Reviews
Good for dress-up purposes.
I installed it myself on a GSX-8S.
Two locations are co-tightened with Meter Bolt.
One of the holes needs to be drilled in the cover underneath, but I didn't want to drill a hole, so I used double-sided tape.
I drive on highways and other roads and have no problem fixing it.
View detail
GSX-8S
I was able to install it on a GSX-8S Tank without any problems. View detail
Self-assertion is a Large thing.
There is a gap between the pads, but it does not affect the tank protection. View detail
The texture is good
The texture and feel are OEM, matching that of Cowl. The Silicon one made by another company would be a safer choice for those who drive on circuits as well. The installation was done by Red Baron, but the factory manager told me that the installation was very difficult and that I should rest for 24 hours after the installation. Overall, I give it 4 stars. View detail
Highly recommended OEM item
Highly recommended, Stand is easy to fit as it is an OEM item both the correct holes and mounting for spring are already there. As another reviewer stated fit the rubber stop last (great addvice). Delivery was super quick within a few days from Japan amazing. View detail
For Maintenance
I bought it for Maintenance in conjunction with my Motorcycle purchase and managed to install it myself.
It is useful for Chain Maintenance.
It is also used to check the OilLevel by putting in new Oil, as I do Engine oil change by myself.
Flat Garage (Check by placing a level on the floor) to put up the Center Stand, set the Motorcycle vertically, and check OilLevel.
With only the Side Stand, it is difficult to check the Level while holding the Motorcycle vertically by hand. It is very difficult to check the Level while holding the motorcycle vertically by hand with only the Side Stand.
Quantity:Pair (for Left and Right) The Level can vary from large to small depending on the subtle tilt of the The method of holding it by hand can only make it somewhat vertical. (Lol)
For the installation of the Center Stand, we took advantage of the wisdom of our predecessors and installed the Rubber later and managed to install the Spring using the principle of Lever for the Driver. It is so rigid. (Lol)
It is useful for maintenance, but it is still Minus that makes it difficult to get Side Stand out.
View detail
Improvement of riding posture
Shallow knee and ankle angles when riding did not cause pain even after riding for a long time View detail
Purchased high seat after a long struggle.
The seating is so much more comfortable that I wonder why it's not standard.
But I'm 165cm and have short legs, so my footing will be very bad.
With the standard seat, I was able to get a little bit of both feet on the ground and one foot on the ground, but with the high seat, I was able to get a little bit of one foot on the ground and both feet on the ground, no matter how hard I tried.
View detail
It's too small! It won't fit in! Excellent!
I installed it on my K50, and since it only needs to be tied to the carrier with a Belt, I think it can be installed on basically any car model with a Rear Carrier.
Well, as you can see from the Large body, it's more of a bell fungus than a storage (Lol) It's Collector's Items for. No capacity, no waterproof, no security, only SEA BASS Logo mark. What a great product! If you think that the six letters of "SUZUKI" are worth 3,600 yen, you will not lose anything by buying it!
Oh, by the way, if you install it on your Zero Motorcycle, you can ride around the neighborhood by hand. Yes, it's a "bonus".
View detail
Stable OEM Products
Exactly fitted.Seat is ScrewQuantity:It can be removed with 2pcs, so the process is easy and quick. A slight cheapness cannot be denied, but the price is inexpensive and at least you won't lose anything by putting it on.
If I may say so, I felt that the Logo of SEA BASS is smaller than SeatBody, so it is difficult to see from the back. …What? You don't want me to show it? I see….
View detail
It's fine …
It's fine, but …I think it's going to have a Daytona Attachment Bar on the BURGMAN 200.
I have the impression that it is very expensive, and I regret that I should have bought the cheaper Universal.
The product itself is solid, so it's not a failure, but I can't shake the feeling that it's not quite right.
I think you can wait until the Other Brand Product comes out, or you can use the Universal Product that attaches to one of the Mirrors. Not recommended.
View detail
Good shape!
Masking tape was used to come to the center
Degreasing of the sticking area was also performed.
It's been two months and no peeling at all.
Texture is very good
A little expensive.
View detail
This is a Meter visor, so w
Mounted on New Model Blue
The screen of the New Model KATANA is available from various manufacturers, but all of them have a long and almost vertical angle, so it is not suitable for the New Model KATANA, which is short in length, even if it is suitable for the old KATANA.
This product is loose in angle and short in length, and more importantly, it is a ManufacturerOEM, so it is highly reliable, and when I installed it, it was almost the ideal shape.
The wind protection effect is honestly? But I don't expect it to work in the first place, so it's not a problem (laughs).
The name of the product is also "Screen" this is not to say that Meter visor." That's why.
It was good to purchase
View detail
Fits: SUZUKI DL1000 V-STROM1050XT, SUZUKI DL1000 V-STROM1050, SUZUKI GSX-8S
Wow that's cool
First of all, four holes needed to be drilled, which required a shoring tool, but I drilled them with Impact while holding it from the back with my hand. I was able to drill the holes easily, but the installation of the screws was a little gapped, and although they were slightly gapped, they were firmly fixed in place.
Because it is a soft bag, it is difficult to feel how it is secured to the tank unless you open the bag and press it down each time.
The capacity of the bag is large, but I have the impression that it doesn't hold as much as I expected:about the same as a wallet, plastic bottle500, or mobile battery.
The design is good because it is just Parenthesis good and looks good on Zuzuki cars.
It would have been better if the price was a little gentler.
View detail
suzuki gsx s 125 center stand
really glad i purschased this stand. really can't understand why suzuki gb stopped importing this item. I ordered expecting a long wait with japan being along way from uk! I was wrong they posted it stright away on the 8th and i received it today 13th june! quicker than alot of parcels sent witin the uk. I had read the reviews on here and like another customer commented leave the rubber stop until the last job as it makes it alot easier putting the spring on which i wrapped a piece of old electric wire round it and easily pulled it on. only took me 5 mins from start to finish,and probably only 2 mins if i had to do again! very happy with it.I can now see my oil and coolant level just by glancing down at them,and just gave the bike a wash and leather,it was so easy with it been upright! if your thinking of getting one stop thinking ,just buy it!!! View detail
VSTROM800 Center Stand
STAND is too high and front/rear Balance is not good.
The center of gravity is on the Front side.
View detail
Mounted on V-STROM800DE
The S company's website for FOR JAPAN MODEL does not list any options, but I was able to confirm it on GlobalSite, so I purchased it from Webike, which has it in stock. View detail
Fits: SUZUKI Let's 4 Basket, SUZUKI Let's 4, SUZUKI Let's 4 Palette
Type to cover over existing Seat
I ordered it thinking it was for Repair, but when it arrived, it turned out to be a Type to be covered. (with built-in expansion and contraction band)
The proper installation method is to cover the existing Seat from the top to hide it, but I removed the old Seat cover and installed this Cover by fastening it with a Tucker.
Although LETS4 was not eligible for conformity, it was able to be installed on Beauty.
As noted in the instruction manual, the Trunk will be somewhat difficult to close after this is installed due to the thickness of the elastic band at the edge of the fabric.
There is no problem, as the lock is applied properly by pressing it firmly.
View detail
I installed it myself.
Large sturdy if you follow the Instruction Manual, although you do need to hang it when inserting the Grip. It is warm. View detail
It is worth a try.
My SV650ABS was delivered to me after the holidays. I had seen a lot of bad reviews of Seat on UTube before I bought it, so I asked for this product when I ordered the car.
I drove about 250KM with the normal seat after delivery, but I was concerned about the thinness of the seat surface and the restlessness of the buttocks, so I changed to this seat after the second drive.
I felt the hardness the moment I straddled the seat, but it was firm and different from the hardness of the Normal seat. I felt no discomfort at all.
Unlike the normal seat, my buttocks felt calm and the hardness I felt at the beginning became more comfortable as I drove longer distances.
The third time I tried it on my usual mountain pass, I was very impressed with the Gap of the buttocks during Breaking and the fit during Cornering. I wanted it to slide a little more when shifting weight because the fit of the buttocks was too good.
I have just finished breaking in the Motorcycle, but I would recommend purchasing this product from a cosmetic point of view rather than modifying a normal seat. The SEA BASS lettering on the back may be a matter of taste.
View detail