Reviews
Good accuracy
That's a PB
It fits tightly into the hexagon with precision
It looks COLORFUL and rust-resistant, so it's better than cheaper wrenches
I think the costumes are good
However, the first purchase Cost is high
View detail
Easy to use
The best and easiest to use Bit holder.
If it is a BitSingle Item, it will roll over, so the Holder and Quantity:I bought it as a set
There are a couple of them in the toolbox.
View detail
For automotive tools
Carry Bit and CompactRatchet for on-board tools
I'm using this one from Bit holder
The difficulty is that Hold is a little loose, so Bit comes out easily
View detail
It served its purpose
It is purchased at the same time as the 8mm one, and I use it with ANEX's Handlebar
This 10mm was the right choice for the Initial Adjuster adjustment of the Front
The product is well suited for its purpose and I would give it 100 points for its quality and texture
I'm sorry, I didn't feel much Merit sticking out in Others Others has been given an average score
View detail
No problem
It is purchased at the same time as the 10mm one...I use it with ANEX's Handlebar
I can buy more if I need it after using it on a motorcycle, in my car, in my house, and many other things It's about as good as it gets
I'm sorry to say that I didn't feel that there was much of a Merit that stood out, but I'm going to give it all an average score I received it
View detail
When you get used to it, you can distinguish size by color
This is handy!
When you get used to it, you can distinguish the size by color, so the work efficiency went up Also, it simply makes the look of Garage more gorgeous
However, the color itself is a paint job, so it will come off after years of use Even if you treat it roughly, it doesn't peel off so much, so it may be excellent
View detail
Fertilizer tool box
【What made you decide the purchase?】
- Because I possessed precision Phillips Screwdriver made by PB, I will buy Slotted screwdriver as well. Size is the same as the Phillips Screwdriver Smallest No. 00
【How was it actually used?】
- Ease of use like the Phillips Screwdriver, the Grip end rotates to Smooth without resistance, so I could turn Screw securely. However, compared with Phillips Screwdriver, I am concerned that the total length is 10 mm shorter
[Is there anything I was disappointed about?]
- This is also the same as Phillips Screwdriver, but the Gate trace processing that was done when casting the resin of the Grip part is not good finish. Sharpen the convex portion with Design knife
【Hope for Manufacturer - Please let me know if you have any improvement points]
- It is easy to understand if the color of Grip is different by Size
【Have you compared items?】
- ANEX Super fitPrecision Driver
[Others]
- As the usual frequency of use is Precision Driver, even if you have a hobby tool that does not have much activity. The fertility of the tool box has increased ( - ∀ - `)
View detail
Ease of use as expected.
Purchased for Carburetor OH. Satisfied with ease of use as expected.
There is only high, it is also convincing that it is expensive.
However, this Driver's Blade is a Taper type, not a Type with a famous step.
Type with a step is "Swiss grip" It is Type.
View detail
Hickory handle is easy to grasp.
Head diameter 22? Head length 75? Full length 270? Mass 167 g and Small, but it will be useful if you work in a small place. Previously, I used Praghan of Orange made by Snap on from total plastic, but it broke with ParaPara while I was not aware and became unusable and I fell in love with this Hickory handle and bought it. View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I increased the type because I bought it before.
PB 206S - 3 Ball Point Hexagonal Bar Screwdriver I bought earlier was easy to use
I bought 206S-4 and 206S-5.
View detail
I think that Bit of PB is good construction.
I like PB's Drivers, so this time I purchased only PB's Bit. I would like to make every driver I own own PB! "There are quite a lot of PB products that Webike can not purchase." So, if you can improve, I am grateful... View detail
PB is good.
The reason for purchasing this PB Swiss grip Bit driver handle is that it can be exchanged only for the required Bit, that it can be stored in the Compact, and it fell in love with the texture of PB Swiss grip. In this case the tool box, which has become cramped, takes no place. View detail
Hexagonal
I wanted to use the above photo Rainbow from the past, but since the monochromatic type of the bottom photo was sold at bargain at a neighboring tool shop, I bought an impulse.
Easy to use is perfect as it is origami, this Type is Holder is Magnet so Garageetc. It's very convenient because it can be affixed to the wall of.
View detail
Cross Driver
Since I was doing Events at a neighborhood shop, I went to see it, I just bought it.
Events contents are Grip part and Blade part are six colors (Red - Blue - Yellow color - Black - Green - Purple), press-fitted on the spot, I also purchased two unintentionally.
View detail
Easy to use
I bought it for disassembly assembly of Carburetor.
I bought to shorten the maintenance time as it is a Ball point. After all it is safe for PB products. I would like a Lineup of the Ball point Hexagonal Bar Driver which is a little longer if possible.
View detail
Absolute for O-ring
I was using a cheap pick tool, but several times to pierce the O-ring - - - You can also pierce your fingers..
You can also remove Ring that did not get stuck and that stuck firmly. The tip is exquisite.
Piercing Pick tool is working together to clean grooves of Ring removed.
View detail
Try using Big Li!
I tried picking Piston seal with Brake Caliper Maintenance for this product, and I did Big re-use for ease of use.
The thinness of the tip - Perfect angle.
Truly made of PB!
1 pc for family and necessities.
I highly recommend it..
View detail
Various uses
It was mainly used for taking out O-ring, but its use is various.
I took things away from a small place, gently picked it.
Truly made by PB. The angle of bend is exquisite.
It is useful to have 1 pc in the tool box.
View detail
It's fine.
I always use KTC at home, MAC at shop, but I wanted another and bought it.
I was bought for the first time PB but it is quite nice.
Screw will loosen as you cling to it.
It is also nice to have a hexagon at the base.
Although it is good to stick to Manufacturer, since I think that each Manufacturer specialty field is there, I have recently bought and tried various other Manufacturer specializing in specialty fields.
View detail