Reviews
Great quality as always
This is a very solid, thick, and sturdy bracket for any diy jobs. The paint is deep and thick. Never encounter any rust. Totally recommend. View detail
Great bracket
This is a solid piece of bracket. It is thick and feels very durable. The paint and its surface is very smooth. I bought to install as an extender for my hand guards. Have ridden over 5000 km so far and no problems. It is still solid and never shakes or bends. Highly recommend. View detail
Bracket is also safe KITACO!
I purchased Smartphone Holder for attaching Bracket from Torx screw of Steering damper. You may as well cheap. It is safe KITACO which also bought Beta pin. View detail
It saves the effort of making from materials
If it is expensive or cheap, is it a safe Gold amount or cheap one?
It is not time consuming to manually punch a hole by machining R with uniform thickness of iron plate,
Impossible.
It is prudent to additionally process based on this, even if you ordered at a Custom shop, buy and process such things
It is regular to weld.
Unlike ordinary products for surface treatment, it will rust unless it is painted after welding, so he will be nervous
It is not what I say.
Not bent - It is roughly not rusted - It is a good thing if it is not deep even if there are light scratches.
I was concerned about the search because it was not often selling, even the same thing was displayed with a different price.
View detail
Nice color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
thanks for the great bracket and also the Repeat Customer Appreciation Point.Books were awesome also.have to translate a lot ot it.
thanks for the great bracket and also the Repeat Customer Appreciation Point.Books were awesome also.have to translate a lot ot it. View detail
ll order more often for sure. thanks a lotgreat products. i love this place. just wish more was in stock when ordering. thanks
ll order more often for sure. thanks a lotgreat products. i love this place. just wish more was in stock when ordering. thanks View detail
ll order more often for sure. thanks a lotgreat products. i love this place. just wish more was in stock when ordering. thanks
ll order more often for sure. thanks a lotgreat products. i love this place. just wish more was in stock when ordering. thanks View detail
Inexpensive and convenient BracketGold tool
Fender EliminatorSpec just purchased KDX 200 SR just paid out OEM's Fender. It is,
Fender EliminatorSpec. Because I do not like to purchase for Number angle close to OEM.
【What made you decide the purchase?】
Screw Hole is elliptical, fine adjustment of installation position is easy, inexpensive, color is Black, Mounting Bracket is inconspicuous
【How was it actually used?】
It is the item as expected according to the drawing which was in the product page.
Black with matte black is cool.
【Was it difficult to install? (Hard parts case)】
It was so easy to just cheat on the Bolt and Number attached Bolt that OEM's Fender was installed.
【Please tell me the point of installation and hang (in the case of Hard parts)】
If the gold piece is too short, Number will be hidden in Fender, so we chose the one with moderate length.
[Is there anything I was disappointed about?]
None
【Hope for Manufacturer - Please let me know if you have any improvement points]
Quantity : 1 Set of 2pcs. It is good to go a little more with such as.
【Have you compared items?】
Nothing, if I could not find a good one on webike, I was thinking to color Gold Stuff Corner at Home center.
[Others]
It is Large changeable satisfying that it is mounted more naturally than I thought.
I think that an unfamiliar Fender Eliminator is also an idea.
View detail
Nice Bracket
This time I chose 2 mm thick.
A thick portion, 1. Although it is harder to process than 2 mm, the strength seems to be. Bracket here is a good place to have places with high vibration and strength.
It's hard to bend, but it's not easy to bend, so it's easy to use.
View detail
Iron plate Bracket
It is Bracket which is iron plate in various ways It is rich in Size and it is saved. A thickness of 1. Although it is inferior in strength at 2 mm, it is easy to bend and usability is very good. There is no reason to say that the price is reasonable! View detail
Good strength, Good processability.
DAYTONAMounting Bolt (78759) In combination with Navigation (JupiterYPL520) We used it to fix.
You can bend it with Pliers and you can cut it with 100 gold cutting saw.
If it was about Navigation weight, it did not distort even running on a bad road.
As a caveat, Steel requires cutting surface to be rustproofed.
I think that it is a good product that can be used for various things depending on the idea.
View detail
ETC Sensor relocation
I purchased ETC Sensor to move it from Cowl to Cowl. With reference to the photograph at Homepage, it was set to be close to the original angle. It is recommended because it is light and easy to install. View detail
When attaching the Shroud after 04 to KLX and the D-TRACKER to 03, only the Bolt hole under a Frame does not suit.the place which measured the Size and was said for buying a general-purpose Stay although it did not get used to the mind which he carries ou
When attaching the Shroud after 04 to KLX and the D-TRACKER to 03, only the Bolt hole under a Frame does not suit.the place which measured the Size and was said for buying a general-purpose Stay although it did not get used to the mind which he carries out and buys very much by the Set of a 5 or 6-cm mere Stay and Bolt although the Stay for attaching has also come out from the other company -- Exactly Size with this Stay by no means! buying it immediately -- it was . [ of about 3000 yen ]Please see the
photograph and refer to it.Since a color also has a blue Anodized with red other than the Silver which I bought, it can choose by liking!
View detail
It is difficult to be thick and to bend freely from an Image. Although not much tight R and bending at a tight angle cannot carry out a Recommendation, if die length and a use suit, I will think that a Parenthesis is very good.
It is difficult to be thick and to bend freely from an Image.
Although not much tight R and bending at a tight angle cannot carry out a Recommendation, if die length and a use suit, I will think that a Parenthesis is very good.
View detail
Since most fitting holes of a NORMAL and external muffler body do not suit at 8 mm and the Size of the hole of the Stay of the attachment for my vehicles having exchanged the Step for the Back step of the COERCE, and fixing the Muffler does not su
Since most fitting holes of a NORMAL and
external muffler body do not suit at 8 mm and the Size of the hole of the Stay of the attachment for my vehicles having exchanged the Step for the Back step of the COERCE, and fixing the
Muffler does not suit at 10 mm,
When searched with kana without some good things, the die length, the Size, etc. of this mounting bracket were the
Exactlies.
Although about 5000 km of
runs are using it It seems that it is satisfactory in durability for the moment.
It is black and it is the point which cannot be easily conspicuous.
View detail
Fits: YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X, YAMAHA WR250X
[a Webike Monitor] -- no attachment is problematic -- it is . as [ be / at / it / somewhat heavy ] It is unavoidable well.
[a Webike Monitor] -- no
attachment is problematic -- it is .
as [ be / at
/ it / somewhat heavy ]
It is unavoidable well.
View detail
[Webike Monitor] Dramatically close with the Tail lamp, since the Fender less attached to the Muffler of TwoBrothers was attached to the Number plate. The Space for attaching , therefore the License light extended this time was not able to
[Webike Monitor] Dramatically close with the Tail lamp, since the Fender less attached to the Muffler of TwoBrothers was attached to the
Number plate.
The Space for attaching
, therefore the License light extended this time was not able to be secured.
, however the fixed method of a Number plate are dramatically simple.
since -- it decided to solve this problem in a very simple way.
Then, what is used is this product.
Two common 3-mm Plates are attached at right angles to an original Number fixing position.
It is only this.
Since three holes are open to this product, a Number is fixable by two Positions except a Fender fixing hole.
(A position is changeable by the form and feeling of a Muffler)
Since the Space was secured between Tail lamps, License light can be extended at last again.
Since
Black paint application is carried out, appearance is not worried, either.
If it is
DIY, it restricts to the goods of an Emon too (smile).
View detail
It can clamp easily [ a handlebar, the frame of a motorcycle, etc. ], and also texture is also very high and the product beautifully finished by anodized processing is an excellent piece of conviction. Although we used it for wearing of a helmet holde
It can clamp easily [ a handlebar, the frame of a motorcycle, etc. ], and also texture is also very high and the product beautifully finished by anodized processing is an excellent piece of conviction.
Although we used it for wearing of a helmet holder and PPS, since we did not have a clamp of the inside diameter which suits well, we wind a rubber board on hand around a cut & pipe in the shape of a strip of paper, and are fixed.
I think that it can divert to various parts according to a device since it is possible for the lineup of the product of an inside diameter difference to be carried out in some numbers, and to choose according to a use part.
Although he can fully understand, it is glad to say that it will be a value article very much if structure of a product is seen, if it becomes if it may be allowed to wish so much a little cheaper .....
(Smile)
View detail
It used for chamber stay. Probably, worries also have little rust-proof, since it is aluminum. Although reinforcement is somewhat anxious in case of aluminum, thin stay seems to be comparatively thick and, as it is, there is likely to be reinforce
It used for chamber stay.
Probably, worries also have little rust-proof, since it is aluminum.
Although reinforcement is somewhat anxious in case of aluminum, thin stay seems to be comparatively thick and, as it is, there is likely to be reinforcement.
It reinforced with the stainless stay S624 of the emon separately, vibration proof was expected, and the terminal area was used for the rubber washer.
It was convenient that the stainless stay S624 and screw hole of the emon were in agreement to some extent.
Although run about 1000 km, there is likely to be no place problem of Kon.
View detail