Reviews
Fitted.
It fits and I am satisfied with the product as per Image.
Installation was easy and it runs without any problems.
View detail
![RDMOTO Center Stand [Center Stand RDMOTO -]](https://img.webike-cdn.net/catalogue/images/41365/CS01KD_pict_1441800837404795_web_TS.jpg)
Essential accessory for the Yamaha TDM 850
The main stand kit arrived in 7 days by EMS, well packaged and boxed. Everything needed for fitting the stand is included in the kit, with clear instructions in English. The stand and fitting brackets are well made and fit together easily. Some ground clearance is lost due to the brackets protruding beneath the exhaust system, but for a road bike it's not a problem. Overall I am very pleased with the stand kit. I would recommend it as an essential accessory for the TDM. View detail
![RDMOTO Fork Preload Adjusters FPA17 [Fork Preload Adjusters FPA17 RDMOTO]](https://img.webike-cdn.net/catalogue/images/41365/RD_FPA_pict_detail1_web_TS.jpg)
It was Exactly to the conditions.
I have a KYB Inverted Front Fork with Up HandleSpec. I could not turn the handlebar with the normal Preload Adjuster because it interfered with the handlebar. With this product, I can turn it. View detail
Engine Guard
This is the first time I have purchased and installed Engine Guard. 。 After some trial and error, I managed to install it. 。 I am very, very satisfied. View detail
Fits: SUZUKI GSX1300R HAYABUSA
22 HAYABUSA It would be nice to have a 1/4Socket for installation.
This is a general type of Penetrating Axle Shaft.
The 13mm lock nut is tightened with Both Sides, but the entrance is narrow and it is difficult to reach the nut with 3/8Socket. 1/4Socket can easily enter the nut and tighten the lock nut.
It is recommended to work with Socket, which is thinner in thickness.
View detail
Large Variety Satisfaction
It was shipped from overseas and was delivered 1.5 months earlier than the scheduled date.
The packaging was well packed with cushioning material and was very careful.
Thank you very much.
It is surprisingly heavy, but since it is steel, I think that's about it.
Motorcycle will be installed after delivery.
I am looking forward to seeing the cosmetic fit.
If I find something better, I would like to buy it again.
View detail
![Rear Shaft Protectors 【Rear Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018910_6166f1c7a138b.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Front Shaft Protectors [Front Axis Protectors]](https://global.webike-cdn.net/uiu/impression/202110/13_1018911_6166f2a07bcbe.jpg)
Cost-effective choice
The first time you buy this brand, the price is more favorable than other brands. The style and performance are good. There are many colors to choose from, which can be matched with different colors. Please note that you need to bring your own hex key and a pair of socket wrenches when installing. Twist both sides at the same time.
The overall packaging of the goods is good, and there is anti-collision material filling protection in the logistics box. -------------------------------------------------- -------- For the first time, buy this brand, the price is more than other brand discounts, style and meticulous colors, can meet different color body with match, please pay attention to the installation before buying, you need to bring your own hexagle and a pair of sleeve panels. 2 is twisted at the same time.
The cargo pack is overall, and there is a collision material filling in the logistics box.
View detail
![Crash protector[Crash protectors]](https://img.webike-cdn.net/catalogue/images/41365/K44-PH01_pict_1492695008233527_web_TS.jpg)
NINJA650 2020 MODEL
I was able to install it on my NINJA650 2020 MODEL. View detail
It was worth the wait.
I considered givi and sw-motech, but this one was the best pin and I bought it.
Originally scheduled to arrive in early December, but arrived a month early and we're happy!
The installation was done by looking at the Instruction Manual that came with it because I couldn't find it on the Net.
The bracket under the Radiator was installed in the wrong direction.
I'd give it four stars for protection, but I'd have to mock it up to find out;
View detail
It's well made.
I bought this because I wanted a solid Engine Guard.
I like it because it doesn't feel uncomfortable like an OEM Product.
Installation was not difficult.
View detail
It is easy to install.。
I installed it in case of a fall from standing. It is a good and inexpensive product. View detail
RearShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail
FrontShaft protector
Bought this for my 2021model PC40. It looks good and I am satisfied.
An ultra-thin 13mm long socket is required for installation.
View detail
You look better, etc.!
If you've ridden a Z900RS, you know what I'm talking about.
I found this product and bought it immediately because I was concerned about the appearance of the Nut being bare.
Nut's hiding upstairs, etc.!
View detail
It's solid
In the product information photo, there was an Axle Shaft, but it was not attached, but I was able to install it without any problem. The texture is not bad and the only problem is the strength. View detail
It's solid
It feels solid when mounted. It seems to protect the Radiator when it is knocked over. View detail
Fits: KAWASAKI NINJA1000
I'm all about the look!
Good work for a low price. (Excuse me) It's a good product. If you have a 10mm socket, you can install it. I think it's better than OEM! View detail
![RearShaft protector[Rear axis protectors]](https://img.webike-cdn.net/catalogue/images/41365/PK2_pict_000_web_TS.jpg)
Watch out for tools.
I like the thing very much, but be careful when replacing it, because the Socket doesn't fit depending on the thickness of the Socket.
I've never beaten it yet, so I'm setting the protection at 3 for now, and I don't know how effective it is. (I'd like to remain unsure for the rest of my life, though …)
I like the Slider because it makes it look cooler.
*For your information.
The tool is a Vessel T-type Socket set.
If the Socket is less than the thickness of this Socket, I thought it would be Large sturdy.
View detail
The color and the shape are elegant.
NORMAL is Material:Because of the plastic knob shape
The security concerns are undeniable.
This product, which uses Hexagonal Wrench, avoids the mischief of bad boys and
Anodized's tones are not vulgar, and it's a good addition to the color scheme.
View detail