Reviews
rapid conversion (e.g. VCR, tape deck, etc.)
Easy to turn by hand, easy to use to turn the Size difference by conversion, but a little difficult to take off when removing.
It's nice because it's compact and doesn't take up much space for in-vehicle use.
View detail
Resin Holder for easy insertion and removal of Socket
This Material is definitely better than Gold:PlasticHolder is easy to use.
Material:The Piece of Plastic Holder is stuck on two Gold rods, and the Material such as Shibuichi, 3/8, 1/2, etc.:It can be used to replace PlasticHolderPiece.
Gold genus products tend to loosen and ruin rather quickly once you start using them. This Holder is easy to insert and remove, and I definitely recommend it.
View detail
It's still good
I think it is indeed KTC. I have never used SwivelRatchet before.
The head part is small, and the swivel can be adjusted to your liking, making it easy to use.
The Knurl on the Grip is just right for my middle finger, and it is easy to apply force.
The surface finish is also beautiful, and although it is not as good as Nepros, the shine of the Plating is good and satisfies the sense of ownership.
View detail
I broke it...
Speaking of ChainCutter for RK, it is such a robust Chain tool that it can be used for PRO.
...but therefore requires hang to use, and even the slightest wrong operation will destroy the Tool.
Specifically, if the tool is applied at an angle to the chain, it is out, which is a definite difference from DID's Chain Cut & Crimp tool, which can be somewhat deceptive.
This is what I was trying to do, but I failed spectacularly and bent the Pin at an angle.
The pin was slightly bent, but the bent pin did not feel good and was difficult to use.
I thought a light tap on it with the Hammer might fix it, and poof Drill!
As expected for PRO, it seemed to have been hardened so that it would not wear out even after repeated use, and it broke easily due to input from an unexpected direction.
It means that they are hard enough to provide the strongest performance when used correctly.
But don't worry.
PROSpec. so it can be purchased individually from Tool's Repair Parts1pc.
The Pin I received is the exact Pin as it was when it was new, no problems.
If used correctly, it is a very sturdy Pin, so if you can use it correctly, it is a Recommendation.
If you are not confident, you can practice with DID's Chain Cut & Crimp tool. Like this. It would be useful to use it after experiencing the
Well, if you fail like I did, it doesn't matter because you can still buy it in component units.
View detail
A sense of security to tighten with the stipulated Torque.
Used for the first time since purchase for Oil replacement &Clutch cover replacement today.
It is still very secure, unlike hand-look Wrench.
I had a hard time deciding between the Digital type and this one, but I bought this one because it was less expensive.
Pre-set type is a little difficult to understand how to read Memory, etc., but it is easy once you get used to it.
When it came to the regulation Torque, the unique Snap feel was easy to understand and use.
View detail
cleverly designed tools
The design of this KTC tire crowbar set is very ingenious. The "long claw" shape makes it easy to hook the tire wall and insert it between the rims. The disassembly wrench with a valve on the tool does not need to buy a valve tool separately. This tool is very suitable for outdoor riding, small and easy to carry, and can solve big problems at critical times. -------------------------------------------------- -------- The design of this KTC tire pry rod group is very clever. The shape of "long claw" makes people easily hook the tire wall between the wheels. The tool with an air -south wrench does not need to buy the Qi mouth tool alone. This is this. The tool tool is very suitable for use in the wild riding. It is easy to carry, and it can solve big problems at a critical time. Powered by Google Translator View detail
useful tool
A useful torque wrench is a must for self-maintenance of motorcycles. This KTC torque wrench purchased by webike has a torque range of 2-10 Nm and an accuracy of ±3%. It uses a highly visible scale to adjust the torque more comfortably. This type of wrench is specially used to tighten some small screws. When the small screws on the motorcycle are not tightened according to the specified torque, they are easy to slip and be damaged. -------------------------------------------------- -------- It is necessary to repair a good torque wrench for your own motorcycle. This KTC torque wrench purchased by Webike has 2-10 Nm of torque range and accuracy of ± 3%. The type wrench is specially used to tighten some small screws. The small screws on the motorcycle are not easily damaged when the torque is tightly fastened. Powered by Google Translator View detail
handy tool
This KTC stainless steel scraper is needed to remove the sealant remaining on the surface when repairing motorcycle engines. It is a set of two and can be suitable for scraping surfaces of different sizes. The wooden handle is easy to hold and the quality is also very good. Unlike The ones I bought before were sold out soon. The products of webike are really good and worth buying. -------------------------------------------------- -------- To repair the motorcycle engine to remove the sealing rubber remaining on the surface, this KTC stainless steel scraper is needed. It is two sets of scrapes that can be suitable for different sizes. I bought it quickly before , and Webike's product was really good and worth buying. Powered by Google Translator View detail
Necessities
[How is it used?
I compete in Enduro races with my RM250, and since it is a 2-stroke, I often have to change plugs, and I have been using this plug wrench for a long time.
I lost it during a Race the other day and had to buy it again. My Machine does not have good access to Plug, so I have to choose this Wrench.
Was the one you received as per Image?
As per Image. And I used to use it.
How was your experience with it?
The length is still exquisite. It is possible to reach the Plug by passing through the Glasses. The Glasses part is notched so that it can be inserted through the plug's guyliner.
[Points to note]
How did it compare to other products?
I think there was a good one from HondaOEM Parts, but I heard through the wind that it has been discontinued.
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
Reliable Manufacturer Thickness Gauge
[How is it used?
YAMAHA XJR400R (07 year) Purchased for Gap adjustment and future EngineTappet adjustment of Plug to be used for
Was the one you received as per Image?
It was as shown in the Image, but it was smaller than I expected, so I am a little worried about how well I can adjust the Engine Tappet.
How was your experience with it?
It's working fine
Currently I only use it to adjust the Gap on the Plug, but I was able to adjust it without any problems.
[Points to note]
The product is quite thin, so care should be taken not to lose it or break it during use.
How did it compare to other products?
I have not used other products, so I can't speak much about them, but I am grateful to be able to purchase this product at this price.
These small parts tend to be expensive because they are not in high demand but need to be accurate. I am also grateful that KTC, a reliable manufacturer, is providing them.
Other items that would be helpful
Opinions and requests for Manufacturer:To be honest, I think it is a little difficult to use 9 sheets. It would be great if we could increase the number of sheets by at least one more and make more detailed adjustments.
View detail
Glad I was able to purchase it.
I didn't expect to be able to purchase it. Purchased as a spare. View detail
KTC is the best for tools
Unparalleled quality for not much money! Accuracy! And of course JAPAN!
I think the Personal Level will last a lifetime! For installation and removal of Mirror!
I think you should buy good tools, not cheap ones, since you use them so often, RECOMMENDATION!!!
View detail
The smallest and lightest Merit is the Large Merit.
I bought this to play with the carburetor part on the go. To be honest, it is cheaply made and hard to turn.
The small size and light weight make it easy to carry around.
If possible, I would have liked to have a part to attach a Key Holder.
View detail
Very easy to use!
I've been using it to polish up the Rust part and it's still going strong! I've been using it for about 10 years now.
The only sad thing about the Week Point is that the KTC letters are peeling off so fast…
View detail
The best Gold Genus Case, with the best texture, the best durability!
I use GunGun heavily, but it only gets scratches and no dents, it's really strong.
It has a moderate weight. METAL feeling." It has a very comfortable fit in the hand. It's a good looking and recommendation!
View detail
The best Gold Genus Case, with the best texture, the best durability!
I use GunGun heavily, but it only gets scratches and no dents, it's really strong.
It has a moderate weight. METAL feeling." It has a very comfortable fit in the hand. It's a good looking and recommendation!
View detail
"Japan" It's a one-of-a-kind Tools Set!
I think it is a tool set for personal level and can be used not only for motorcycle but also for bicycle maintenance.
Except for heavy maintenance, this one (and a few more) will do the job.
The quality is unquestionable, just like in Japan! I think you will not lose anything by buying it!
View detail
bulky
No need to prepare Glasses and Spanner for every little maintenance. View detail
When double nut is not available.
I bought this to pull out the sprocket bolt on my SR400.
The reason why we went to the trouble of purchasing the hub clutch is because the SR400 hub clutch has a convex shape for CenterRinging the Sprocket.
This is because the distance between the convex part and the stud bolt is so close that a double nut cannot be used.
I was wondering if I would have any luck using the OEM Nut since it is so thin. Unfortunately, the second one bites only one pile and cannot hang Torque properly.
I had no choice but to buy a special tool.
Still, it was a bit odd to remove the screws because they were coated with screw locks and mine were very sticky.
Fortunately, since it was a RoseRose, access was possible from the back, so I was able to finally remove it by searing it with a raspene, drilling a hole in the center, and pulling out the Torque.
The structure of the Stud bolt remover consists of three Pieces that move and hold the Bolt when it is rotated.
The structure was like a Cell starterClutch.
The screw threads are held in place by the three pieces of the bolt, either on the face of the screw threads or by a line perpendicular to the screw threads, so the screw threads are crushed. Basically, the removed stud bolt cannot be reused.
Since it is possible to engage the stud bolt in the reverse rotation direction, it is possible to loosen the Opposite Thread Screw or tighten the Normal Thread Screw, but as mentioned earlier, the screw threads will be crushed, so it will be a very special application when used for tightening.
It can be used for round bars as well, since it does not need to be screwed structurally.
Maybe it would be good for a sticking Knock Pin or something.
I purchased For M8 this time, so I can use it for Big bike's Exhaust System and so on.
If you have For M6, I think you will have no problem with most large stud bolts.
View detail
Adapter with precision!
Adapter of KTC [1/2→3/8] is accurate and just right to pull out and insert. I can use it for years and it is durable. View detail