Reviews
For parts that should not be removed or degraded by Rust, etc.
What do you do with your brake hose clip from brake fluid tank to master? The hose clip is easy to remove and install, but it can be easily removed by Prank or Accident. Since it is not a place to disassemble normally, it is very safe to disassemble and Firmly Crimp. However, the Ear clampPliers are required for this part.
Also Material:The stainless steel construction makes it resistant to rust and keeps it looking good.
View detail
To Accent.
I used it to install the MONKEY Chain Guard. It's a little Accent. View detail
For a little shock absorption
I purchased and installed this product to absorb the vibration of my Master tank.
I don't know if it has any effect, but I think it's better than nothing.
View detail
Gorgeous
It is easy to install. It is quick and easy to customize. I am riding a BlackGold ZrX1200 DAEG and the Gold Bolt seems to be darker in color. View detail
Installed on Front Fender
Clean Anodized, quality is fine.
Even after long-term use, there is no deterioration due to UV rays.
I replaced it with a Front Fender Screw and it's nice and One point.
View detail
FashionParts are completely for looks only.
I bought this as a Washer for my Master tank. It's a highly visible part, so it's highly self-contained. Is anyone going to notice it? It's Level, but it's okay! God is in the details! Titanium, Carbon, Forged and Cut-out are just some of the words that excite me when I hear them. Let's use them in your favorite places. View detail
Installed as Screen bolt for Demon150GR
Replaced the Screen bolt of Demon150GR.
The OEM has an M6×12 SilverBolt on it.
Red alumite is installed to match the Graphic of the car body.
The Rider side of the four Screen locations is
It is mounted with a bare Flange nut and
Because the screw part sticks out considerably.
I'm going to process it and shorten it.
Flange nut is also OEM
Because it was Flange nut of Silver
DRC's M6Flange nut.
We are changing the color to Red.
You need to be careful with the two wires on the Headlight side.
It is also installed with OEM Flange nut.
Don't get sidetracked like I did and remove Cowl.
If you're thinking of replacing it as is...
CowlReverse from the side and hold it with your hand while you remove it.
Flange nut is going to fall off.
This is the future of Screen with Demon150GR.
You need to be careful when you make the exchange.
I'm writing this as a memorandum.
For the look from the Front.
It gave me a personality.
View detail
For Dress-up
I bought this one because I changed the Bolt to Aluminum and I wanted to change the Nut to Aluminum as well.
It is the same as the normal Nylon lock nut except the material is Aluminum.
Use the right size tool to avoid stripping the anodized surface when tightening.
View detail
Light and strong
I bought this product to replace the Brake Caliper and also to change the mounting bolt to Titanium.
No problems at all with quality, strength and accuracy.
The only drawback is that it's a Titaniumium Bolt, so the price is respectable, even though it's market rate.
View detail
Fits: KAWASAKI NINJA 250 R, KAWASAKI NINJA 250 SL, KAWASAKI Z250
I was able to easily satisfy myself with the Bolt replacement.
It is easy to replace and high class Up self-satisfaction.
I was wondering if the OEM Bolt could be painted if you are handy because of the high price.
View detail
Installed on Demon150GR
I installed it on Demon150GR.
Originally, M6×12, which is widely used in Demon150GR, is attached.
Penetrating, because there is no particular interference.
M6×16 with this product.
Silver Bolt color to match the body.
I wanted to change it to Black color, so I exchanged it.
It can be attached to many other parts, but
Demon150GR is
There are some parts where OEMBolt's Clip is easy to come off.
After checking the installation status of the BoltReverse side.
Recommendation to install.
The Headlight side part in the second picture is
Because the Clip interfered with the Gap + the body.
M6×16 for DURABOLT Shoulder Bag
I machined it and shortened it to M6×12 which is the same as OEM.
The domestic motorcycle is not Gap, but Clip is inserted.
It is necessary to take measures such as pushing from the back here.
By using Bolt in Black, I was able to create a somewhat luxurious look.
View detail
Fits: KAWASAKI ZRX400, KAWASAKI ZRX1100, KAWASAKI KLE400, KAWASAKI ZEPHER 750, KAWASAKI ZEPHER 750 RS, KAWASAKI KLE250, KAWASAKI ZEPHER 400, KAWASAKI GPZ900 R, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI BARIUS II, KAWASAKI ZX-9 R -99, KAWASAKI ZZR600, KAWASAKI ZXR, KAWASAKI ZZR400, KAWASAKI ZZR1100
Rusty Bolt is ugly.
It feels good when Bolt in the place where you can see well becomes Beauty.
I'm not worried about Rust, so I guess I'm okay with the price.
View detail
Self-satisfaction ^_^.
The screen bolt was black, so I bought a blue one to match the front fork. To be honest, it doesn't stand out, but it makes a little accent and I think it's a good parenthesis. I look at it by myself and grin.
I'm considering buying other colors for my stories and changing them periodically.
View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
finally, an exchange
I have been looking for this product for a long time and finally found it and was able to replace it. The price is high, but I am satisfied with the finish of the Tank part with this. View detail
Fits: HONDA CBR600 RR, HONDA CB400 SF, HONDA CB400 SB, HONDA CB1300 SF, HONDA CB1300 SB, HONDA XL700 V TRANSALP ABS, HONDA XL700 V TRANSALP, HONDA XL1000 V VARADERO, HONDA VTR250, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA VFR1200 F, HONDA VFR1200 F DCT, HONDA CBR954 RR, HONDA CBR600 RR C-ABS, HONDA CBR600 F4i, HONDA CBR250 R 10-13, HONDA CBR1000 RR, HONDA CBF1000 ABS, HONDA CBF1000
A few years after installation
A few years after installation
The color is Gold.
The fading is great.
You were a bimoldka in the beginning.
It's starting to look like a Brown envelope.
If you like the color and buy it.
We recommend that you buy again regularly.
View detail
Fits: SUZUKI GSX-S1000
grow dull in color (colour)
The heat from the Engine faded it in less than a year. I'll never buy it again. View detail
Quality as expected
Unlike the previous Aluminum Bolt, it is strong enough to be used in various places.
Just be careful not to overtighten or prevent galling because it is aluminum.
View detail
Theft prevention.
It helps to prevent theft of License Plate. Because it cannot be removed by ordinary tools, it is perfect for preventing mischief and theft, and the price is cheap, so it is inexpensive and effective for Security measures of License Plate. View detail
Cool. But …
I bought this Clutch lever and Brake lever because I thought Carbon parts are very cool.
It is Custom only in appearance. Functionality especially.
good point
It is cheaper than OEMLever and has a better design.
Carbon creates an atmosphere of something special.
Of course, it's pimped out.
A bad point
The carbon deteriorates quickly and becomes tattered.
Carbon is a material used to reduce weight, but it has no particular effect here.
I ended up switching back to OEMLever.
And if you polish it up with PIKAL, it's Polished!
This is one of the experiences that I failed to replace just because of the appearance and without thinking about later.
View detail
Fits: HONDA CBR954RR, HONDA CBR929RR, HONDA CBR1000RR, HONDA CBR600RR, HONDA CB400SB, HONDA CB400SF, HONDA CBR900RR, HONDA CBR600F4, HONDA CBR1100XX, HONDA CB1300SF, HONDA VTR1000 SP-2, HONDA VTR1000 SP-1, HONDA CB1300SB, HONDA CB1300ST
Does the color fade easily?
2800 yen for 7 screws is rather expensive, but the quality is not bad.
I'm afraid that the anodized finish might come off if I tighten the screws too hard.
If Carbon Seat etc. is attached to the tank cap, it may not be able to be installed without peeling it off.
(Due to the gap between the hole and Seat)
In addition, there is a feeling that the color is fading, and for the price ・・・・.
I found it quite satisfying when I just put it on. ・・・・
View detail