Reviews
For the price …
It is good for the purpose of at least STAND-UP the front, but the texture is subtle.
It rusts easily and the part where it is installed on the ground is worn away.
I thought it was CHINA.
There was a distinct lack of boss variety, and Grom needed a dedicated Adapigoo. (It costs about 5000 yen, so I made it myself)
View detail
-
--------------------------- View detail
I like that it's light and doesn't take up much space.
I have been using JTrip's STAND before and after for my 3.5 liter class, 250 class and NSF. It is very light due to the material. It also does not take up much space in the Transporter. However, I can't deny the instability while using it compared to JTrip's product mentioned above. That's why I gave it a Point4. I can't help it because of its shape. It also requires a certain amount of physical strength when you want to lift the vehicle. Women may find it a bit large. That's why I chose Point 3 for the work kill. However, JTrip's products are stable, but they take up a lot of space when stored. So I think you should choose one depending on your purpose. I am also satisfied with BF products. View detail
J-TRIP Front stand Used for GSX-S1000 2015
I had the same J-TRIP product on my rear stand, so I bought this one.
I chose this one for my wife. It's so easy to use! It is very easy to use. Caliper removed during brake maintenance
The hook of Stainless and the point where the Elastic band is attached to the Body to carry in the folded state to hang the
I appreciate the care it takes to get it right. It is higher than other similar products, but I choose this one. The boss is also available for each car model.
It comes with several types, but my GSX-S1000 (2015) was Up possible without using any particular boss.
View detail
Maintenance
It is used for Maintenance of Front.
The Pipe looks strong and looks good, but it will rust with long term use.
It would be better to maintain it so that it doesn't rust.
The price is a bit steep, though.
View detail
Finally changed Spec.
It is the J-TRIP of the industry top in the domestic product, but it was feeling regrettable with the cheap construction of the detail which seemed to be the one which had been sitting on Share until rather recently. The Nut which is used was especially touched with concern.
I don't know where the pride in calling oneself a domestic product lies in the spec. that says please use a normal Nut with a seat that is also used for a flat seat surface for a cylindrical Pipe.
With the recent Spec. change, we finally started to include a special Nut to match the Pipe shape.
There is a sense that this is one of the reasons for the price increase, but well, I feel that it is no longer intensely inferior to the others.
View detail
STAND is necessary for Maintenance
When it comes to STAND for Motorcycle, it is J-TRIP, but I bought Plating Specification which has high quality among them.
Plating is 10,000 yen more expensive than normal painting Type, but I thought Plating is better for long term use.
View detail
Is the paint a little weak against scratches, etc.?
If you do your own maintenance, it's a large convenience!
Please note that this product cannot be used for the type of vehicle which does not have a hole in the under bracket under the Top Bridge.
View detail
Convenient!
It is useful in Maintenanceetc.
Recommended
View detail
Unit B2510 Front Stem Upstand
I bought a front roll-up on a YAMAHA YZF R1. The tackle is very good to use. The kit includes instructions and fasteners for different motorcycle manufacturers. I recommend everyone to buy, especially those who service their own motorcycle. View detail
Unit Unit B2510 Front Stem Up Stand
ZX25r I bought it because I needed it to replace my Handlebar.
I was able to use the special tip separately without any problems.
Very convenient
View detail
Unit B2510 Front Stem Upstand
I've never had a motorcycle front slide. I wanted to buy for a long time and still bought it. And now I have no regrets. Honestly, at first, I could not understand how he would hold the bike, since there are no restraints. But it turns out he holds the motorcycle under his weight. Now I can easily change the front tires, disassemble the fork. He is the right thing for your motorcycle. Recommend! View detail
Plating rusts too if left outside for more than 10 years lol.
I bought it when I used to ride NSR and it was abandoned 10 years ago. View detail
Well, I guess I'm glad I bought it.
I was watching World Endurance and SBK and saw that they were using similar Items, so I decided to go for it!
I may remove the Tire, but I don't mess with the Fork.
I'm satisfied with this product, but the instruction manual...
The explanation of how not to do this is good, but there is almost no explanation of how to use it.
The work is easy, but there is a certain amount of hang because it is a tool to lift heavy things.
If you hit the bottom of the fork at the wrong angle, it will slip and fall.
Well, the vehicle itself doesn't fall even if it fails because it is used together with the rear stand.
Also, the paint on the part of the body that touches the ground seems to peel off when the body is raised, so I'd like to see a new twist.
View detail
Reliability and ease
I bought this for my ZX-25R because I want to do front related maintenance.
I have already purchased the rear stand, and unlike the old days, the spec. of the V receiver etc. has been added.
Although it became possible to work quite easily, I was still nervous to lift it.
In comparison, the Rear is so easy to lift with just your fingertips, let alone one hand.
I was out of sync.
In order not to interfere with the Front Fender by hitting STAND.
I'm going to cure it, but the gap is really narrow here, and if it's a stiff and slippery Toweletc.
On the contrary, it becomes difficult to work. This is the only point to note.
Nowadays, cheap STAND is sold by other manufacturers, but I dared to choose expensive J-TRIP because
This Motorcycle J-TRIP vehicle was on display at Events.
The Staff was very helpful and promised to always buy from them! (Lol)
The structure is simple, so it may not be particularly outstanding in terms of performance.
I felt the reliability of a place that has been making them for a long time.
The price is the same, so it's nice to be able to choose various Coloring.
If I could make one request, I would like to see something that can be used for Off-road vehicles.
I probably checked all the manufacturers, but there were none.
Because it is unstable in Center UpSTAND at the time of the maintenance that removes the Fork of the Off car.
View detail
I knew it was J?TRIP!
I bought this for FrontMaintenance of my SC82 CBR1000RR-R.
Unlike the Fork up stand, the Stem hole is used.
It is also possible to turn off the Handlebar somewhat.
It comes with a JHook which is useful for maintenance of the brake caliper as well as removing and installing the tire.
There are some improvements in the new Type, and the usability has been improved.
View detail
It's available for the 2021 model year!
When I first received the product, the tip did not fit into the hole, but when I inquired with the Manufacturer, it will fit into the GSX-R125 of the 2021 MODEL in terms of Size. However, when I asked the manufacturer about the size of the hole, he said that it would fit into the 2021 model GSX-R125, but because it was manufactured overseas, there might be BALI in the hole. So, I removed the BALI from the hole, and tried again.
You're the man, Westpower! The stuff is solid and the service was great.
Currently, once I'm in it, the rest of the time it's easy to use.
View detail
If you remove the headlight, you can use STAND safely, but it takes up a lot of space when you store it.
Purchased for front side maintenance.
It has a simple structure, but it will stand firmly.
I think the Rear Stand is essential when using it.
Insert it firmly into the StemBracket.
You may be able to use it without removing the Headlight, but I'm afraid to, so I always use it without it.
Grip is not glued in place, so you'll have to glue it yourself.
It's hard to find a good place to store it when not in use. The Arm is in the way when it is assembled.
It's a pain in the ass to disassemble every single thing... while similar STANDs from other companies are unobtrusive!
View detail
Fits: YAMAHA YZF-R25, YAMAHA YZF-R3, YAMAHA YZF-R3
It can be used for the current model without any problem.
I've been using it on my current model since 2019 and it works perfectly fine.
I think the ease of use is the same for all models.
By the way, I used it for many years with Ape 50 and CB400SF.
View detail
J trip for peace of mind
The price is high.
Used for long term storage in winter
View detail