Reviews
User-friendliness is quite good although it is ball pin hammer 12OZ (fiberglass handle)!! It is convenient that a hand does not become painful or is not numbed even if it uses, since it is [ a grip part ] soft. Since a size also has more than one,
User-friendliness is quite good although it is ball pin hammer 12OZ (fiberglass handle)!!
It is convenient that a hand does not become painful or is not numbed even if it uses, since it is [ a grip part ] soft.
Since a size also has more than one, I also regard that it can unite with a use as it being one of the charm.
View detail
It purchased for front fork seal exchange of RZ250. In order to separate an inner tube and an outer tube, it is necessary to fix the spindle in the back. Although substitution is also possible, it is convenient for positive removal. Isn't a 60
It purchased for front fork seal exchange of RZ250.
In order to separate an inner tube and an outer tube, it is necessary to fix the spindle in the back.
Although substitution is also possible, it is convenient for positive removal.
Isn't a 60-cm extension bar arranged even in the home center?
When required, the system of Webike which can be supplied is very useful.
View detail
The glasses wrench of a no brand currently sold to the home center etc. after all is differed from. It adapts itself to a hand firmly. Appearance is also good. I think that I will purchase other sizes.
The glasses wrench of a no brand currently sold to the home center etc. after all is differed from.
It adapts itself to a hand firmly.
Appearance is also good.
I think that I will purchase other sizes.
View detail
In the screwdriver in a narrow place, it is one indispensable article. A tip changes, and it has become a formula and can use the replacement head of six angles. Although there was a fault, like the head falls easily with the product of the other
In the screwdriver in a narrow place, it is one indispensable article.
A tip changes, and it has become a formula and can use the replacement head of six angles.
Although there was a fault, like the head falls easily with the product of the other company, since the maintenance mechanism of the ball type attaches this product at this price, there are no worries about omission of the head.
Since the set of the heads (for example, six angles, four angles, etc.) of other kinds stuck and the thing of the same price has come out from the other company, I think that eyes will perform almost all people there, but I think that this product is most excellent in cost performance if it says only by a main part.
I think that one piece may have.
View detail
It was used when removing a generator gasket full of a cover. Although it is a very ordinary rubber hammer, since the die length of a handle is comparatively long, it is easier to attach vigor than the thing of the other company. If the portion of
It was used when removing a generator gasket full of a cover.
Although it is a very ordinary rubber hammer, since the die length of a handle is comparatively long, it is easier to attach vigor than the thing of the other company.
If the portion of a rubber is merely somewhat softer than the thing of the other company and is used with all its strength, it will have collapsed with BOROTSU.
since the struck components are not stained with a crack, there is this now -- it is .
Probably, one may have, since a price is also cheap.
View detail
At a glasses wrench, an impossible place requires a spanner too. In fact, although it had the 10x12 double-ended wrench of KTC, if 10x12 glasses wrenches of a signet are purchased and used the other day, it is called good accuracy with texture, and at
At a glasses wrench, an impossible place requires a spanner too.
In fact, although it had the 10x12 double-ended wrench of KTC, if 10x12 glasses wrenches of a signet are purchased and used the other day, it is called good accuracy with texture, and at this price, cost performance will be quite good, the 10x12 double-ended wrench of a signet will surely become wanting, and it will purchase.
Since maintenance of the whole of about 40 percent can be performed with the spanner and glasses wrench of this signet, it is considerably found useful.
It stopped using the tool of KTC not much by favor ^_^;
View detail
The glasses wrench of the combination of 8x9 did not not much have a choice, and since it was the cheapest in it, he bought it. Since appearance is a chromeplating of mirror finish, it is beautiful considering a price. Although wrench parts are 12
The glasses wrench of the combination of 8x9 did not not much have a choice, and since it was the cheapest in it, he bought it.
Since appearance is a chromeplating of mirror finish, it is beautiful considering a price.
Although wrench parts are 12 general angles and there is some GATA, I think that it is a general level and that it is satisfactory from the first since the bolt of this size does not have so large torque.
I think that it is a tool which we can recommend to you since the price is cheap to quality.
View detail
The tool for maintenance in me had only the thing of the plug angles 3/8, but it was [ work of most facts ] sufficient. However, a 30-mm huge socket is required for the stainless lock nut of VJ22A, and it can insert neither a glasses wrench nor the mo
The tool for maintenance in me had only the thing of the plug angles 3/8, but it was [ work of most facts ] sufficient.
However, a 30-mm huge socket is required for the stainless lock nut of VJ22A, and it can insert neither a glasses wrench nor the monkey geometrically.
It worked after all, having added only the socket of this adapters and a required size to its purchase.
Although there was also adhesion and intense torque was required, work was completed satisfactorily at all.
Although an appropriate price is carried out, it is the quality of conviction.
View detail
It purchased in order to exchange rear axle shafts. since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was . Even if it also compares appearance with the socket of KTC, a result seldom has a diff
It purchased in order to exchange rear axle shafts.
since the price was cheap, there was also an uneasy place, but if it uses, it is reliable at all -- it was .
Even if it also compares appearance with the socket of KTC, a result seldom has a difference, and a price is completely different above all.
The tool here is different although it is said that a cheap article tool is not good.
Since it is quite cheap even if it arranges by a set, I think that it is profitable, and I think that it is also good to arrange the size which it does not have individually.
It is recommended anyhow.
View detail
It is solid in reasonable Kami and I thought that it was a recommend.
It is solid in reasonable Kami and I thought that it was a recommend. View detail
It is used for desorption of the foil bolt of a car. Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out. It is
It is used for desorption of the foil bolt of a car.
Although backlash comes out very well in case of the usual cross wrench, there is only an honest tool manufacturer's product truly, it suits with PITARI, and a direction hardly comes out.
It is found useful when fastening a thing which will be troubled if the crack of the nut made from aluminum, etc. is attached.
Although durability is also used by two tire change (studless summer tire) + exchange [ one / brake fluid ] per year per year and is frequently dropped on the concrete of a garage, it hardly has a crack as the photograph.
Although 3/8DR is used for maintenance of a motorcycle in many cases, I make a torque wrench dock with this (1/2DR), and am using it for a fasten lump of foil.
View detail
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make. Since plating processing of comment and all is carried out, compared
Before, while using the extension bar made from an asia, it twisted off by the overtorque, and KTC and this product were compared and purchased by saying in honest manufacturer make.
Since plating processing of comment and all is carried out, compared with the KTC products of a rough form, it is dramatically beautiful at satin finish.
- Since knurling is carried out, it is easy-to-use as a skid at the time of already turning and carrying out.
- I think that it is quite strong structure since it did not fracture even if it applied quite unreasonable torque.
- A price is quite cheaper than KTC products.
Since KTC is also made now in China, since the company of the canada was making this product make from a singapore etc. by OEM, quality had uneasiness, but does it seldom change?
Rather, the quality of plating is a top all the time.
View detail
Since maintenance of the black horse (harley) of MY motorcycle Now Showing requires an inch tool, I am purchasing and using the signet (SIGNET) combination wrench. This tool has very good structure at a mirror tool, and its plating processing is also
Since maintenance of the black horse (harley) of MY motorcycle Now Showing requires an inch tool, I am purchasing and using the signet (SIGNET) combination wrench.
This tool has very good structure at a mirror tool, and its plating processing is also wonderfully beautiful! It is like [ to use as a decoration ].
It seems that many kinds are prepared if a list is seen although he has only the combination wrench in the signet (SIGNET).
By fine work, although I treat empty-handed in many cases, a feel regards me as good to the highest.
Strong bolting or when looser, an angle does not mourn over whether a point of contact with a bolt nut is a field.
Considering an article, a price is very cheap.
Expensive tools, such as snap on, are tools [ recommend / to those who say that it is impossible ] economically.
Please use arranging many things!
View detail