Reviews
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z750 07-08, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI Ninja 400, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR
The texture of carbon does not accumulate. If the place of a bolt hole also does a slightly narrow kana~bolt, it will be safer for a bolt to be at last previously. (Then although it is better for appearance to be united like this cover although ev
The texture of carbon does not accumulate.
If the place of a bolt hole also does a slightly narrow kana~bolt, it will be safer for a bolt to be at last previously.
(Then although it is better for appearance to be united like this cover although even * also has a decrease and the thing in which the cover of Tokoro of a bolt is divided but ~) It is a place which is always visible, and it watches for a while and considers it as NIYARI.
View detail
The normal bolt of the inner fender of RIA of YZF-R 6'08 was changed into the aluminum bolt. The color also became gold from silver, and though it was cheap, admiration rose custom. Although it is effective also to some weight saving and anxious a
The normal bolt of the inner fender of RIA of YZF-R 6'08 was changed into the aluminum bolt.
The color also became gold from silver, and though it was cheap, admiration rose custom.
Although it is effective also to some weight saving and anxious about whether you maintain after !? (smile), without fading how much, the first feeling of gold also excels POJIPORINI! On a full cowl motorcycle, I think that it is recommended customization.
View detail
It attached to black Ninja250R. Since the meter panel mirror blinker was made into the carbon tone, it was scrupulous. appearance -- very much -- good -- !. If it hits to a tank and a certain amount of die with slight warmth however is not attache
It attached to black Ninja250R.
Since the meter panel mirror blinker was made into the carbon tone, it was scrupulous.
appearance -- very much -- good -- !. If it hits to a tank and a certain amount of die with slight warmth however is not attached with a dryer before sticking, an end will float after adhesion.
Even after I stuck, I warmed by the dryer and made it stick, after I purchase the 2nd sheet and attach a die, since it failed.
View detail
It purchased for the mirror of the type stopped with a cap bolt. The screw currently used by the big bike should have many pitches 1.25 of M10. Although it will change to 2 or about 000 yen by the bolt and a tool, considering a mischievous deterre
It purchased for the mirror of the type stopped with a cap bolt.
The screw currently used by the big bike should have many pitches 1.25 of M10.
Although it will change to 2 or about 000 yen by the bolt and a tool, considering a mischievous deterrent effect, in the direction equipped with a mirror with a higher price, I think that it is cheap.
View detail
I was allowed to use F disk of a cygnus for the brembo and the object for support at the time of major-diameter-izing. Once, it is the use which considers a mischievous stop. Although it will separate simply if there is even a tool for exclusive u
I was allowed to use F disk of a cygnus for the brembo and the object for support at the time of major-diameter-izing.
Once, it is the use which considers a mischievous stop.
Although it will separate simply if there is even a tool for exclusive use ...
It is M10x25mm P1.25 in the M10x25mm P1.5 front-fork side at the brembo caliper side.
The bolting torque of ps. front caliper thinks whether the form of a machining part is a limit mostly that M10 size should stop tampering for 4.9 kg (normal numerical value).
Otherwise compared with the size of M8, it worries M10 that it is about 3 times the price of this.
I think whether the style is restored to Good!!!.
View detail
It stuck, after uniting the location on the tape, in order to drop fats-and-oils & dirt to the thinned detergent for kitchen and to stick straight, before sticking. It is hard to be conspicuous on a black tank too in case of carbon.
It stuck, after uniting the location on the tape, in order to drop fats-and-oils & dirt to the thinned detergent for kitchen and to stick straight, before sticking.
It is hard to be conspicuous on a black tank too in case of carbon.
View detail
if such a bolt is used -- -- the Lord -- don't do!!! -- it may be considered so!!! the torx bolt of a plate screw -- type with a pin. Since a plate screw is a bolt head of a reverse cone, there may be little frequency in use. . . However
if such a bolt is used -- -- the Lord -- don't do!!! -- it may be considered so!!! the torx bolt of a plate screw -- type with a pin.
Since a plate screw is a bolt head of a reverse cone, there may be little frequency in use.
.
.
However, if a !!! rosette washer etc. are used, the same user-friendliness as a general bolt will become possible.
The bolt which flattened the lug of a bolt head to the limit rather than them even if what kind of bolt and it were super-universal head cap bolts.
It is a plate screw.
The act of using a plate screw will also be able to be said to be the customization which makes aerodynamics an ally if it says strictly.
In fact, the unevenness exposed on the surface of a motorcycle has many bolt heads, if those unevenness is smoothed to a limit, will also become construction of aerodynamics naturally and will also become improvement in the aerodynamics engine performance.
The plate screw which can be regarded also as the most heterogeneous in a plentiful bolt.
There are few the advantages and benefits of a plate screw.
in fact, thinking so mistakes, it comes out, and occurs, and the original role of a plate screw is the embodiment of the surface of concavo-convex zero.
It is uneven very small and flattens the surface smoothly as much as possible.
Smooth technology.
If a plate screw is gained, we will be reminded of this language always.
Construction of aerodynamics.
This is splendid customization and I think that it is the customization which cannot disregard existence of a bolt.
Pursuit of the thorough aerodynamics engine performance may be completed using a plate screw.
View detail
He thought that he would stick on the tank of YZF-R6, and it purchased. However, as for a little curved surface, an angle floats and air also enters easily. If there is a crevice, a clear thing will serve as an enmity, and I think that it will loo
He thought that he would stick on the tank of YZF-R6, and it purchased.
However, as for a little curved surface, an angle floats and air also enters easily.
If there is a crevice, a clear thing will serve as an enmity, and I think that it will look dirtily that garbage etc. tend to adsorb.
I consider that it is better not to use except a flat face.
View detail
Completeness, such as a custom paint, increases. Since it is aluminum if it does not take care about torque, a head is weak. It is smooth, if it fastens after preparing the mountain by the side of a hole by a tap etc., when caught.
Completeness, such as a custom paint, increases.
Since it is aluminum if it does not take care about torque, a head is weak.
It is smooth, if it fastens after preparing the mountain by the side of a hole by a tap etc., when caught.
View detail
It purchased in order to prevent a crack sticking with a belt etc. to a tank. When he stuck, it fully degreased by the parts cleaner, the motorcycle was made vertical by the center stand, and it united in the center of a tank with BISHITSU. Clearl
It purchased in order to prevent a crack sticking with a belt etc. to a tank.
When he stuck, it fully degreased by the parts cleaner, the motorcycle was made vertical by the center stand, and it united in the center of a tank with BISHITSU.
Clearly, appearance became good and is [ / before sticking a tank pad ] very much satisfied.
View detail
The thing of the DEYURA bolt which POJIPORINI of form is thinner and is liking which is exchange from POJIPORINI which was being used until now is made into BOTETSU a little. Please keep in mind that it differs from touch of an article image.
The thing of the DEYURA bolt which POJIPORINI of form is thinner and is liking which is exchange from POJIPORINI which was being used until now is made into BOTETSU a little.
Please keep in mind that it differs from touch of an article image.
View detail
It attached to the honda hornet 250 this time. Although 24 mm in inside diameter was conformity in the maker site, it is quite tight in 24 mm. The direction of or more 21 less than 24 size thinks that it comes exactly. It is very that of a har
It attached to the honda hornet 250 this time.
Although 24 mm in inside diameter was conformity in the maker site, it is quite tight in 24 mm.
The direction of or more 21 less than 24 size thinks that it comes exactly.
It is very that of a hard at the time of 24-mm attachment, and it is dramatically difficult for it to insert, if it does not come out after applying grease to a radiator hose inner surface lightly.
In respect of a cooling capability, it can hardly expect.
although it is that there was a difference of 2 times also by a manufacturer's performance test picture -- very much -- -- the original engine performance can be demonstrated! -- it is not a level to say (^_^;) please do not carry out expectation too much ...
I rather think that they are components with a strong accessories element.
View detail
Since the price was handy, it bought it. It is solid and appearance is also beautiful. The sticker was got and stuck given the opportunity of check by the dealer. It is very much good touch. Although it is seldom a conspicuous portion, I t
Since the price was handy, it bought it.
It is solid and appearance is also beautiful.
The sticker was got and stuck given the opportunity of check by the dealer.
It is very much good touch.
Although it is seldom a conspicuous portion, I think that you may become a little accent if it sticks.
Since the upper and lower sides can also change a location so that a sticker can be stuck, many things are stuck.
If a difficulty is said, since it is somewhat large (the portion of the appearing carbon is very well visible to the whole when a number is given), I will think kana with it being overall the place where tastes differ.
View detail
Since there was nothing even if searched, the Black use of a stainless bag-making nut will be put on the market by the DEYURA bolt, and it did not waver but it purchased it. Since it is colored by medicine, even if it drops, a color cannot be easily t
Since there was nothing even if searched, the Black use of a stainless bag-making nut will be put on the market by the DEYURA bolt, and it did not waver but it purchased it.
Since it is colored by medicine, even if it drops, a color cannot be easily taken like paint application.
I am glad, if it is made a little cheaper or is made to enter four piece.
View detail
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow. Yellow looks beautiful in a black cowl and it is very conspicuous. Since a high grade feeling comes out, it i
Since only the yellow of the wing mark had floated in the motorcycle of black monochrome, the bolt of the cowl was also made into yellow.
Yellow looks beautiful in a black cowl and it is very conspicuous.
Since a high grade feeling comes out, it is recommended.
View detail
Since he would like to prevent attaching a crack to a tank, it attached. Although only stuck, the nerve was used so that it might not shift. Although it is not a separate handle, either, having attached also has a place focused on appearance.
Since he would like to prevent attaching a crack to a tank, it attached.
Although only stuck, the nerve was used so that it might not shift.
Although it is not a separate handle, either, having attached also has a place focused on appearance.
It was charmed by the design of the carbon tone! A tank cap seal is also made into a carbon tone, and is taking out a feeling of unification.
Since these parts have got damaged, it will be with an effect.
A tank is now when there is nothing. --
View detail
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!! To it being convenient, M10x40 (pitch 1.25) is two!! We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it
The titanium alloy and taper cap bolt made from a DEYURA bolt I got the friend to yield!!
To it being convenient, M10x40 (pitch 1.25) is two!!
We and these two bolts were treated to the fastening bolt for the brakes calipers of W650!! Probably, it is standard tactics to treat a flange hexagon head bolt, when replacing the bolt for brakes calipers.
.
.
(it is because the outside [ bolt / of an inner hexagon head ] hexagon head bolt is stronger, a tool is not chosen but conclusion by high torque is easy.) -- however, the titanium-alloy bolt transferred by the friend is a taper cap bolt lately.
I understand that this inner hexagon head bolt is a bolt for the upper persons who choose a tool.
Moreover, if it is not technical capabilities of an upper level in bolt manufacture, it will also be the form which is easy to cause a fracture.
.
.
The titanium alloy and taper cap bolt made from the DEYURA bolt here,
It is TSU with very best looks which is carrying out the very fascinating surface!! Since cutting processing is also polite,
I think that it is a Hideyasu bolt!! (by cutting of the hexagon socket which has not caught the center of the bolt head which tends to be in a crude taper cap bolt)
I think that there is no fracture in use of the bolt to the product made from a DEYURA bolt. However, inner hexagon head bolts, such as a cap bolt and a taper cap bolt, are also bolts which choose a tool.
if a wrench with accuracy or low reinforcement (HRC hardness) is used -- NAME -- I am easy -- it is also a bolt!! In Webike, when purchasing the cap bolt and taper cap bolt made from a titanium alloy, I also recommend the purchase of a high-quality wrench.
I think that the wrench of Mytho Roy, TONE, or PB is suitable!! Looks are TSU which brings about an impression cool as it is in a picture and which is a taper cap bolt!!
It may also be the characteristics of a cap bolt or a taper cap bolt that many benefits obtained from the performance which the bolt has will become fabrication easily simultaneously if the technical capabilities of choosing a tool and a manufacturer are not an upper level.
.
.
a delicate taper cap bolt -- general -- the maximum -- it is one of the lightweight bolts.
I think that a feeling of possession and a degree of satisfaction are high products if careful of handling.
Postscript: When using it for the fastening bolt for brakes calipers of W650, the titanium washer made from POJIPORINI (M10) is needed.
View detail
Fits: KAWASAKI GPZ900R Ninja
By acting as an adult of the pure cap too much somehow, since it was unsatisfactory touch, gold was used drastically. Attachment was very easy. Since it is parts rapidly attached to Sakka, it is the touch which may be well understood were dressed
By acting as an adult of the pure cap too much somehow, since it was unsatisfactory touch, gold was used drastically.
Attachment was very easy.
Since it is parts rapidly attached to Sakka, it is the touch which may be well understood were dressed up.
View detail
Blue was chosen! Appearance also looks nice more lightly pure!! Since it was a little expensive, I was allowed to consider it as this evaluation!!
Blue was chosen! Appearance also looks nice more lightly pure!! Since it was a little expensive, I was allowed to consider it as this evaluation!! View detail
It attached to the trial vehicle and the trail vehicle. It is satisfied with firm structure.
It attached to the trial vehicle and the trail vehicle.
It is satisfied with firm structure.
View detail