Reviews
If you can get one foot in the door, you may not need it.
Purchased by Recommendation at the time of delivery.
Initially, it was used.
The footing has improved to the point that I feel less anxious when I back up while straddling the bike.
As for Demerit, the distance to Handlebar has also changed, and the load input from Seat has become weaker, making it harder to get Balance.
I was concerned about Demerit and returned to Normal seat.
If you are particularly concerned about footpeg with your feet, it is more stable if you sit more toward the rear of the Seat and put both toes on.
When I sit in front of the Seat, the footpeg is in the way, so I feel extra footing.
If you are about 165 cm, try this.
I felt that a Handlebar Up Spacer or something similar would be more effective than a low seat, as it would make the posture easier and allow the rider to sit more rearward with less anxiety.
I don't think it is necessary unless the footing is very Limit.
View detail
Diversion of 1000 to 650
As it turns out, it was not perfectly diverting.
To be precise, the Brake Side went on easily, but the Clutch Side did not.
You will need to create your own Bracket.
I chose it for its looks, but regretted it a little. OEMOption.
It also comes with a thick instruction manual, but it is almost useless. Therefore, there are some unusable parts left over.
View detail
OEM!
I purchased this product in the hope that it would be as effective as possible in preventing crime.
One drawback is that it is difficult to change the sound and volume of the Security Alarm, although it is not something that is changed frequently,
View detail
Simple and easy to use
It is really the smallest and simplest helmet lock. I am glad that it is inexpensive. I installed it on my Honda Giorno Grab Bar. Thank you very much! View detail
Standard Handlebar (22.2mm) Mounted on
Since MOTOCOMPO did not have a helmet holder, I added it to the appropriate place in the Handlebar.
Similar ones are sold on amazon for similar prices, but the Bracket is thinner and more flexible for installation.
However, the Fixing Screw on the bracket is exposed, so if you are concerned about it, you may want to replace it with a special screw. (I think the attached screw is just a Hex Screw.)
View detail
I can't get it to stick.
Even though I applied it as described, it still left a white residue. In addition, the bottom part does not fit the curvature well. In the end, I peeled it off and threw it away.
Ask Shop to install this product.
View detail
How effective is it?
I like the look of it. So far I don't mind the heat, probably because of the cooler temperatures. I'm wondering how it will be in the middle of summer. View detail
The appearance is more important than thermal protection.
I am satisfied but it is expensive.
It would have been 5 stars if the upper part of the Oil Filler Cap could be covered.
It's not Carbon, but Carbon-like.
I think it looks better Parenthesis.
View detail
Easy Helmet holder
It is a good and inexpensive Holder, but the drawback is that you have to turn the key to close the Hook.
It would have been better if the Hook could be locked by pushing it in.
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
OEM Product for Peace of Mind
The product is an OEM product, so it fits and works well, but it is not perfect. View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
To OEM installation instead of Option.
We replaced the OEM cap to improve its appearance. Although the shape is the same as the OEM cap, the chrome shine gives the GSX1300R HAYABUSA a slightly more luxurious look. To install, simply replace the OEM O-ring with this cap and turn it. View detail
Fits: SUZUKI Hayabusa GSX1300RRRQM2, SUZUKI Hayabusa GSX1300RRRQM2
Oil leak?
I have been using this product for about 200 km after installation and when I came back home, I found that the oil was leaking.
Do I need Gasket? I'll give it a few more days to see how it goes.
View detail
good product
Thank you for the fast delivery. I feel good that the correct parts are delivered. I'm glad it's an accurate part. Have a nice day! View detail
I'm glad I put it on.
I installed it myself, but it is safe to ask a reliable Motorcycle shop to do so. View detail
Helmet holder
Option parts for SUZUKIOEM.
Fixed Band, Bolt is Material:Stainless Steel eliminates corrosion concerns.
As an OEM Product, it seems to have been sold before Large.
It is less expensive and better than what is available in Option these days.
View detail
Item is smaller than advertised
Buy 1 or 2 sizes bigger as it is meant for the generic slim-fit Asian body. The material is great and the pockets are functional but the zip is too high and so is the waistline. Elastic under the arms is not sufficient View detail
In memory of SEA BASSMotoGp.
Unfortunately, our SEA BASS has withdrawn from MotoGP.
Whether or not it was the fastest Machine, the 2020 MotoGP Champion of the Year will remain the official record.
I bought this ChampionVIAjug to commemorate the occasion. When you drink a good beer, remember that SEA BASS won the MotoGPChampion.
View detail
It is stiffer than OEM, but the texture is good and well made.
Simple and casual "HAYABUSA" Logo of is good.
Is the SIDE material made with an anti-slip effect in mind?
View detail
These days, on-board tools...
Since recent motorcycles do not have on-board tools, it is difficult to adjust the Mirror when out and about. It would be a relief to have an on-board tool. View detail
cost effectiveness
There are cheaper Windscreen products from No Brand, but I feel that they are troublesome to install. This product was easy to install, even for a beginner like me. It is a little (a lot) more expensive, but I am very satisfied. View detail