Reviews
Fits: HONDA BROAD 90, HONDA CABINASTAND-UP90, HONDA BROAD50, HONDA Topic flex, HONDA Topic pro, HONDA TOPIC, HONDA TACT FLUMARK, HONDA TACT STAND-UP, HONDA TACT, HONDA SUPER DIO, HONDA CABINA, HONDA Tact S, HONDA CABINA 90, HONDA DIO CHESTA, HONDA DIO ZX, HONDA DIO ST, HONDA DIO, HONDA DIO SR, HONDA DIO, HONDA DIO SR
Very, very bright light.
The price was reasonable and the Headlight is very bright.
Installation was easy as well, as I just had to replace it.
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
Cospa strongest
It is now so bright that it is dazzling.
Recommendation.
Commendation for commuting to work and school
View detail
It's bright.
This is a replacement from HS1God of thunderG2 。
It is simply 1800lm→3000lm, which is Large odd bright.
Level is a bit of a nuisance to oncoming cars.
If there is not enough room in the mounting location, it may not fit in the Halogen, since it is longer than Halogen and there is also a controller.
View detail
very bright
[How is it used?
Since the Light is dark.
Was the one you received as per Image?
Yes
Was the installation difficult?
Is it difficult to find a position to attach the BOX?
I refer to other installations on Net to 6V MONKEY/GORILLA Main Harness.
Bundled with inHemp palmock.
How was your experience with it?
It is very bright. Safe at night.
Be sure to adjust the optical axis properly.
It is a nuisance to oncoming traffic.
If it is too white, it may be difficult to see on rainy days.
I decided on 4500k and it was the right choice.
I am happy with this for commuting.
[Included Parts:were they on?
Yes
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA DJ-1, HONDA DJ-1R, HONDA DJ-1L, HONDA DJ-1RR, HONDA NSR50, HONDA NSR50, HONDA XR50 MOTARD, HONDA Express, HONDA CAREN S, HONDA GYROUP, HONDA GYROX, HONDA GYRO CANOPY, HONDA JUST, HONDA JULIO, HONDA JOY, HONDA GIORCUB, HONDA Giorno, HONDA GIORNO DX, HONDA SQUASH, HONDA SPACY50
It's still bright.
The headlight is dark and I had been holding back because I had read that Halogen bulbs would melt the lenses. I had to remove the Valve Reflector, but it can be removed by removing one screw from each of the screwdrivers.
It is still totally bright. The low power consumption eliminates flickering even when Idling.
View detail
LED is still bright
Change from OEM. Lit from the same location and the result was bright enough to illuminate the leaves on the tree in the back. Very good. View detail
I am satisfied with the light distribution.
I have been using Chinese for VehicleLED bulbs in MT25.
The Cutline was generally working, but there was a little rose in light distribution and I had been using it for 3 years, so I replaced it with RIZING2 H4 Hi/Lo this time.
The brightness from the front was brighter than the Chinese one, but the Cutline is well produced and the brightness is even etc.
MAJESTYs are also scheduled to be replaced next, but I am wondering whether RIZING2 or RIZING3 is the right choice.
RIZING3 is said to be brighter, but considering the cost performance, I wonder if RIZING2 is sufficient.
View detail
Affordable and easy to install.
[How is it used?
OEM I just wish it would lighten up just a little bit more." When I tried to replace the Headlight Bulb that looked like a The price of LED Headlight is getting Reasonable these days..." That's why I bought this product.
Was the one you received as per Image?
It was a little larger than I had expected, but I didn't mind, because the SEROW & XG250 TRICKER are old-fashioned headlights that refract light on the Glass Lens side, so Valve's design is not visible.
Was the installation difficult?
It is not a type with large cooling fins, ballast, or special wiring like the LED headlight bulbs of a while ago, so those who have replaced the valve of a normal Halogen headlight can replace it without any problem.
How was your experience with it?
Once installed, they are treated like Halogen head lamps, just like they were when they first came out. It's a little dark when you just turn it on." There is almost no discomfort.
Furthermore, as mentioned above, the headlight of the SEROW & XG250 TRICKER is a traditional headlight with a diffuse refraction on the Glass Lens side. The light diffusion is wrong." There is no discomfort in the illuminated area when driving at night without any obstruction.
[Included Parts:were they on?
There is nothing in the HeadlightBody other than a simple Instruction Manual enclosed.
[Was there anything that disappointed you?
It seems brighter than the OEM product HalogenHeadValve (although there may be some illusions because the light has changed from orange to white), and I can drive more safely at night than before.
All you have to do is replace the Valve." I think it is enough to make such a difference in the products of the company.
Since the exchange. Driving at night when it rains." has not been implemented, so I will refrain from providing a Review of that area.
Other items that would be helpful
Point and hang of installation
None in particular, depending on the type of car. Until the headlight lens bulb is removed. may be more difficult.
[Availability and clarity of the Instruction Manual
A simple Instruction Manual is enclosed, so those who have experience in Headlight Bulb replacement should have no problem. If you don't understand the instructions on the back of the box or in the instruction manual, don't bother. A good friend or PRO." Ask the
[ITEMS TO BUY TOGETHER
Not particularly
[Opinions and requests to Manufacturer
I appreciate the easy-to-afford pricing.
View detail
Fits: HONDA PCX125, HONDA PCX150, HONDA LEAD110 EX, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50, SUZUKI ADDRESS V50 G, SUZUKI ADDRESS V50 G, SUZUKI LETS4 Basket, SUZUKI LETS5, SUZUKI LETS5G, HONDA SUPER CUB110
50Meter
Running 50Meter and light bulb out. View detail
Consumption current Save is the main objective
I was not dissatisfied with OEMHalogen since I rarely ride at night, but I wanted to save a little current consumption since I installed various electrical components and I liked the white light of Rizing1 on my previous Motorcycle, so I replaced it with LED on Vst650 as well. The reason was that Rizing3 was released and Rizing2 became a little cheaper. The replacement was quite a large problem, because the high beam can be replaced by inserting a hand under the cowl, but the low beam on the top side cannot be reached without removing the cover and the meter assembly next to the tank. Fortunately, there were instructions on Net, so I used them as a reference for the hanghang work. I marked the optical axis with masking tape on the wall of the garage and set it to the same optical axis as the NORMAL one, but when I ran the car, it might have been better to set it a little lower. It is a hassle to reattach and detach all the parts again, so I am riding as it is, but I know how to do it once, so I may readjust it in the future. The brightness did not change dramatically, but it is brighter than NORMAL and I am satisfied with the extra power. View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
Easy to pimp as the product name suggests
Power consumption is drastically reduced and brightness becomes about 1.5 times brighter.
White light increases wave visibility and
Now you can drive safely at night.
I don't know how durable it will be, but I'm just getting started.
I hope it lasts.
View detail
Great visibility and cool colors!!! Power saving!
Navigationetc., various electrical power-hungry parts are installed externally, and the cowl of the headlight part of the SL is damaged.
I introduced this product in order to suppress the "white light". It is brighter than I had imagined, the color is bright white and beautiful, and it has a moderate presence.
It also grants safety. If you're already used to this White, good-looking Light, the OEM's tacky, dark
I will never go back to Halogen bulbs! It's a RECOMMENDATION!!!!!!!!!!!!!!!!!!!!!!!!!!
View detail
Recommendation to the vehicle with no Space behind Valve.
I chose this one because it can be installed without modification because modification of covers can cause problems due to dust and water intrusion. The brightness is also sufficient. View detail
Brighter than Halogen bulb
Headlight of ZrX1200 DAEG is dark with Halogen, so it was replaced.
The replacement itself is easy, but the slot is a little tight.
As everyone has said, I am worried that it will be damaged when I pull it out, but I think that when I pull it out is when it is broken, so I will not worry about it.
The brightness is only brighter than NORMAL, but considering the price, it is acceptable.
How much more is there to go?
It is LED, so I expect it to have a long life.
View detail
4500K It could be used for X11.
I was looking for a Halogen color, but it was difficult to find one with a small heat sink for motorcycles.
I had no choice but to buy this 4500K, but I managed to get a Limit bulb-like color, which is a good match for my old Motorcycle.
Space and shape were not a problem.
View detail
Fits: HONDA CREA SCOOPY, HONDA CREA SCOOPYi, HONDA GIORNO CREA, HONDA SMART DIO, HONDA SMART DIODX, HONDA SMART DIOZ4, HONDA DIO, HONDA DIOZ4, HONDA DIO, HONDA LEAD50, HONDA SPACY100, HONDA LEAD 100, SUZUKI ADDRESSV125S, SUZUKI ADDRESSV125SS, YAMAHA JOGDELUXE, YAMAHA JOG, HONDA DIOSP, HONDA DIO-ZX, HONDA DIOS, HONDA DIOJ
YamahaJOG (AY-01, 2018) Replacement HeadValve
Valve replacement is easy. However, I had to be careful not to break my fingernail when removing the headlight cowl cover−. I think the 4500K color tone is more visible and easier to see in the rain and at night, so I would like to see it added to the lineup. View detail
bright
I have not tried the AssistHigh beam yet, but I would like to check it out in the future. View detail
Processing is required for SR.
[How is it used? Day Trip Touring
Was the installation difficult? The SR light unit is too tight and needs to be filleted. Also, the three claws are thicker than Halogen bulbs, so they are not lockable, and must be filed or grinded.
How was your experience with it? It is much brighter than the Halogen bulb and the cutline is comfortable. The light axis remains the same and is large and sturdy.
[Opinions and requests to Manufacturer 4500K. "Light bulb color." is impossible.
View detail
Bright, but the optical axis is delicate.
This is a replacement from God of thundergu 2.
It is used in combination with RayBrick's corner eye Reflector.
The light axis was perfectly aligned on the Tester for God of thunder 2, and the night illumination was also perfect.
After replacing with God of thunder 3, the optical axis became higher (like high beam even though it is low beam) and I had it checked by Tester and it was perfect on the Tester.
Therefore, we have no choice but to lower the optical axis to a very low position.
I have to adjust it again at Tester when I inspect the car.
The brightness is very much brighter than the God of thunder Gu2, making nighttime driving much easier.
However, compared to God of thunder 2, which is evenly illuminated, God of thunder 3 seems to have scattered light (there are some oddly bright spots).
As a result, I thought I didn't need to bother replacing it if it was from God of thundergu 2.
View detail
Wiring is long!
The heat sink is also quite large, so it's a pain to make space for it, but compared to the LEDs of the pontoon type, it brightens up to a level that anyone can see, but if you are replacing the God of thunder 2, you won't feel it that much. The H4Type's AssistHigh beam is very helpful.
Well, the problem is the price... if you're looking for a good price, I'd say God of thunder 2.
Since there is no plating on the body, the valve is fully visible with a multi-reflector, so it looks cheap.
View detail