Reviews
Although it is those who are liking and using Cau Ken's socket, about this hex socket, a using feeling is not so good. I think that the right and wrong of a tool also changing liking of people a lot will be that it is better a thing [ choose / the thi
Although it is those who are liking and using Cau Ken's socket, about this hex socket, a using feeling is not so good.
I think that the right and wrong of a tool also changing liking of people a lot will be that it is better a thing [ choose / the thing of KTC ] if a hex socket is purchased enough as the opinion of me and an individual although he plans to understand.
View detail
Although it is very big-ticket goods, when how to lick the head of a bolt nut and do what has also been lost, this product carries out the highest work. It holds, so that the slot minced aslant eats away and is surprised at a firmly and the licked hea
Although it is very big-ticket goods, when how to lick the head of a bolt nut and do what has also been lost, this product carries out the highest work.
It holds, so that the slot minced aslant eats away and is surprised at a firmly and the licked head.
I am dramatically secure, if it enters in the inner part of the tool box usually although it is not a tool to be used.
Those who do general maintenance by themselves.
I think that he buys it especially about the person treating older vehicles, and there is no loss.
View detail
14MM is the largest sizes at one fourth. it is user-friendly and is saved -- 笙ェ -- reliable Brando -- budget prices!! it is perfect -- it is -- ~.
14MM is the largest sizes at one fourth.
it is user-friendly and is saved -- 笙ェ -- reliable Brando -- budget prices!! it is perfect -- it is -- ~.
View detail
BOX of a signet It is the 2nd piece now. Since accuracy also has neither what problem nor worries to me and also used surface finishing, the thing of the signet was chosen. The charm of No. 1 is that a price is cheap above all. He bought it, i
BOX of a signet It is the 2nd piece now.
Since accuracy also has neither what problem nor worries to me and also used surface finishing, the thing of the signet was chosen.
The charm of No. 1 is that a price is cheap above all.
He bought it, in order to use only the drain bolt of a carburetor this time.
Although there were 17 mm of drain bolts of a carburetor, since the head was thin, the taper portion of the opening of BOX was deleted until it grew into the flat.
The last BOX is also processed into drain bolts with a sensor.
I think a product handy although only for one kind of bolt is processed.
View detail
You made it eaten and attached to a screw, and it made it reverse. It seems that required sufficient accuracy is secured although the quality in a fine portion is inferior in comparison with Nepros. Since bits were consumable goods, it was expecte
You made it eaten and attached to a screw, and it made it reverse.
It seems that required sufficient accuracy is secured although the quality in a fine portion is inferior in comparison with Nepros.
Since bits were consumable goods, it was expected from robustness and chose HAZET.
View detail
Since it is required at the time of desorption of the muffler (yoshimura) of an address, it purchases. Since the axis is also firmly pressed fit by plating although it is cheap, it is likely to be equal also to the use more than DIY more than enough.
Since it is required at the time of desorption of the muffler (yoshimura) of an address, it purchases.
Since the axis is also firmly pressed fit by plating although it is cheap, it is likely to be equal also to the use more than DIY more than enough.
View detail
Probably, there is, if it makes a mistake in a 6 angle type purchase absolutely, since a fear of licking from a spanner will be canceled if the user-friendliness ordered since there was no 10-mm socket at hand has this too. [ no ] I will find it usefu
Probably, there is, if it makes a mistake in a 6 angle type purchase absolutely, since a fear of licking from a spanner will be canceled if the user-friendliness ordered since there was no 10-mm socket at hand has this too. [ no ]
I will find it useful from now on.
View detail
The bolting torque of a wheel nut is 12 or more kg-m. powerless me -- at last -- 60 cm -- 1 / 2 spinner-handle purchase was carried out. The 22-mm socket which it had is 3/8. This is purchased under the pressure of necessity. It has the ad
The bolting torque of a wheel nut is 12 or more kg-m.
powerless me -- at last -- 60 cm -- 1 / 2 spinner-handle purchase was carried out.
The 22-mm socket which it had is 3/8.
This is purchased under the pressure of necessity.
It has the adapters of 1/4, 3/8, and 1/2 for each size, and there is no loss.
Signet products are regularly used by that which is cheap and also says quality! Although it is a simple tool auxiliary article, a socket is also connected firmly.
View detail
The reinforcement of the signet products with beautiful plating is also enough. In spite of being fully in the region of professional use, it is glad that they are budget prices. A place [ especially the screw thread of a plus is that of a slight
The reinforcement of the signet products with beautiful plating is also enough.
In spite of being fully in the region of professional use, it is glad that they are budget prices.
A place [ especially the screw thread of a plus is that of a slight lack or a cone and a tool wants to use a good thing as much as possible ].
But a good driver is a heavy price very well.
Since a price is held down at a low price and it is not bulky to it although a plus bit socket is high quality, portability is also good.
And if a head worsens, it is exchangeable quickly.
You should choose a socket, if it uses wisely for a long time!
View detail
This is considered well. Although the head of the large bolt was put into the hexagon-head side of a front axle until now, if it is this, it can be used like a BOX wrench. Although construction material also became brave, and it is synthetically s
This is considered well.
Although the head of the large bolt was put into the hexagon-head side of a front axle until now, if it is this, it can be used like a BOX wrench.
Although construction material also became brave, and it is synthetically satisfactory although I think that a price has individual difference.
Since the hex wrench of the size is a splendid price, they are four roles in one.
It is recommended at those who carry out by themselves to the work which pulls out axle shafts, such as a tire change.
View detail
Although there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle, Although a sensor hits with a standard socket, and it does not enter, it cannot access from an eng
Although there is no scene which needs a deep socket not much and most was able to work with extended Bar and glasses to the usual socket by motorcycle,
Although a sensor hits with a standard socket, and it does not enter, it cannot access from an engine guard's opening with glasses but the oil is changed since the drain bolt with a sensor was attached,
One by one, the engine guard had to be demounted, and since it was troublesome, it decided to buy a deep socket.
However, since it was a tool of only a drain bolt, since the deep socket of the signet was cheap, it bought it with the cheapest possible thing.
It is cheaper than the standard socket of KTC.
Although the price is cheap, the surface is mirror finish, and its appearance is also beautiful and it thinks that the processing accuracy of the plug by the side of a bolt and a joint is also satisfactory.
As for the receptacle of a bolt, naturally, power is applied to the neighborhood [ not the tip of the angle of a bolt but ] side in the sixth page.
Although the hole which misses a sensor cord in my case has been made in a side face, since reinforcement is satisfactory, by anticipated use, I still think that there is no problem.
However, frequency in use uses only a years time only by oil change.
Since I think that cost performance is high, especially in a direction without a prejudice, I think that this price is recommended to a tool.
View detail
Since the bit socket of HAZETTO often looked at the talk that it was good, it carried out plurality size purchase. It is used for Aalen bolts, such as a motorcycle and a bicycle. The feeling of a fit to the hole of a bit portion has the peculiar f
Since the bit socket of HAZETTO often looked at the talk that it was good, it carried out plurality size purchase.
It is used for Aalen bolts, such as a motorcycle and a bicycle.
The feeling of a fit to the hole of a bit portion has the peculiar feeling currently turned to the direct, if preeminence and torque are added.
Although it was also in other Ho's impression, it is hard to explain this feeling by means of language.
Merit looks nice much more in case of a high precision bolt like a titanium bolt, work is very smooth, and it is feeling II.
I think the good-quality item corresponding to a price.
View detail
The head of the bolt was licked in the bit of TONE, and since the huge labor was taken to remove the bolt, it resulted in purchase. Purchase is 8 mm used well, 6 mm, and 5 mm. Although the bit purchased with the new bit of TONE by the same work th
The head of the bolt was licked in the bit of TONE, and since the huge labor was taken to remove the bolt, it resulted in purchase.
Purchase is 8 mm used well, 6 mm, and 5 mm.
Although the bit purchased with the new bit of TONE by the same work that licked the bolt compared, is the hardness of a bit touch that it loosens with JIWATTSU in the bit of HAZET to loosening with PAKITSU highly, in TONE?
It is difficult to express with words.
It is a tool which considers giving up if it does not loosen in this bit, and removing by other methods.
View detail
Although a bundle/slight looseness is troublesome hexagon head bolts, working hours can be considerably shortened in the combination of a T type handle + hex bit socket. Although cost effectiveness is also natural, it is a tool which make a hand easy
Although a bundle/slight looseness is troublesome hexagon head bolts, working hours can be considerably shortened in the combination of a T type handle + hex bit socket.
Although cost effectiveness is also natural, it is a tool which make a hand easy to dabble in maintenance.
In the direction which was disgusted with the stick wrench, he buys it and there is no loss.
View detail
Although the tool of STAHLWILLE made from a germany is purchased well, To a quality HPQ (High PerformanceQuality) series grip or the limit which becomes empty. Unlike the mirror tool of fashion, have used satin finish of chrome plating processing
Although the tool of STAHLWILLE made from a germany is purchased well,
To a quality HPQ (High PerformanceQuality) series grip or the limit which becomes empty.
Unlike the mirror tool of fashion, have used satin finish of chrome plating processing recently [ AS-drive (field contact) type ] which it has made to closing in, and the inner one also serves as polite structure, and does not hurt its bolt, but this,
since it does not slide although held by the hand stained with oil, it is a very easy-to-use tool -- it is good although it is somewhat expensive.
View detail
It purchased in order to exchange rear axle shafts. since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was . Even if it also compares appearance with the socket of KTC, a result seldom has a diff
It purchased in order to exchange rear axle shafts.
since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was .
Even if it also compares appearance with the socket of KTC, a result seldom has a difference, and a price is completely different above all.
The tool here is different although it is said that a cheap article tool is not good.
Since it is quite cheap even if it arranges by a set, I think that it is profitable, and I think that it is also good to arrange the size which it does not have individually.
It is recommended anyhow.
View detail
Although the extension bar had some kinds of things of 100 mm or more, he wanted to only extend only a few this time, and since it was hot, he bought a 50-mm thing also using too long a thing. Although the thing of 50-mm extension in 3/8 size seldom h
Although the extension bar had some kinds of things of 100 mm or more, he wanted to only extend only a few this time, and since it was hot, he bought a 50-mm thing also using too long a thing.
Although the thing of 50-mm extension in 3/8 size seldom had a choice, since it used also at work, TONE was chosen.
Although it is a product which no affectation features, since structure is solid, it can be used in comfort.
Incidentally, although a ratchet handle and a socket are the manufacturers who are different, respectively, they have clung firmly satisfactorily.
View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is used for desorption of the foil bolt of a car. Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out. It is
It is used for desorption of the foil bolt of a car.
Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out.
It is found useful when fastening a thing which will be troubled if the crack of the nut made from aluminum, etc. is attached.
Although durability is also used by two tire change (studless summer tire) + exchange [ one / brake fluid ] per year per year and is frequently dropped on the concrete of a garage, it hardly has a crack as the photograph.
Although 3/8DR is used for maintenance of a motorcycle in many cases, I make a torque wrench dock with this (1/2DR), and am using it for a fasten lump of foil.
View detail
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make. Since plating processing of comment and all is carried out, compared
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make.
Since plating processing of comment and all is carried out, compared with the KTC products of a rough form, it is dramatically beautiful at satin finish.
- Since knurling is carried out, it is easy-to-use as a skid at the time of already turning and carrying out.
- I think that it is quite strong structure since it did not fracture even if it applied quite unreasonable torque.
- A price is quite cheaper than KTC products.
Since KTC is also made now in China, since the company of the canada was making this product make from a singapore etc. by OEM, quality had uneasiness, but does it seldom change?
Rather, the quality of plating is a top all the time.
View detail