Reviews
Easy Texture Up!
[How is it used?
Street Riding Main
Was the one you received as per Image?
It was better than Image.
How was your experience with it?
it's the best
[Points to note]
positioning error when pasting
To be honest, I wasn't looking for texture until I got the product.
In fact, the texture and the look after installation was great!
I got a really good deal.
View detail
SUZUKI Grip Heater
The product is defective. Suzuki service center says grip heater controller is bad Please send parts to Grip Heater control.About quality and texture View detail
More GSX1300R HAYABUSA-like?
I am really glad I installed it first.
Not Tandem.
It is best suited for those who do not carry luggage.
It looks great.
I thought it was more GSX1300R HAYABUSA-like.
Tail cowl must be removed for installation.
There is an instruction manual, but I watched a video on Youtube and studied it to some extent before I put it on.
If you have installed the Fender Eliminator Kit before, it should be easy.
Don't forget to change the seating capacity on the vehicle inspection certificate if you want to put it on after the car is delivered!
View detail
Easy to install and look great
In addition to the main functionality of the sliders it is very easy to install (provided you have the tools) and look great as well. I highly recommend this set for the GSX-S1000 GT+. View detail
Easy to install and look great
Same as the rear axle sliders, these are easy to install and look great, while providing the necessary protection for the axle. View detail
Top quality side panel enhancement
Very nice product. It make the bike look sporty. Really good quality at a good price. Shipping was fast and value for money. View detail
Fits: SUZUKI V-Strom 650, SUZUKI V-Strom 650XT, SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650
SEA BASSOEM Attachment Bar
For attachment installation and protection of standing chutes from damage.
Purchased using webikePoint after delivery. The order arrived quickly.
It was well made, well shaped, and unexpectedly lightweight.
Installation is no problem with a translated Instruction Manual, which can be found by clicking here. You will also need a torque wrench and screw lock.
View detail
Great looking and original design
I love the fact that this is a original part number by Suzuki! The sticker is very high quality and fits beautifully on the tank cover! View detail
Fits: SUZUKI Bergman 400 ABS, SUZUKI Bergman 400 ABS
Reliable OEM
I was worried about GIVI and Puch, which are obviously Longer and cheaper than OEM, but I decided to buy it because it is a reliable OEM.
Installation was easy, as per the easy-to-understand manual, and the replacement was done simply by loosening the two screws and removing the eyebrows. Be careful with the well nut that holds the screen. Incidentally, the screws, washers, and well nuts are also in a quantity that seems to be a spare.:2 Sets are included in the package, which is quite kind.
The NORMAL was halfway long, and I got a lot of wind on my helmet, shoulders, and arms. The OEMLong is wide and curved at the top end, which reduces the wind especially on both shoulders and arms. I am 178cm tall, so please refer to my height.
View detail
SUZUKI Air Intake Cover
When you have one side not looking so good, why not just get a new one anyway. The cost was very good and better than I could get from the UK, like a thrid of the cost. Ok, shipping was extra but as I had other parts in the order, it all worked out brilliantly. Arrived with me within a week of ordering, very fast via Fedex Express. Packaged really well and no hint of any damage to the outer box or any of the inner boxes. Well, pleased with my purchase and now the bike looks that little bit better. Thanks Webike for the great service throughout View detail
The Rear area is expensive.
I installed this product to refresh the rear area. I chose this product because I did not want to use a bad Other Brand Product. I am satisfied with the quality and fitting, but the price is too expensive. I was surprised that it cost 20,000… dollars. View detail
Removing the cowl is troublesome.
Installation on GSX-S1000GT.
I have waited quite a while since ordering, but I can finally install it.
If I choose Standard Equipment, Motorcycle itself will not be delivered soon.
It was moderately difficult to remove Cowl on the first visit.
The instruction manual does not even describe how to remove it, so I had to make do with Net information, the Parts List, and the atmosphere.
Installation and wiring can be done without difficulty according to the instruction manual.
If you can manage to remove and install the Cowl, the installation is not too difficult. It is important to know the position of the removed screws and PushPlug. It will be difficult later. It took me about half a day as an amateur.
The performance of the Grip Heater is a type that warms up the entire circumference of the Grip and has three levels of temperature adjustment, which is typical.
The only way to check the operation status is with the LED integrated into the switch on the clutch side. The wiring on the Throttle side, if done as described in the instruction manual, looks like it has been retrofitted.
The only additional items needed are Bond and Grease.
View detail
the quality is unique
I am very happy to receive my parts other accessories. Thank you for the quality and your delivery is excellent. the quality is unique so far you are my favorites. in parts and quality nobody can beat WEBIKE View detail
Better than I expected
Purchased for Motorcycle practice, made in India
I wasn't expecting it, but it's not as noticeable as I thought it would be, and it's nice and small.
Effectiveness in case of tipping over will be adequate, but at this price it is sufficient.
It's insurance, only.
View detail
Finally, SEA BASS, too.
We have been using Honda's Sports GripHeater as a diversion, but this vehicle is an electronic Throttle...
Diversion is not allowed. However, SEA BASS has also come up with a good-looking Grip heater.
I ordered it in June and it was delivered in November...it's an unavoidable situation. Well, I am glad that it came before it got really cold. (If it gets really cold, I won't be able to ride much in the first place.......
Installation is easy as long as you follow the instructions in the thick manual (which comes with translations in about 7 languages (please type here)).
The Switch is in my hand and I can operate it without taking my hand off the Grip, and the Touch on the Switch is easier to understand than the one on the Honda.
The thickness is almost the same as NORMAL and the material has a good grippy feel. (Honda's material is thinner and has a slightly lower grip.)
I think I made a good purchase. The price is a little high....
The last thing you want to do is to have a Large! That is what we are going to test.
View detail
Fits: SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA)
SEA BASSMirror cover
Mirror cover of SEA BASSOEM, Material:It is Carbon Style. For the price, this is a satisfactory product. View detail
Type 2 GSX1300R HAYABUSA
I installed it on a 2nd model GSX1300R HAYABUSA, but the Master Cylinder also needs to be changed. View detail
easy to install
Center from top to bottomQuantity:1pc. so there are no gaps and it firmly protects the Tank from scratches. Pasting is also easy.:1 pc. thing, so it's easy. View detail
Satisfied
Everyone uses a lot of priests, but
I ordered it because it looked clean.
Tank pad protection, but...
When I do a knee grip, my thighs don't touch the tank.
Only the plastic under the tank has gas.
I want to put some stickers on the plastic.
I'm thinking hard about whether there's anything I can stick to ------------------------------------------ ---------------- Everyone uses a lot of priests I ordered the pure neat It's a tank pad protection, but ... If you do a niglip, the tank doesn't reach the tank. Gis is only in plastic under the tank. I want to put something on the plastic I'm worried about what's going to be something. Powered by Google Translator
View detail
I love it
The design is good and the quality seems good.
It's genuine, so it's better
Why does Suzuki Korea not have stock of various accessories?
Not only the tank pad, but also the heated grip
It's not easy to find all the screens.
In particular, the side box seems to be too harsh.
-------------------------------------------------- -------- The design is fine and the quality is good Because it's genuine, it's better Why is Korea Suzuki not in stock? Not only tank pads, but also heat grip It's not easy to get a screen or everything Especially the side box seems to be too severe Powered by Google Translator
View detail