the Meet Point to the front. (Incidentally, the Screw on the Lever side was not enough, so the Screw on the Mission side was also adjusted.)
This makes the lever's play more large than necessary, and that's where this lever comes in.
By adjusting the Screw in the Lever, the initial position of the Lever can be set to the front, i.e., slightly pulled back.
By doing so, it is possible to keep the lever in proper play and still have the lever positioned close together.
Thanks to the quick shifter, the clutch lever itself is used infrequently, so we thought this simple lever with the smallest necessary adjustment function would be suitable for the New Model XSR900.
View detail
That's changing!
I ran about 100 km.
As soon as you get on board, you can feel that, ah, things have changed.
It is not so much that vibration is reduced, but rather that the rigidity around the Frame has been increased several notches.
In Winding, the grips on the rear tires have improved and the front and rear suspension seems to have started working well.
On the other hand, the Retro-chic dullness of SR400 disappears, so a consideration is necessary.
As others have said, I think the stiffness up stiffness is Stress for Main for city driving.
I don't know if I can recommend it.
View detail
The anti-fogging effect is great!
When installing, static electricity? Dust is called for, so be careful in the working environment!
Visually, there is a space between the Shield and the Seat, so the transparency is not as good as it was before the Shield was installed, and I feel a slight distortion.
However, I am Large satisfied with the performance of the product. It is really nice and safe to not fog up, and I would definitely recommend wearing them, rather than opening the Shield a bit and feeling cold. I am a Glasses user.
View detail
Fits: YAMAHA bolt, HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, SUZUKI BOULEVARDS50(INTRUDER800,VS800GL), SUZUKI DESPELADO800(MARAUDER800/VZ800), YAMAHA Bolt, YAMAHA DRAGSTAR1100, YAMAHA DRAGSTAR400, YAMAHA DRAGSTAR400 CLASSIC, YAMAHA XV1600 R100 ROADSTER, YAMAHA XV1700R100 ROADSTER, SUZUKI INTRUDER1400, BMW R1200C, HONDA VT400S, HONDA VT750S, HONDA SHADOW Custom, HONDA SHADOW400, HONDA SHADOW750, HONDA STEED400
I use this Type from Y's Gear on every Motorcycle!
This cover is a domestic product, and I have always used this type of cover from Y's Gear, including my previous motorcycles, and this is the third one of different shapes that I have purchased.
This type is not Completely WaterproofSpec. but it is designed to be used in the event of heavy rainfall, where some rainwater will soak into the MotorcycleBody. (3rd photo) I buy knowing that.
one-eyed:Kawasaki Ninja 400 => The size of the cover was a little too large. (Maybe I got the Size wrong) The wind was blowing, the Cover was flapping, and the corners of Henry beguine's synthetic leather SeatBack were rubbed and sore. (5th photo) I think it is better to protect the attachment of soft material with Towel or something and cover it with Cover. I think it is probably due to the flapping caused by the wind.
The second:Imported 750cc => Almost ExactSize for three whole years and still in use, no tears in Cover, with Hole. I think it is an excellent product. During the rainy season, the inside of the MeterGlass fogged up once when I left the Cover on and the motorcycle steamed up, but it was fixed by removing the Cover and drying naturally. I think it is inevitable when storing outdoors.
third (e.g. in a series) (Item purchased this time):Yamaha Bolt => Almost ExactSize and will last as long as the second one. Leather Tool case with 100size, for human head, WaterproofShowerCap (3rd photo) and then this Cover is applied over it.
I think it fulfills its role as a Motorcycle Cover well.
When outdoors, I use the Covers because I think they are more dust-proof and also provide some security measures than storing the motorcycles bare.
Our Motorcycle Placement (Outdoor) The building is not exposed to direct sunlight until late afternoon. It also has a roof that is about the size of an eave, and depending on the direction of the wind, it can also keep out direct rain. Therefore, the Motorcycle Cover may have lasted for a long time.
As noted in the notes, the heat of the Engine and Exhaust System is allowed to cool before applying the Cover.
View detail
An indispensable book
As it is well known, this book is indispensable for maintenance.
This is the second model that I have purchased, but I need to refer to the parts catalog because I can't find detailed parts part numbers and connector shapes only from this book. Also, the price is ….
View detail
Easy to understand.
[How is it used?
Was the one you received as per Image? Better than I expected.
How was your experience with it? Careful explanation.
[Points to note] It is not yet in use.
How did it compare to other products? Good
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
liked it
I have a bad neck and back, so when choosing a helmet, the first thing to consider is how light it is. I prefer helmets that have no unnecessary bumps on the exterior and no sun visor, so recently I was having trouble finding a good choice. I hardly ride it in summer, but I think it has good ventilation performance, and for the price, it is surprisingly good because of good fitting of the shield and less wind cutting noise and drafts. The weight is also light. Standard helmets will come to your neck in 2 to 3 hours, but this one lasts a day...........................heavier than Balance.
When
Overall, I like it very much, but the Anti-Fog Shield is vulnerable to moisture, and if you touch it when there is condensation, the surface will become rough and visibility will be poor. What do you think the durability is like? Will it still come off in about a week? When I tried it just after it came out (4~50 years ago?) I don't even like the way it looks.
View detail
Fits: YAMAHA MT-09 SP, YAMAHA MT-09, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP
Installation is very easy, but curing is required.
I installed it on a YZF-R7 and there are no problems.
The rear seat is small, so it is a little difficult to fix the seat bag.
I appreciate this kind of OEM side bag development.
With Universal's Side bag, you need to fix the belt back and forth.
In the case of this product, it is very easy to insert the Bracket into the Pocket and connect it to the Buckle.
It is also a good Point that is taken into consideration so that the excess Belt can also be rolled.
It would be a good or bad thing that the Bag itself only has an opening at the top.
I don't mind, but if you put a lot of small things in there, you may have a hard time taking them out.
In addition, when installing the device, it is necessary to pay attention to the speed limit and balance.
Curing is essential as it interferes with Cowl with gusto.
It is an exclusive product, but I would appreciate a lower price.
Bracket and Quantity:40,000 yen for a set is quite...
View detail
It is easy to put on and take off, which is very good, but the buckle remains.
The first step is to assemble the buckle, but the orientation is a bit confusing.
It is best to assemble it while imagining the picture and the finished product.
There is also an attached manual with pictures for installation on the car body.
If you have basic knowledge, you can install it without any problem.
What is so great about this product is that the Bracket can be removed.
If removed, it will not be a concern in terms of appearance. (Only a Small box with YAMAHA written on it will be attached.)
Since the bracket insertion part is held in place by the elasticity of the plastic claw, it is likely to be ruined someday.
That being said, we leave the fixing to the resin buckle.
There will be no Drill if you care.
The only other concern I have is that the buckle for the connection remains in place.
I put harness tape on the frame side to protect it.
I think the price could be a little lower.
It's just good that you have it set up as OEMAccessories.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA MT-09 SP, YAMAHA MT-07, YAMAHA MT-09, YAMAHA MT-09 SP, YAMAHA TRACER9 GT
one-key transmission
Used for one-keying of BOXes
It is easy to assemble as long as you know the key structure.
I am glad that Spring, which often loses them, has a spare.
If it were a little cheaper, there would be nothing to say...
View detail
Fits: YAMAHA XSR700, YAMAHA Tricity155, YAMAHA TRICITY155, YAMAHA TRICITY155, YAMAHA TRICITY155, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA TRICITY125, YAMAHA MT-10, YAMAHA MT-10, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09A, YAMAHA MT-09
OEM Product Installation is easy.
[How is it used? Commuting Morning and evening:2-5 degrees on cold days
Was the one you received as per Image?
Yes
Was the installation difficult?
It is not particularly difficult, but it would be helpful if the coupler position of Wiring is written.
How was your experience with it?
It is warm, but my fingertips are cold.
[Included Parts:were they on?
indicates negation, inexperience, unnecessariness or impossibility
[Was there anything that disappointed you?
indicates negation, inexperience, unnecessariness or impossibility
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail