Reviews
Coloring is beautiful
Purchase Red. Red made it a reliable Manufacturer because it faded easily.
Although the price is high, Anodized is hard to discolor compared to ZETA etc..
I used it to fix Shroud of RMX, but because I do not have a short Size, I cut it and used it.
Because it is an expensive item I want you to choose more like Length.
View detail
Rare Purple
I installed it in Chain guard of DJEBEL 250 XC.
I was looking for Purple to match colors with Rim etc, but there are quite a lot of Blue and Red..
Although it was expensive, I purchased it for Purple wanting it.
It is more like Red than Rim, but it is reassuring.
Strength is also hard to fade and performance is commensurate with price.
View detail
Fits: HONDA MONKEY [MONKEY]., HONDA MONKEY [MONKEY].
One point ♪
I bought it to match the color of Chain and Sprocket.
I like it myself ♪
The object itself is lighter than the OEM.
I would like to see how long we will be durable.
View detail
Strength, Finished Alone. Just high
250 yen or more with Bolt 1 pc - - - It is a high-priced item, but if you use cheap ColorBolt, I will recommend this.
Especially the strength does not compare with Chinese made or unnamed Manufacturer. It's not as good as SteelBolt, so you need to be careful with tightening and it is written down to Torque in the manual. If you do not tighten it to Brown it is Large I am using it without worrying it is durable.
There is a difference in density of Anodized depending on LOT. Although it is understandable when it is arranged, it may be better to purchase it collectively for those who are particular about it.
I installed it in WR's ZETASprocket guard. The color is slightly thinner than ZETABlue.
For reference, BoltLength is 40 mm.
View detail
High quality
It is a solid making. I tried it with Purple alumite of DJEBEL, but it seems that the color is slightly thin.
Although it may be likable and disliked because it protrudes quite a lot, Bolt's thickness may be useless if securing strength with Aluminum.
It is better to be less conspicuous in taste and little more in the taste.
It is quality that exceeds the line with cheap Aluminum Bolt.
View detail
I have degrees of freedom
I installed it to change the Image of the Number part. Screw holes are located at the top and bottom two places so that you can set the book holder in the vertical direction. I wanted to build M Emblem under the Holder, set down with a margin below. Result, top - Quantity : Pair (for Left and Right) Space of about 5 mm in the lower part and 25 mm in the lower part was created and it was able to be mounted as Image.
View detail
Fits: HONDA CB1300 SF, HONDA CB1300 SB, HONDA X4
Two Lengths were long!
We installed it in the 2015 year but only two places of Water Pump did not fit as long as 5 mm so we installed it by Cut.
The place where the Radiator solution comes out one place was not able to be installed because the Bolt tip was the one who took Taper.
I think that it is a good thing because it was customized on your own!
View detail
Not possible
Quantity for YZ 250 F and Husq 's SM 450 R : 2pc purchase.
Since Air Screw adjusts frequently according to the temperature, it is troublesome to turn Screw with a special driver each time, so I bought it.
YZ can be adjusted to Smooth because there is no Engine Starter Motor, but Husk has Engine Starter Motor under the carburetor so how do you think it is slightly subtle. I have not installed it yet.
A bad point :
The price is expensive. I think that it does not need such a thing personally though a figure or fine workmans is attached. I think that it would be enough if the mark or the line which Screw can turn by hand and become a standard to some extent is scraped. From other Manufacturer I would like you to issue a MODEL that has reduced more in cost.
Well, since it is a thing of hobby, it is Large thing in terms of added value (Lol)
View detail
For M8 Dry carbon washer
For M8 Dry carbon washer
I used it for Bolt which stops Light Bracket and Light.
It is light, fashionable and does not rust so it is very good!
Since it is Size which is one size larger than ordinary Washer, it increases the fixed area to Large and realizes secure fixing.
View detail
Purchase for Cowl
I bought this item to make all Cowl's Bolt Gold. There is no problem with accuracy as the color of Image.
I think that it is very good to install on Cowl.
it's recommended.
View detail
Fits: KAWASAKI ZZR1400 ABS, KAWASAKI ZZR1400, KAWASAKI ZX9 R, KAWASAKI ZX-6 R, KAWASAKI ZX-10 R, KAWASAKI Z1000, KAWASAKI VERSYS, KAWASAKI ER6 n, KAWASAKI ER6 f, KAWASAKI 1400 GTR, KAWASAKI Z750 07-08, KAWASAKI ZRX1200 DAEG, KAWASAKI ZRX1200, KAWASAKI ZZR1200
Match the color to your favorite car.
It is a casual Custom, I like the color of my favorite car, I like it very much.
Just remove the screw and replace it. However, overtightness is a caution. To the extent that the screw does not collapse.
View detail
Fits: YAMAHA VIRAGO250
Engine Cover Bolt Kit Red
Since there was a point, purchase at Yahoo! Shopping 's Wa Big 2 shop.
For VIRAGO 250 set of 20 pcs. , The attached heat-resistant Grease is just right in feeling too much.
I think that it can be easily exchanged to anyone by changing the length by 1 pc each and exchanging.
Although it is a world of self-satisfaction to the last, it looks very good after replacement.
I think that Grease and Wrench are also attached to it is kindness and kind.
Gold It is never cheap so it was good that Bolt of Oil element cover was also included.
I chose Red this time but it was a product that was satisfactory also in terms of product without color unevenness and color fading.
View detail
It is Exactly
I was thinking of Mirror's Custom from a long time ago but I could not step on the price, but this was cheap and I purchased it.
Car is the procedure to paste IndiaFilm.
It was Just fit more than I thought.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I installed crops made abroad, but the strength was weak and I licked Bolt head
I replaced it with a product of Manufacturer that I can relax.
I replaced the Front fender 's Mounting Bolt.
With this you can ride with confidence.
View detail
Aluminum BilletBolt
【WebikeMonitor】
I bought overseas cheeps, but since Bolt's head has collapsed I exchanged it with a product that I can relax.
Tank installation part, Seat Cowl, Side cowl
View detail
I am satisfied..
I did not sell Cap Nut of Stainless Steel, I finally found it, so I bought it.
With this, we are satisfied without rusting.
It will be saved if it is a bit cheaper.
View detail
I am satisfied..
Stainless Steel 's Black color Bolt nut is not quite sold.
Especially Cap Nut is not sold, I finally found it, so I bought it. It will be saved if it is a bit cheaper.
View detail
Fits: SUZUKI , SUZUKI BANDIT 1200 S, SUZUKI BANDIT 1200 S ABS, SUZUKI GLADIUS 400, SUZUKI GLADIUS 650, SUZUKI GSR250, SUZUKI GSR250 S, SUZUKI GSR400, SUZUKI GSR600, SUZUKI GSR750, SUZUKI GSX-R 1000, SUZUKI GSX-R 600, SUZUKI GSX-R 750, SUZUKI GSX1300 R HAYABUSA, SUZUKI IMPULSE 400, SUZUKI SV1000, SUZUKI SV650, SUZUKI V-STROM 650, SUZUKI V-STROM 650 ABS
PetitDress-up
The vividness of the color development of Anodized and Shiningly of Crystal have matched, and the circle around Fuel cap became fashionable. Sometimes Rider's visibility is easy to enter and it is more satisfying than I expected. View detail
Fits: KAWASAKI ZX-9 R, KAWASAKI BARIUS II, KAWASAKI BARIUS, KAWASAKI GPZ750 R, KAWASAKI GPZ900 R, KAWASAKI KLE250, KAWASAKI KLE400, KAWASAKI ZEPHER 400, KAWASAKI ZEPHER 750 RS, KAWASAKI ZEPHER 750, KAWASAKI ZRX1100, KAWASAKI ZRX400, KAWASAKI ZXR, KAWASAKI ZZR1100, KAWASAKI ZZR400, KAWASAKI ZZR600
Become one point
Since rust was floating in OEMBolt, exchange
Because it is Aluminum, worry about rust for now is gone
It will be one point.
If you choose a color that does not fit, it looks noticeable, so be careful.
View detail
Fits: YAMAHA TZR250 R, YAMAHA XJR1200, YAMAHA TZR50 R, YAMAHA FZ6, YAMAHA FZ8 FAZER, YAMAHA FZ8, YAMAHA FZR1000, YAMAHA FZR600, YAMAHA SR400, YAMAHA SR500, YAMAHA SRX400, YAMAHA SRX600, YAMAHA TZM50 R, YAMAHA FZ6 FAZER, YAMAHA FZ400, YAMAHA FZ1, YAMAHA FZ1 FAZER, YAMAHA FJR1300, YAMAHA DIVERSION, YAMAHA XJR1300
JPMoto Mart (Dura Bolt) NR Front Footpeg Peg
I installed it in the SR 400. Although it can be installed as it is, when footpeg saw the car body from the back, it became the character of Katakana's inverse Ha at a considerable angle. So it was cut by a little Grinder and it became mounting.
But after installation it is pretty cool.
View detail