Reviews
Same for Mr. K
I agree with K on the word of mouth
No word of SUZUKI anywhere!
There is no OEM feel to it
Is this really OEM?
Is that why this guy is the only one cheap?
View detail
ManufacturerOEM and car models only..
I bought this product because there was no other manufacturer's product to choose from, which is Rival
It's certainly in the shape of a storage space, but modern motorcycles have a storage The space is three-dimensional and unevenly shaped, and the price is relatively high in SEA BASSOEM So I was expecting to use it for car models only as far as the unevenness is concerned, but it felt like a flat Seat
Material is a soft cloth? Leather? So I guess you can put an object on top of it and crush it, but the part that floats is still floating It's a cheep...
View detail
Suzuki Carbon Frame Cover
Expecting nothing less than excellent from a Genuine Suzuki product. 100% perfect quality and fitment, the shipping was super fast too. Would recommend A+++ View detail
Perfection
The position of the helmet holder on the SUPER CUB 50 is
I'm using this product on my Rear Carrier because it was too low
I'm using it painted in Black
View detail
Fits: SUZUKI DL1000 V-STROM250, SUZUKI Vstrom 250, SUZUKI Vstrom 250
Bolt breakage
When the key cylinder arrived and I installed it and tried to tighten it with the specified torque, the bolt broke off Yes, sir! Quality is not good
I'd like to see it made a little better
View detail
Ideal for ChainMaintenance
It is easy to use for ChainMaintenance and checking the amount of engine oil It was difficult to install the spring, but I managed to install it by myself by making a bunch of fishing line and pulling it I was able to View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
It's good for Upright positives
I didn't like the position, so I reattached it twice, but it's still perfect! I'm sticking around 。 The quintessential OEMQuality
The vertical dimension was not enough, so I extended it with Clear Seal It is
View detail
Fits: SUZUKI GSX-S1000, SUZUKI GSX-S750, SUZUKI GSR250, SUZUKI GSX1300R GSX1300R HAYABUSA(GSX1300R HAYABUSA), SUZUKI DL1000 V-STROM650XT, SUZUKI DL1000 V-STROM650, SUZUKI DL1000 V-STROM1000, SUZUKI DL1000 V-STROM1000XT, SUZUKI DL1000 V-STROM800DE, SUZUKI GSX-8S, SUZUKI SV650X, SUZUKI SV650
Things are reliable
After attaching it to the tank, it is bent and the position is not good, but it was reattached twice for convenience, but now But it's sticking out beautifully 。 This is an OEM product with excellent quality for an expensive price! 。
The reason I re-stretched it is because the vertical Size is short 。 It's good for Upright Position people
View detail
Fits: SUZUKI SKYWAVE400 burgmanLIMITED, SUZUKI SKYWAVE400 burgman Type S, SUZUKI SKYWAVE250 burgman LIMITED, SUZUKI SKYWAVE250 burgman Type S, SUZUKI SKYWAVE250 burgmanType S Basic, SUZUKI SKYWAVE250 burgman TypeM, SUZUKI SKYWAVE SS
A useful and decorative item
Readers; I own a Burgman{USA name} 400 and wished to add some 'style' and protection for my feet and legs. Thus I bought this set. It came in very good time.It was well packaged and even had some English instructions that made sense to an English speaker/reader! Cautions first; these things LOOK like they can go on in several ways; only one is correct, so take your time and figure it out, before you make a mistake. Be sure to clean the body surface so the contact glue will hold. Measure where the brackets go, and you will 'know' from the 'feel' of it, if you are right, they really thought this one out correctly. Now the real caution; the fasteners are the common push pin/expand the center sort of fasteners. They work very well , IF you are very careful and do it PERFECT the first time. That I did not do. Here in the USA you can not go 'down to the Scooter shop on the corner of Chow and Main" and buy '40 of them for $02.00 USD' to fix your mistake. I have the Side Visors secured, and went thru the 'computer maze' of the contact page, to see if I can get more of them. They are not reusable. As to the cosmetics and such; they look very stylish on the machine. They do block much of the wind buffeting you have on your legs and feet. And better, the do not get in the way of your feet when you get on or off. SO they are a good value to the money spent, and I very much like them. View detail
Must-have item
It's OEM, so of course the colors match and the shape is good, but it's a little expensive, so why not make it a little cheaper? I'm not going to lie, I want it
It will look a lot cooler, so if you want to ride the GSX-R1000, it's a must-have item Isn't it!
View detail
for VehicleSmart keyHolder
I bought this for my SwiftSports Smart key
I like the fact that it can be fixed to the Belt The quality is also large
However, I would have liked to see a little bit more of the gold in the genus Smaller
View detail
This is much better!
In Ron Two, which usually goes by Seat
The unevenness of the seating position doesn't fit me
There was quite a bit of pressure between my legs
I've been shifting my hips frequently when I've been running
I was wondering if I should put a Gel Zab or something on it …
If you look at the pictures of the High seat, there is no gape in the seating position
Maybe this is a good one …?
So I bought it
I drove only 200 kilometers as soon as I could
It's such a comfortable ride that I'm asking you to put this on from the start
Or rather, I think it sits similarly to the previous DL1000 V-STROM
It's a little worse for your feet
Again, this one has the same feel as the previous DL1000 V-STROM, with the same footing
Aren't we the original OEM?
I'm tempted to say
Well, it's OEMParts, so the price is … right?
That's the kind of assessment I'm talking about
View detail
OEM peace of mind and blocking
The size is perfect because it is an OEM product If you can remove the Fork, you can install it without any problems
The Clamp is not the attached Gold component, but the Insulock Tie as others have done So, I decided to use only Black
I drove it about 200km after installation and it had some dust on it I'm not sure if this was on the bare Inner until now, but it has been protected You can also feel it
It is a resin, so it will eventually deteriorate The seams in the manufacturing process are also, well, material, so I don't blame them The appearance is up to your taste, but the functionality alone makes it a good buy
View detail
70
LETS4 itself does not have much space to store It will be more convenient to install an external rear box or LegInner Plastic bottle, perfect for storing long items If it rains, it will probably collect rainwater It's a good solution to this problem
The use is very good I'm glad I bought it
You need a lot of tools, and it is better to use a drill with a center It is "Woodworking Drills I am a Steel Drill without a Center No Center So I couldn't get the center and drilled a hole in a strange place I also tried center punching, but the Center is still not in the drill itself It's better to have It's a Screw with a hexagonal head Moreover, because it is a small place, Hexagonal Wrench "Bar Type It's better to have it so you can close it properly
View detail
Recommended
All motorcycles should have one. A motorcycle parked on a center stand takes up less room. A center stand is more stable than a side stand and it is useful for maintenance work. This stand fitted perfectly and was easy to put onto the motorcycle. View detail
High seat is good for long distance driving
The normal seat was a bit too tight for my knees to bend on long distance driving, so I used the high I bought a seat
The Seat height was a little higher, which made it a little easier, but not as much as I expected
The seat surface is flat in the front and rear directions, allowing you to move your seating position back and forth according to your situation, which makes it easier to run It's easy
The color of the middle band is the color of the XT OEM is Color:It was Gray, but the one I bought was Black, so it looked a little plain
View detail
Luggage rack for Van Van
Pretty nice rack. Two issues though. In the photo it looks chrome. It is not. It is silver powder coated. The brackets for the turn signals are not made the same as stock. Need modified. View detail
headlamp
because of product picture on webside,i thought the cover would be complete, but it is not,so for next time insert a more comprehensible product photo.thank you wery much View detail
I can not taste OEM feeling.
There is no character of SUZUKI anywhere in the Blister pack or the item Body.
Without mention of Manufacturer name and manufacturing place, only SUPER lock product name and MADE IN CHINA letters are sad and conspicuous. ? ? ?
the same "SEA BASS U Lock S" Products of the same name are in the same period, 1,737 (tax included) With those selling in, 3,024 (tax included) There is something that is on sale, I bought the cheap one, but if I purchase the higher one, it is Package with OEM saying something, or was there a letter of SUZUKI in the product?
I will even get a sense of being grabbed by something ? ? ?
View detail
Large big than I thought
Large is about +100? But it is quite Large. Because the OEM installation Screen is around 300 ?, it is about 30% bigger and it looks much different.
Regarding the running wind, Small seems to be getting worse, but the feeling received is without Large difference.
On the other hand, the running noise of Helmet became very large. It is Jet helmet, but it seems that the running wind started to hit Helmet.
From the above, I think that the wind that fits the body is getting smaller.
Installation is Large strange. I have a hard time finding the position of the hole.
It took about 2 to 3 hours and it is easy to scratch with Bolt when searching for a hole.
I am thinking to return to OEM installation.
View detail