Reviews
The Larger the Size, the better the accuracy!
I buy KTC for large sized sockets. The price is cheap and the accuracy is good, so it helps me a lot. View detail
Strong!
I don't use Joint very often, but it is a product I worry about if I don't have it.
It is a product of strength, precision and no mistake.
View detail
Adapter with precision!
Adapter of KTC [1/2→3/8] is accurate and just right to pull out and insert. I can use it for years and it is durable. View detail
Precision Adapter
Adapter of KTC [3/8→1/2] has been in use for years and is durable.
It's also good for extraction and accuracy.
Highly recommended!
View detail
Socket with tameness-resistant structure
I like Koken's Socket because of its accuracy.
The Surface Socket is particularly safe because the point of contact is closer to the Center, so it is harder to nick.
I highly recommend this Socket!
View detail
For Torque wrench
Purchased hex bar Bit for use with Torque wrench.
If you have a lot of Bit tools, this one is good for more situations you can handle.
View detail
"cool
[How is it used?
For Axle Nut in CUB?
Was the one you received as per Image?
Yes
Plating is so cool!
How was your experience with it?
Good Ordinary Good
Although the price is high, I don't want to compromise on the tools.
I bought a good one and plan to use it for the rest of my life.
Nepros shines in the tool box with its beautiful plating.
It's too good to be true for Sunday mechanic!
Snap onLevel is a quandary, so I'm not sure I'll be able to afford it.
Nepros is not too expensive if you are tall enough to afford it.
This time I bought it
[Points to note]
No dropping or bumping!
Plating is a waste of time lol.
How did it compare to other products?
Pricey, but maybe cheap if you use it for a long time?
Other items that would be helpful
Installation points and hang/Items to buy together/ Opinions and requests to the Manufacturer
View detail
DriveRecorder - A must-have for installation
I used it to install a DriveRecorder in my car.
I have installed several DriveRecorder units in the past, but most of them were powered by Cigar lighter sockets.
I was worried about whether it was just taking 12V, or whether it was bucking the voltage, etc. So I thought, why not just add a Cigar lighter itself and take it from there?
One of the most exciting things about this product is that it comes with three take-out Fuses. (I will use one of them).
The FuseCase is equipped with a normal flat type, a low profile type, and a MINI flat type, so if you want to make a branch wiring from the Fuse box, you can turn it from other types of wiring. (However, since the end of the branch wiring is attached to the Pipe Type Fuse, it is necessary to prepare the Fuse, FuseCase, and wiring for the end of the Fuse, or to cut the Fuse Gold and make it into a Bullet Terminal. (In this case, if the polarity of the fuse is wrong, the wiring will be directly connected without fuse.)
It is not waterproof construction, so care should be taken when using it for Motorcycle.
View detail
Driven Sprocket Replacement
I purchased this to replace a Driven Sprocket, but could not use it because the Nut seemed to lick when a strong load was applied.
I bought another socket (TONE hexagonal) at Home center and replaced it. The price was about the same.
I thought that a hexagonal shape would be more suitable than a dodecagonal shape because of the torque applied, but Webike did not have a deep hexagonal shape, so I had no choice but to purchase one. I used it once and will never use it again.
View detail
For removal of Bolt from Suspension
[How is it used?
YAMAHA XJR400R (07) The Exhaust System Hanger was used to install the Exhaust System Hanger on the Suspension of
The bolt that fixes the suspension of XJR400R is a 10mm hex lobe bit, but a tamper-resistant bolt is used. I used this product to remove it.
Was the one you received as per Image?
It was exactly as shown in the Image. The texture of the product is good and I can use it for a long time.
How was your experience with it?
It is easy to use. It has a luxurious feel.
It is a product that is not usually used, but it is a must-have when performing suspension-related work.
[Points to note]
nothing special
How did it compare to other products?
The same product is available from other manufacturers, but I think SK11's product has the best Cost performance.
View detail
9.I wanted 5mm.
I use an Impact Driver for APRIO Clutch maintenance, but it only has a 12.7mm 24, and I wanted to use a 9.5mm driver because it was troublesome to replace the Adapter and other parts.
If I use 9.5mm to tighten or loosen 24mm, I may break Adapter or Socket wrench by Overtorque, but I would like to use 12.7mm in that case.
I often use SK11 tools because they are cost-effective.
View detail
For Top Bridge removal
[How is it used?
YAMAHA XJR400R (07 year) Purchased this item to remove the Top Bridge to make the Separate handleSpec.
Not only XJR400R, but also Motorcycle's Top Bridge is fixed with 27mm bolt, but it is likely to be tampered to loosen it with Wrench or MONKEY.
Also, since it is a rare Size, Home center often does not sell it. I also looked for it at Home center at first, but they have 12-square but not 6-square Socket.
It seems that it can be used with a 12-square, but I rejected it because it seems to change the way Torque is applied and I am afraid of it.
Was the one you received as per Image?
It was just as Image.
The only use for it is to remove the Top Bridge, but I am glad I bought it because I will be using it for O/H of the Front fork and for returning the car for inspection.
How was your experience with it?
It feels like an ordinary Socket, but compared to the cheap Socket I usually use, I feel that the TONE-made Socket is made differently.
[Points to note]
The slot is Large, so you need to check the size of your Ratchet.
View detail
Hexagon socket is a hazmat
When I was a teenager who started collecting tools, I heard from a Sale Stalker at a tool store that Hazettes do not crack even when used with an impact wrench (I don't know if this is true or not). This time I bought it because the bolt that stops the cowl of DORSODURO? is 4mm hexagonal.
Hazet is textured with a non-slippery surface, so your hands don't slip.
View detail
Considering the price, I am satisfied with Large.
The fact that you can buy so many sockets at this price is enough to make you feel like a big shot in the arm.
The quality is not cheap or poor, and it is usable in its own way.
Since it is not possible to purchase Single Item, we replace frequently used items with more expensive Single Item when they are worn out. (10mm etc.)
View detail
For maintenance.
It was good because it was easy to use for maintenance and servicing and the types of products were well used. View detail
I chose TONE after hesitating between KTC and KOKEN.
Quantity:I ended up using the SK11 Hex socket I bought Set for many years.
Bit of Size (4mm, 5mm, 6mm) that is often used (4mm, 5mm, 6mm) to dispel the fear of licking as the corners round off.
I decided to purchase Single Item and replace it.
I thought KTC and Koken would be good, but they are rare for Hex sockets.
I was attracted to TONE because of the Silver color.
As expected from a domestic manufacturer, the product is of high quality.
This allows for safe maintenance.
View detail
Quintessential quality.
Quantity:I ended up using the SK11 Hex socket I bought Set for many years.
I decided to purchase a Single Item to replace a well used Size Bit that has recently had its corners rounded off.
I was torn between KTC and KOKEN, but decided to go with TONE because of the Silver color.
As expected from a domestic manufacturer, the product is of high quality.
This allows for safe maintenance.
View detail
I purchased this for Tank removal.
The Tank of CB1300 is fixed with Frame and Wire, and this Wire is fixed with Torx screw, so I bought it to remove this Wire.
I don't think I will use it very often, but it would be nice to have.
It also comes with a Holder, which is convenient for putting it away.
The product is from a well-known manufacturer and can be used with confidence.
In general, the product is satisfactory.
View detail
Used for Meter certification of CB50JX
The Tachometer lighting on my CB50JX was T6 BA7S, so I bought it to replace the entire socket to convert it to LED.
The Universal T10Wedge Bulb could be used, and the fit was just right, not too tight and not too loose.
Although there are inexpensive Manufacturer unspecified products available in the market, we prioritized reliability.
If possible, a longer pole wire would improve handling and workability.
View detail
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phi
signet: -- SIGNET:1/4DR 1/4x3/8 socket-adapter product number: -- 11510 description of item [ ] -- [ -- size: -- overall-length: -- the outside diameter ] -- [ -- concave -- the socket of 3/8DR, etc. by the ratchet handle of 1/4DRx convex 3/8DR:26mm:11phimm] 1/4DR, etc.
When using it .
View detail