Reviews
Beware of tightening Torque
The texture is perfect. Please note that this product is limited to 40N while pure STD Nut is 50N. 50N Torque value was applied and there were no cracks or chips. View detail
Fits: SUZUKI HAYABUSA, SUZUKI GRADIUS 400, SUZUKI GSR400, SUZUKI GRADIUS 650, SUZUKI GSX-R 750, SUZUKI GSX-R 600, SUZUKI GSX-R 1000, SUZUKI GSR600, SUZUKI BANDIT 1250
Tank cap bolt
Just replace the NORMAL Bolt with the color of your choice. View detail
Fits: SUZUKI GSX-R 600, SUZUKI GSX-R 750, SUZUKI HAYABUSA, SUZUKI GSX-R 1000, SUZUKI BANDIT 1250, SUZUKI GRADIUS 400, SUZUKI GRADIUS 650, SUZUKI GSR400, SUZUKI GSR600, SUZUKI BANDIT 1250, SUZUKI GRADIUS 400, SUZUKI GRADIUS 650, SUZUKI GSR400, SUZUKI GSR600
Dress-up
The Tank now looks cool. I am very satisfied. View detail
VisorBracket had rust on it.
As per the title, the rust started to spread to the bolt and it became large, so I replaced all 4 bolts.
Aluminum or Aluminum, this is the one to choose anyway.
The outside diameter of the NORMAL button is 12.6, while the aluminum bolt is 11.6, slightly smaller, but since the tightening torque here is 0.4 Nm, there should be no problem.
I am also satisfied with the later appearance.
I think the texture is good, not bad.
Well, color fading will be inevitable over time.
For this price, I think it is acceptable.
View detail
I almost don't see it and can't see it, but I want to stick to it.
The DURA-BOLT Shoulder Bag is an itchy lineup that has always been a great help to us.
As you can see in the picture, the License Plate mounting area on the back of the Fender is exposed to mud and water directly from the road surface, so it is easy to get dirty and''rust easily''!
This rust is quite a problem child, spreading and breeding rust in various places.
For a low-year model, this is quite a nuisance and can be fatal, so aluminum, which is resistant to rust, is the best material to use.
The Lock nut of the DURA-BOLT Shoulder Bag is also used for the nut.
View detail
Fits: SUZUKI GSX1300R HAYABUSA
It looks good!
It will look better.
The Swarovski inside makes it a little more accent than a regular colored bolt.
View detail
On the front cover of LIVE DIO ZX
[How is it used?
LIVE DIO ZX'02
As Front coverBolt
OEMBolt
M6×10
DURABOLT
M6×16
Size+6mm
I wish DURABOLT Shoulder Bag would release a smaller size, like Button boltM6×12.
Was the one you received as per Image?
As expected as I have purchased several times.
But for the first time, I used it for ScooterFront cover as the name of the product suggests.
M6×16But if you use more than three Button bolts, this is actually Quantity:Set is a great value.
Black color is also a nice deep black color.
Was the installation difficult?
The product has no problem because of the body of the car, but since it had been neglected for many years, it was impossible to remove one Screw due to rust.
How was your experience with it?
Aluminum, so expect rust resistance.
Another reason why we chose the Hexagonal Wrench is that we expect it to improve maintainability.
The OEM Plus screw was tricky.
View detail
? I was so scared.
I degreased the sticking surface cleanly and stuck it on, but it peeled off beautifully.
The rest will peel off no matter how many times it is pasted.
I'm sorry
View detail
Fits: HONDA GROM125G, HONDA CBR650R, HONDA CBR650F, HONDA CRF250RLAC, HONDA CRF1100, HONDA CRF1000, HONDA CB1000R, HONDA CB1300S, HONDA CBR250RR, HONDA CB400SF
Tank cap bolt
Simply replace it with this Bolt and it becomes a One point Accent.
It's a product that has nothing to do with running….
View detail
They don't sell them around there.
Stainless Steel and Black! Cap Nut is common, but I could only find one with a Flange at Webig.
The quality is good! It's expensive because it's Stainless Steel, but that makes sense because it won't rust or fade!
View detail
Fits: SUZUKI GSX1300R HAYABUSA
Tank Shop
Crystal in Bolt is in the way and hard to tighten. View detail
protection
Used to prevent scratches and loosening when fixing Cowl, Screen, etc. Low price, Quantity:1 Set of 4pcs. so it can be used quite a bit.
Consumables, cosmetically good product even with regular replacement.
View detail
Soft carbon Tank Pad
It was warped when I received it, and I tried to dry-apply heat to it, but it peeled off in a day. I think the person who ships the product has to check the Large thing because it is something you cannot see in your hand. However, this is only a problem with this product and I am satisfied with the other products. View detail
It's always in plain sight.
Good price, good quality, and good cost performance
Good variety of colors.
View detail
Fits: KAWASAKI ZX-12R
Weight saving
The bolt had corroded over time, so I decided to replace it. The bolt is very lightweight, but because it is an aluminum bolt, the Torque specified for M6 is 5N, which is half that of an OEMB bolt. The Bolt is very lightweight, but the M6 specified Torque is 5N, which is half that of the OEMBOLT. It is recommended to apply the included Copper Grease. I think Torque wrench is necessary. I replaced it with a diagonal one to avoid distortion. However, the weight reduction is about half of OEM, I think. I haven't measured it, but it works as far as weight reduction is concerned. The number of pieces was perfect and the length was the same as OEM etc. View detail
PetitCustom
It's not extremely conspicuous, but it's a nice, simple change of pace. The only thing is that it is rather expensive. View detail
AGUSTA
I use Blue and Red differently, so that helps. View detail
AGUSTA
Match the color of Adjuster. View detail
AGUSTA
I like the variety of colors. I'm a little worried about the strength, but I'll give it a run. View detail
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!! To it being convenient, M10x40 (pitch 1.25) is two!! We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.
View detail