Reviews
It helped me in a tight spot.
I used it on a Yamaha '82 POPGAL that a friend of mine had requested for repair.
I removed the tank and put a tacho string through the nut and shook it well to remove the large rust, but it was difficult to remove the thin rust. I had a few filters on the parts shelf in the garage, but I couldn't install the cover because it was hard to get into the POPGAL's narrow frame gaber.
It is really easy to use, and without this Filter, I had to turn the fuel Pipe longer to keep it from kinking, which is a big help, and it seems to collect a little rust in the Tank, which is great, and the Filter is transparent so I can see it better and replace it when it gets dirty.
It would be helpful to have a product with a little more capacity.
View detail
Filter exchange
Easy to install and a good product. View detail
carburetor-friendly
Used for TACT CourregesA-AF09 in 1985.
My brother-in-law gave me a TACT almost 30 years after it was scrapped and I serviced it, but the inside of the tank was rusty. I cleaned it with Gasoline and wiped it down with Dustcloth, but I could not remove the fine rust.
The rust and garbage are removed very well, but I think I need to replace about 2 more tanks because there is a lot of rust on the tanks.
Installation takes less than 10 minutes because all you have to do is insert a spot between the tank's gas outlet and the carburetor's fueling port. It is recommended that you check the outer diameter of your car's gas cock and the space available for installation before purchasing the filter.
View detail
Fits: KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1 (900SUPER4), KAWASAKI Z2 (750RS/Z750FOUR)
Good and close to OEM. Would buy again.
Good and close to OEM. Would buy again. View detail
Fits: KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z400FX/Z400J, KAWASAKI ZEPHYR400, Others CRcarburetor, Others FCR Carburetor Bodycarburetor
Good and close to OEM. I would purchase again.
Good and close to OEM. Would buy again. View detail
It is soft and easy to use.
It is a little thicker than Kawasaki OEM parts, but I felt no discomfort in wearing it. The length is different between No.1 and No.4. View detail
It was not Fuel Cock.
From the beginning, the fuel was unstoppable.
So I repurchased another company's product.
View detail
Fits: HONDA CUB-based Engine (CD), HONDA CUB-based Engine (CL), HONDA BENLY90 S, HONDA BENLY50CD90, HONDA MONKEY, HONDA APE 50, HONDA MONKEY, HONDA GORILLA, HONDA APE 100 TypeD, HONDA GORILLA, HONDA APE 100
03-03-004
I'm fine-tuning my Monkey. After increasing the engine power, there was a problem regarding the lack of fuel capacity of the factory system. This crane satisfied all my needs, the problem with the lack of fuel at high speeds disappeared. There were no problems with the installation. View detail
Since the new carburetor was of this inner diameter.
The new carburetor hose was this large size, so it is well made and the price is reasonable. View detail
Be careful how you handle it or it will crush you.
I purchased this product for the installation of a Fuel Filter.
Because of its thin wall thickness, tight handling will cause the hose to collapse and reduce the flow of Gasoline.
I find it convenient to be able to visually see the flow of Gasoline due to its translucency.
It is not as durable as Rubber hose, but I think it is unlikely that you will run out of this one purchase.
View detail
Foreign objects can be visually identified.
There was a sign of rust inside the Fuel Tank, so I installed it to check.
The high transparency and clear view of the interior made it easy to check for foreign objects.
I was worried about deformation due to heat, but there were no problems even after running around all day in mid-summer.
View detail
It is not very durable, but it does the minimum!
[How is it used?
Breather Hose 650mm 6mm Diameter from Tank has deteriorated, so a new Breather Hose was purchased.
This length was selected because the length must be long enough to allow for the need to make additional connections.
How was your experience with it?
When new, the softness and elasticity make it easy to install.
Although it is not suitable for places with high heat, it is Oil Resistant Hose, so quality is not a problem.
How did it compare to other products?
I appreciate the fact that I can buy it at Meter because other companies' lengths are too short. I think the black Fuel hose is more weather resistant, although it is more expensive.
[Points to note]
It is not very weather resistant and hardens after a while, so it should be replaced periodically.
Although it may not be of much concern to some, rubber parts inevitably deteriorate over time and should be considered consumable parts and replaced regularly.
View detail
Used to return air from Tokyo TowerImpulse's Fuel Tank and carburetor
I was looking for a replacement for the OEM Hose since it was discontinued.
I was looking for an Oil Resistant Hose with an inner diameter of 5mm and a thicker outer diameter, and this Universal Product came to my attention.
Needless to say, the reason for making the external shape thicker is so that the hose band can be tightened more effectively.
I used the OEM 8mm outer diameter and attached it.
I would like to use it for other Motorcycle Repair as it is very cost effective and I have some left over.
View detail
Fits: HONDA STEED (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA STEEDVLX (STEED), HONDA STEEDVLX (STEED), HONDA STEED (STEED), HONDA STEEDVLS (STEED), HONDA SHADOW <400> (SHADOW), HONDA SHADOW <400> (SHADOW), HONDA CBR400R Limited Edition, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR400RR, HONDA CBR600F, HONDA CBR600F, HONDA CBR600F, HONDA CB-1
Cospa best
The size feels the same as the OEM product, so I have no problem installing it. The price is much lower than the OEM Product, so I can recommend this product. View detail
Nice touch!
Replaced because OEM was deteriorating.
It became transparent so that I could see Gasoline flowing and visually moe Point!
Cheaper and more satisfactory than OEM
Of course, the OEM band cannot be used because the size is different from OEM, but to prevent loss, it was attached as it is.
I'm not sure about the durability yet, so 3 stars.
View detail
Fits: KAWASAKI Z1000 (air-cooled), KAWASAKI Z1000 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750 (air-cooled), KAWASAKI Z750-D1 (KZ750D), KAWASAKI Z900 (KZ900), KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX, KAWASAKI Z1 (900SUPER4), KAWASAKI Z1000 MkII, KAWASAKI Z2 (750RS), KAWASAKI Z750FX
Will we know if it's good or bad after riding it for a while?
I put it between each Carburetor from the Fuel Cock, but the Filter itself is Slim, so it doesn't feel out of place.
I think it is a good product because it is transparent, making it easy to detect foreign objects.
View detail
Convenient to have
I bought Repeat because I lost it when I caught it on a tree while driving in Woods. There are short ones that do not use the Stem hole, but I use this one because I do not have to worry about where to put the cap when refueling and it does not get dirty. View detail
Fits: SUZUKI RMZ450, HONDA CRF450RX, SUZUKI RMZ250, HONDA CRF450R, HONDA CRF250R
InjectionMachine Essentials
This is the most effective item for preventing fuel pump clogging. We had been using a filter made by another company, but its low fuel permeability made refueling time-consuming. This product is highly permeable and allows for smooth fueling, thus shortening the time required for refueling. The lower part of the filter is wider, which prevents it from floating up, and the amount of gasoline can be easily checked from the refueling port. The durability of this product is also high, as I think it will not deteriorate under normal use. View detail
สินค้าและการจัดส่งดี ไม่ผิดหวังที่ใช้บริการ View detail
Fits: HONDA GORILLA, HONDA GORILLA, HONDA MONKEY, HONDA MONKEY
ใส่แทนของเดิมได้เลยครับ สำหรับ mnokey z50 View detail